added basic/basic containing badge defaults

Makefile

@@ -21,6 +21,7 @@ OBJS = main.o
 
 VPATH +=
 OBJS +=
+OBJS += basic/basic.o
 OBJS += eeprom/eeprom.o
 LIBS += core/libcore.a lcd/libfont.a
 

basic/basic.c

@@ -0,0 +1,121 @@
+#include "basic.h"
+#include "core/gpio/gpio.h"
+
+void rbInit() {
+
+    // TODO FIXME special port disable ? LEDs BTNs ?
+
+    // prepare power
+    // TODO FIXME more power init needed ? chrg + volt input ?
+    // enable external vcc
+    gpioSetDir(RB_PWR_GOOD_PORT, RB_PWR_GOOD_PIN, gpioDirection_Output);
+    gpioSetValue (RB_PWR_GOOD_PORT, RB_PWR_GOOD_PIN, 0); 
+
+
+    // prepare buttons
+    gpioSetDir(RB_BTN0_PORT, RB_BTN0_PIN, gpioDirection_Input);
+    gpioSetPullup (&RB_BTN0_IO, gpioPullupMode_PullUp);
+
+    gpioSetDir(RB_BTN1_PORT, RB_BTN1_PIN, gpioDirection_Input);
+    gpioSetPullup (&RB_BTN1_IO, gpioPullupMode_PullUp);
+
+    gpioSetDir(RB_BTN2_PORT, RB_BTN2_PIN, gpioDirection_Input);
+    gpioSetPullup (&RB_BTN2_IO, gpioPullupMode_PullUp);
+
+    gpioSetDir(RB_BTN3_PORT, RB_BTN3_PIN, gpioDirection_Input);
+    gpioSetPullup (&RB_BTN3_IO, gpioPullupMode_PullUp);
+
+    gpioSetDir(RB_BTN4_PORT, RB_BTN4_PIN, gpioDirection_Input);
+    gpioSetPullup (&RB_BTN4_IO, gpioPullupMode_PullUp);
+
+
+    // prepare LEDs
+    gpioSetDir(RB_LED0_PORT, RB_LED0_PIN, gpioDirection_Output);
+    gpioSetValue (RB_LED0_PORT, RB_LED0_PIN, 1); 
+
+    gpioSetDir(RB_LED1_PORT, RB_BTN1_PIN, gpioDirection_Output);
+    gpioSetValue (RB_LED1_PORT, RB_LED1_PIN, 1); 
+
+    gpioSetDir(RB_LED2_PORT, RB_BTN2_PIN, gpioDirection_Output);
+    gpioSetValue (RB_LED2_PORT, RB_LED2_PIN, 1); 
+
+    gpioSetDir(RB_LED3_PORT, RB_LED3_PIN, gpioDirection_Output);
+    gpioSetValue (RB_LED3_PORT, RB_LED3_PIN, 1); 
+
+
+    // prepare IR
+    gpioSetDir(RB_IROUT_PORT, RB_IROUT_PIN, gpioDirection_Output);
+    gpioSetValue (RB_IROUT_PORT, RB_IROUT_PIN, 1); 
+
+    gpioSetDir(RB_IRIN_PORT, RB_IRIN_PIN, gpioDirection_Input);
+    gpioSetPullup (&RB_IRIN_IO, gpioPullupMode_PullUp);
+
+
+    // prepare lcd
+    // TODO FIXME more init needed ?
+    gpioSetDir(RB_LCD_BL_PORT, RB_LCD_BL_PIN, gpioDirection_Output);
+    gpioSetValue (RB_LCD_BL_PORT, RB_LCD_BL_PIN, 1); 
+
+
+    // prepare I2C
+    #ifdef __I2C_h
+	i2cInit(I2CMASTER); // TODO FIXME via define ?
+    #endif
+
+
+    // prepare SPI/SS
+    // TODO FIXME init miso/mosi/sck somehow ?
+    gpioSetDir(RB_SPI_SS0_PORT, RB_SPI_SS0_PIN, gpioDirection_Output);
+    gpioSetValue (RB_SPI_SS0_PORT, RB_SPI_SS0_PIN, 1); 
+
+    gpioSetDir(RB_SPI_SS1_PORT, RB_SPI_SS1_PIN, gpioDirection_Output);
+    gpioSetValue (RB_SPI_SS1_PORT, RB_SPI_SS1_PIN, 1); 
+
+    gpioSetDir(RB_SPI_SS2_PORT, RB_SPI_SS2_PIN, gpioDirection_Output);
+    gpioSetValue (RB_SPI_SS2_PORT, RB_SPI_SS2_PIN, 1); 
+
+    gpioSetDir(RB_SPI_SS3_PORT, RB_SPI_SS3_PIN, gpioDirection_Output);
+    gpioSetValue (RB_SPI_SS3_PORT, RB_SPI_SS3_PIN, 1); 
+
+    gpioSetDir(RB_SPI_SS4_PORT, RB_SPI_SS4_PIN, gpioDirection_Output);
+    gpioSetValue (RB_SPI_SS4_PORT, RB_SPI_SS4_PIN, 1); 
+
+    gpioSetDir(RB_SPI_SS5_PORT, RB_SPI_SS5_PIN, gpioDirection_Output);
+    gpioSetValue (RB_SPI_SS5_PORT, RB_SPI_SS5_PIN, 1); 
+
+
+    // prepare hackerbus
+    gpioSetDir(RB_HB0_PORT, RB_HB0_PIN, gpioDirection_Output);
+    gpioSetValue (RB_HB0_PORT, RB_HB0_PIN, 1); 
+
+    gpioSetDir(RB_HB1_PORT, RB_HB1_PIN, gpioDirection_Output);
+    gpioSetValue (RB_HB1_PORT, RB_HB1_PIN, 1); 
+
+    gpioSetDir(RB_HB2_PORT, RB_HB2_PIN, gpioDirection_Output);
+    gpioSetValue (RB_HB2_PORT, RB_HB2_PIN, 1); 
+
+    gpioSetDir(RB_HB3_PORT, RB_HB3_PIN, gpioDirection_Output);
+    gpioSetValue (RB_HB3_PORT, RB_HB3_PIN, 1); 
+
+    gpioSetDir(RB_HB4_PORT, RB_HB4_PIN, gpioDirection_Output);
+    gpioSetValue (RB_HB4_PORT, RB_HB4_PIN, 1); 
+
+    gpioSetDir(RB_HB5_PORT, RB_HB5_PIN, gpioDirection_Output);
+    gpioSetValue (RB_HB5_PORT, RB_HB5_PIN, 1); 
+
+
+    // prepare BUSINT interrupt
+    gpioSetDir(RB_BUSINT_PORT, RB_BUSINT_PIN, gpioDirection_Input);
+    gpioSetPullup (&RB_BUSINT_IO, gpioPullupMode_PullUp);
+    gpioSetInterrupt(RB_BUSINT_PORT, RB_BUSINT_PIN, gpioInterruptSense_Edge, gpioInterruptEdge_Single, gpioInterruptEvent_ActiveLow);
+    gpioIntEnable(RB_BUSINT_PORT, RB_BUSINT_PIN);
+    //add this to catch interrupt:
+    /*
+	void PIOINT3_IRQHandler(void) {    
+	    if (gpioIntStatus(RB_BUSINT_PORT, RB_BUSINT_PIN)) {
+		// do something
+		gpioIntClear(RB_BUSINT_PORT, RB_BUSINT_PIN);
+	    }
+	}
+    */
+}

basic/basic.h

@@ -0,0 +1,152 @@
+#ifndef __BASIC_H_
+#define __BASIC_H_
+
+#include "core/gpio/gpio.h"
+#include "core/adc/adc.h"
+
+// LED
+#define RB_LED0_PORT		0
+#define RB_LED0_PIN		11
+
+#define RB_LED1_PORT		1
+#define RB_LED1_PIN		7
+
+#define RB_LED2_PORT		1
+#define RB_LED2_PIN		6
+
+#define RB_LED3_PORT		1
+#define RB_LED3_PIN		11
+
+
+// Infrared
+#define RB_IROUT_PORT		1
+#define RB_IROUT_PIN		5
+
+#define RB_IRIN_PORT		1
+#define RB_IRIN_PIN		8
+#define RB_IRIN_IO		IOCON_PIO1_8
+
+
+// Buttons
+#define RB_BTN0_PORT		0
+#define RB_BTN0_PIN		1
+#define RB_BTN0_IO		IOCON_PIO0_1
+
+#define RB_BTN1_PORT		2
+#define RB_BTN1_PIN		9
+#define RB_BTN1_IO		IOCON_PIO2_9
+
+#define RB_BTN2_PORT		2
+#define RB_BTN2_PIN		6
+#define RB_BTN2_IO		IOCON_PIO2_6
+
+#define RB_BTN3_PORT		3
+#define RB_BTN3_PIN		3
+#define RB_BTN3_IO		IOCON_PIO3_3
+
+#define RB_BTN4_PORT		1
+#define RB_BTN4_PIN		4
+#define RB_BTN4_IO		IOCON_PIO1_4
+
+
+// LCD
+#define RB_LCD_BL_PORT		1
+#define RB_LCD_BL_PIN		10
+
+#define RB_LCD_A0_PORT		2
+#define RB_LCD_A0_PIN		0
+
+#define RB_LCD_CS_PORT		2
+#define RB_LCD_CS_PIN		1
+
+#define RB_LCD_RST_PORT		2
+#define RB_LCD_RST_PIN		2
+
+
+// I2C
+#define RB_I2C_SCL_PORT		0
+#define RB_I2C_SCL_PIN		4
+
+#define RB_I2C_SCA_PORT		0
+#define RB_I2C_SCA_PIN		5
+
+
+// SPI
+#define RB_SPI_MISO_PORT	0
+#define RB_SPI_MISO_PIN		8
+
+#define RB_SPI_MOSI_PORT	0
+#define RB_SPI_MOSI_PIN		9
+
+#define RB_SPI_SCK_PORT		0
+#define RB_SPI_SCK_PIN		10
+
+#define RB_SPI_SS0_PORT		2
+#define RB_SPI_SS0_PIN		5
+
+#define RB_SPI_SS1_PORT		2
+#define RB_SPI_SS1_PIN		4
+
+#define RB_SPI_SS2_PORT		2
+#define RB_SPI_SS2_PIN		8
+
+#define RB_SPI_SS3_PORT		3
+#define RB_SPI_SS3_PIN		2
+
+#define RB_SPI_SS4_PORT		3
+#define RB_SPI_SS4_PIN		1
+
+#define RB_SPI_SS5_PORT		2
+#define RB_SPI_SS5_PIN		11
+
+
+// Power
+#define RB_PWR_VOLT_PORT	1
+#define RB_PWR_VOLT_PIN		0
+
+#define RB_PWR_GOOD_PORT	1
+#define RB_PWR_GOOD_PIN		9
+
+#define RB_PWR_CHRG_PORT	2
+#define RB_PWR_CHRG_PIN		3
+
+
+// Hackerbus
+#define RB_HB0_PORT		1
+#define RB_HB0_PIN		3
+#define RB_HB0_IO		IOCON_PIO1_3
+
+#define RB_HB1_PORT		1
+#define RB_HB1_PIN		2
+#define RB_HB1_IO		IOCON_PIO1_2
+
+#define RB_HB2_PORT		1
+#define RB_HB2_PIN		1
+#define RB_HB2_IO		IOCON_PIO1_1
+
+#define RB_HB3_PORT		0
+#define RB_HB3_PIN		2
+#define RB_HB3_IO		IOCON_PIO0_2
+
+#define RB_HB4_PORT		2
+#define RB_HB4_PIN		7
+#define RB_HB4_IO		IOCON_PIO2_7
+
+#define RB_HB5_PORT		0
+#define RB_HB5_PIN		6
+#define RB_HB5_IO		IOCON_PIO0_6
+
+
+// Misc
+#define RB_BUSINT_PORT		3
+#define RB_BUSINT_PIN		0
+#define RB_BUSINT_IO		IOCON_PIO3_0
+
+#define RB_USB_VBUS_PORT	0
+#define RB_USB_VBUS_PIN		3
+
+#define RB_EEPROM_ADDR 		0xA0
+
+void rbInit(void);
+
+#endif