esp-wemos-audioswitcher/firmware_arduino_mini/firmware_arduino_mini.ino

194 lines
4.3 KiB
Arduino
Raw Normal View History

2017-02-21 23:50:55 +00:00
2017-06-10 21:53:38 +00:00
#define PIN_DATA_VOL_A 8
#define PIN_DATA_VOL_B 7
#define PIN_DATA_VOL_C 6
#define PIN_DATA_VOL_D 5
2017-02-21 23:50:55 +00:00
#define PIN_DATA_CLOCK 9
#define PIN_SR_DATA 2
#define PIN_SR_LTCH 3
#define PIN_SR_CLOCK 4
#define PIN_LED 13
2017-06-10 21:53:38 +00:00
// Serial Protocol:
// 9600 Baud
// 1 char: room number 1-5
// 2 char: command v (volume) / r (relais)
// relais command:
// 3 char: a or b
// volume command:
// 3-5 char: 0-100 volume
2017-02-21 23:50:55 +00:00
long tick;
uint16_t relaisData = 0xffff;
void setup() {
2017-06-10 21:53:38 +00:00
Serial.begin(9600);
Serial.setTimeout(100);
2017-02-21 23:50:55 +00:00
pinMode(PIN_DATA_VOL_A, OUTPUT);
pinMode(PIN_DATA_VOL_B, OUTPUT);
pinMode(PIN_DATA_VOL_C, OUTPUT);
pinMode(PIN_DATA_VOL_D, OUTPUT);
pinMode(PIN_DATA_CLOCK, OUTPUT);
pinMode(PIN_SR_DATA, OUTPUT);
pinMode(PIN_SR_LTCH, OUTPUT);
pinMode(PIN_SR_CLOCK, OUTPUT);
pinMode(PIN_LED, OUTPUT);
// shift out one time 0xffff to set all pins high. our relais boards
// are active-low
shiftRelais(relaisData);
2017-06-10 21:53:38 +00:00
setVolume(1, 50);
setVolume(2, 50);
setVolume(3, 50);
setVolume(4, 50);
setVolume(5, 50);
2017-02-21 23:50:55 +00:00
}
void shiftRelais(uint16_t data) {
digitalWrite(PIN_SR_LTCH, LOW);
shiftOut(PIN_SR_DATA, PIN_SR_CLOCK, MSBFIRST, (data >> 8));
2017-06-10 21:53:38 +00:00
shiftOut(PIN_SR_DATA, PIN_SR_CLOCK, MSBFIRST, data & 0xff);
2017-02-21 23:50:55 +00:00
digitalWrite(PIN_SR_LTCH, HIGH);
}
// channel is our "room" 1-5 / state for switching between A or B input
void switchInputs(uint8_t channel, bool state) {
// 16 . . . . . . . . . . . . . . . . . . . 0
// we use a simple switch case with some if instead of
// tricky bitmagic to allow a more visual programming
// of our relais configuration
switch(channel) {
case 1:
if(state) {
relaisData |= _BV(7) | _BV(6);
} else {
relaisData &= ~(_BV(7) | _BV(6));
}
break;
case 2:
if(state) {
relaisData |= _BV(5) | _BV(4);
} else {
relaisData &= ~(_BV(5) | _BV(4));
}
break;
case 3:
if(state) {
relaisData |= _BV(3) | _BV(2);
} else {
relaisData &= ~(_BV(3) | _BV(2));
}
break;
case 4:
if(state) {
relaisData |= _BV(1) | _BV(0);
} else {
relaisData &= ~(_BV(1) | _BV(0));
}
break;
case 5:
if(state) {
2017-06-10 21:53:38 +00:00
relaisData |= (_BV(15) | _BV(14));
2017-02-21 23:50:55 +00:00
} else {
2017-06-10 21:53:38 +00:00
relaisData &= ~(_BV(15) | _BV(14));
2017-02-21 23:50:55 +00:00
}
break;
}
shiftRelais(relaisData);
}
// control a M62429 Chip for Volume Control
// function take from here: http://forum.arduino.cc/index.php?topic=244152.0
void setVolume(uint8_t volume, uint8_t dataPin) {
uint8_t bits;
uint16_t data = 0; // control word is built by OR-ing in the bits
// convert attenuation to volume / remember 0 is full volume!
volume = (volume > 100) ? 0 : (((volume * 83) / -100) + 83);
data |= (0 << 0);
data |= (0 << 1);
data |= ((21 - (volume / 4)) << 2);
data |= ((3 - (volume % 4)) << 7);
data |= (0b11 << 9);
for (bits = 0; bits < 11; bits++) {
_delay_us(2);
digitalWrite(dataPin, 0);
_delay_us (2);
digitalWrite(PIN_DATA_CLOCK, 0);
_delay_us (2);
digitalWrite(dataPin, (data >> bits) & 0x01);
_delay_us (2);
digitalWrite(PIN_DATA_CLOCK, 1);
}
_delay_us(2);
digitalWrite(dataPin, 1); // final clock latches data in
_delay_us (2);
digitalWrite(PIN_DATA_CLOCK, 0);
}
void loop() {
long currentMillis = millis();
2017-06-10 21:53:38 +00:00
if (Serial.available() > 0) {
String ser = Serial.readString();
int room = ser.charAt(0) - 48;
if(room >= 1 && room <= 5) {
char command = ser.charAt(1);
if(command == 'v') { //volume
int datapin=0;
switch(room){
case 1:
datapin=PIN_DATA_VOL_A;
break;
case 2:
datapin=PIN_DATA_VOL_B;
break;
case 3:
datapin=PIN_DATA_VOL_C;
break;
case 4:
datapin=PIN_DATA_VOL_D;
break;
}
int vol=ser.substring(2).toInt();
setVolume(vol,datapin);
} else if(command == 'r') { // relais
char state = ser.charAt(2);
if (state=='a') {
switchInputs(room,true);
} else if (state=='b') {
switchInputs(room,false);
}
} // end if command check
} // end if room check
} // end serial available check
2017-02-21 23:50:55 +00:00
}