95 lines
4.5 KiB
Plaintext
95 lines
4.5 KiB
Plaintext
abgefragt am Thu Jan 9 23:26:06 CET 2020
|
|
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-26-generic] (local build)
|
|
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Hitachi/HGST Ultrastar 7K4000
|
|
Device Model: HGST HUS724020ALE640
|
|
Serial Number: PK2134P5GBYKSX
|
|
LU WWN Device Id: 5 000cca 24ec56f18
|
|
Firmware Version: MJ6OA580
|
|
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
|
Local Time is: Thu Jan 9 23:26:06 2020 CET
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x80) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 28) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 331) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
|
|
2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 85
|
|
3 Spin_Up_Time 0x0007 123 123 024 Pre-fail Always - 503 (Average 506)
|
|
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 21
|
|
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
|
|
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
|
|
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 16583
|
|
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
|
|
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21
|
|
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 675
|
|
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 675
|
|
194 Temperature_Celsius 0x0002 253 253 000 Old_age Always - 20 (Min/Max 17/51)
|
|
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
|
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|