117 lines
6.2 KiB
Plaintext
117 lines
6.2 KiB
Plaintext
abgefragt am Thu Jan 9 23:17:40 CET 2020
|
|
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-26-generic] (local build)
|
|
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Western Digital RE3 Serial ATA
|
|
Device Model: WDC WD3202ABYS-02B7A0
|
|
Serial Number: WD-WCAT1H381474
|
|
LU WWN Device Id: 5 0014ee 158af1201
|
|
Firmware Version: 02.03B03
|
|
User Capacity: 320,072,933,376 bytes [320 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: 7200 rpm
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS (minor revision not indicated)
|
|
SATA Version is: SATA 2.5, 3.0 Gb/s
|
|
Local Time is: Thu Jan 9 23:17:40 2020 CET
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x84) Offline data collection activity
|
|
was suspended by an interrupting command from host.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 6000) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 73) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 5) minutes.
|
|
SCT capabilities: (0x303f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
|
|
3 Spin_Up_Time 0x0027 200 195 021 Pre-fail Always - 991
|
|
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 61
|
|
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
|
|
9 Power_On_Hours 0x0032 045 045 000 Old_age Always - 40206
|
|
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
|
|
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
|
|
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 58
|
|
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 40
|
|
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 20
|
|
194 Temperature_Celsius 0x0022 124 091 000 Old_age Always - 19
|
|
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
|
|
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
|
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 27074 -
|
|
# 2 Short offline Completed without error 00% 26906 -
|
|
# 3 Short offline Completed without error 00% 26738 -
|
|
# 4 Short offline Completed without error 00% 26570 -
|
|
# 5 Short offline Completed without error 00% 26402 -
|
|
# 6 Short offline Completed without error 00% 26235 -
|
|
# 7 Short offline Completed without error 00% 26067 -
|
|
# 8 Short offline Completed without error 00% 25899 -
|
|
# 9 Short offline Completed without error 00% 25731 -
|
|
#10 Short offline Completed without error 00% 25564 -
|
|
#11 Short offline Completed without error 00% 25396 -
|
|
#12 Short offline Completed without error 00% 25228 -
|
|
#13 Short offline Completed without error 00% 25060 -
|
|
#14 Short offline Completed without error 00% 24892 -
|
|
#15 Short offline Completed without error 00% 24724 -
|
|
#16 Short offline Completed without error 00% 24557 -
|
|
#17 Short offline Completed without error 00% 24389 -
|
|
#18 Short offline Completed without error 00% 24221 -
|
|
#19 Short offline Completed without error 00% 24053 -
|
|
#20 Short offline Completed without error 00% 23885 -
|
|
#21 Short offline Completed without error 00% 23718 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|