twitter-status-bot/.gems/gems/addressable-2.3.6/lib/addressable/idna/pure.rb

670 lines
20 KiB
Ruby

# encoding:utf-8
#--
# Copyright (C) 2006-2013 Bob Aman
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#++
module Addressable
module IDNA
# This module is loosely based on idn_actionmailer by Mick Staugaard,
# the unicode library by Yoshida Masato, and the punycode implementation
# by Kazuhiro Nishiyama. Most of the code was copied verbatim, but
# some reformatting was done, and some translation from C was done.
#
# Without their code to work from as a base, we'd all still be relying
# on the presence of libidn. Which nobody ever seems to have installed.
#
# Original sources:
# http://github.com/staugaard/idn_actionmailer
# http://www.yoshidam.net/Ruby.html#unicode
# http://rubyforge.org/frs/?group_id=2550
UNICODE_TABLE = File.expand_path(
File.join(File.dirname(__FILE__), '../../..', 'data/unicode.data')
)
ACE_PREFIX = "xn--"
UTF8_REGEX = /\A(?:
[\x09\x0A\x0D\x20-\x7E] # ASCII
| [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
| \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
| [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte
| \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates
| \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3
| [\xF1-\xF3][\x80-\xBF]{3} # planes 4nil5
| \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
)*\z/mnx
UTF8_REGEX_MULTIBYTE = /(?:
[\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
| \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
| [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte
| \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates
| \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3
| [\xF1-\xF3][\x80-\xBF]{3} # planes 4nil5
| \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
)/mnx
# :startdoc:
# Converts from a Unicode internationalized domain name to an ASCII
# domain name as described in RFC 3490.
def self.to_ascii(input)
input = input.dup
if input.respond_to?(:force_encoding)
input.force_encoding(Encoding::ASCII_8BIT)
end
if input =~ UTF8_REGEX && input =~ UTF8_REGEX_MULTIBYTE
parts = unicode_downcase(input).split('.')
parts.map! do |part|
if part.respond_to?(:force_encoding)
part.force_encoding(Encoding::ASCII_8BIT)
end
if part =~ UTF8_REGEX && part =~ UTF8_REGEX_MULTIBYTE
ACE_PREFIX + punycode_encode(unicode_normalize_kc(part))
else
part
end
end
parts.join('.')
else
input
end
end
# Converts from an ASCII domain name to a Unicode internationalized
# domain name as described in RFC 3490.
def self.to_unicode(input)
parts = input.split('.')
parts.map! do |part|
if part =~ /^#{ACE_PREFIX}/
punycode_decode(part[/^#{ACE_PREFIX}(.+)/, 1])
else
part
end
end
output = parts.join('.')
if output.respond_to?(:force_encoding)
output.force_encoding(Encoding::UTF_8)
end
output
end
# Unicode normalization form KC.
def self.unicode_normalize_kc(input)
input = input.to_s unless input.is_a?(String)
unpacked = input.unpack("U*")
unpacked =
unicode_compose(unicode_sort_canonical(unicode_decompose(unpacked)))
return unpacked.pack("U*")
end
##
# Unicode aware downcase method.
#
# @api private
# @param [String] input
# The input string.
# @return [String] The downcased result.
def self.unicode_downcase(input)
unpacked = input.unpack("U*")
unpacked.map! { |codepoint| lookup_unicode_lowercase(codepoint) }
return unpacked.pack("U*")
end
(class <<self; private :unicode_downcase; end)
def self.unicode_compose(unpacked)
unpacked_result = []
length = unpacked.length
return unpacked if length == 0
starter = unpacked[0]
starter_cc = lookup_unicode_combining_class(starter)
starter_cc = 256 if starter_cc != 0
for i in 1...length
ch = unpacked[i]
cc = lookup_unicode_combining_class(ch)
if (starter_cc == 0 &&
(composite = unicode_compose_pair(starter, ch)) != nil)
starter = composite
startercc = lookup_unicode_combining_class(composite)
else
unpacked_result << starter
starter = ch
startercc = cc
end
end
unpacked_result << starter
return unpacked_result
end
(class <<self; private :unicode_compose; end)
def self.unicode_compose_pair(ch_one, ch_two)
if ch_one >= HANGUL_LBASE && ch_one < HANGUL_LBASE + HANGUL_LCOUNT &&
ch_two >= HANGUL_VBASE && ch_two < HANGUL_VBASE + HANGUL_VCOUNT
# Hangul L + V
return HANGUL_SBASE + (
(ch_one - HANGUL_LBASE) * HANGUL_VCOUNT + (ch_two - HANGUL_VBASE)
) * HANGUL_TCOUNT
elsif ch_one >= HANGUL_SBASE &&
ch_one < HANGUL_SBASE + HANGUL_SCOUNT &&
(ch_one - HANGUL_SBASE) % HANGUL_TCOUNT == 0 &&
ch_two >= HANGUL_TBASE && ch_two < HANGUL_TBASE + HANGUL_TCOUNT
# Hangul LV + T
return ch_one + (ch_two - HANGUL_TBASE)
end
p = []
ucs4_to_utf8 = lambda do |ch|
# For some reason, rcov likes to drop BUS errors here.
if ch < 128
p << ch
elsif ch < 2048
p << (ch >> 6 | 192)
p << (ch & 63 | 128)
elsif ch < 0x10000
p << (ch >> 12 | 224)
p << (ch >> 6 & 63 | 128)
p << (ch & 63 | 128)
elsif ch < 0x200000
p << (ch >> 18 | 240)
p << (ch >> 12 & 63 | 128)
p << (ch >> 6 & 63 | 128)
p << (ch & 63 | 128)
elsif ch < 0x4000000
p << (ch >> 24 | 248)
p << (ch >> 18 & 63 | 128)
p << (ch >> 12 & 63 | 128)
p << (ch >> 6 & 63 | 128)
p << (ch & 63 | 128)
elsif ch < 0x80000000
p << (ch >> 30 | 252)
p << (ch >> 24 & 63 | 128)
p << (ch >> 18 & 63 | 128)
p << (ch >> 12 & 63 | 128)
p << (ch >> 6 & 63 | 128)
p << (ch & 63 | 128)
end
end
ucs4_to_utf8.call(ch_one)
ucs4_to_utf8.call(ch_two)
return lookup_unicode_composition(p)
end
(class <<self; private :unicode_compose_pair; end)
def self.unicode_sort_canonical(unpacked)
unpacked = unpacked.dup
i = 1
length = unpacked.length
return unpacked if length < 2
while i < length
last = unpacked[i-1]
ch = unpacked[i]
last_cc = lookup_unicode_combining_class(last)
cc = lookup_unicode_combining_class(ch)
if cc != 0 && last_cc != 0 && last_cc > cc
unpacked[i] = last
unpacked[i-1] = ch
i -= 1 if i > 1
else
i += 1
end
end
return unpacked
end
(class <<self; private :unicode_sort_canonical; end)
def self.unicode_decompose(unpacked)
unpacked_result = []
for cp in unpacked
if cp >= HANGUL_SBASE && cp < HANGUL_SBASE + HANGUL_SCOUNT
l, v, t = unicode_decompose_hangul(cp)
unpacked_result << l
unpacked_result << v if v
unpacked_result << t if t
else
dc = lookup_unicode_compatibility(cp)
unless dc
unpacked_result << cp
else
unpacked_result.concat(unicode_decompose(dc.unpack("U*")))
end
end
end
return unpacked_result
end
(class <<self; private :unicode_decompose; end)
def self.unicode_decompose_hangul(codepoint)
sindex = codepoint - HANGUL_SBASE;
if sindex < 0 || sindex >= HANGUL_SCOUNT
l = codepoint
v = t = nil
return l, v, t
end
l = HANGUL_LBASE + sindex / HANGUL_NCOUNT
v = HANGUL_VBASE + (sindex % HANGUL_NCOUNT) / HANGUL_TCOUNT
t = HANGUL_TBASE + sindex % HANGUL_TCOUNT
if t == HANGUL_TBASE
t = nil
end
return l, v, t
end
(class <<self; private :unicode_decompose_hangul; end)
def self.lookup_unicode_combining_class(codepoint)
codepoint_data = UNICODE_DATA[codepoint]
(codepoint_data ?
(codepoint_data[UNICODE_DATA_COMBINING_CLASS] || 0) :
0)
end
(class <<self; private :lookup_unicode_combining_class; end)
def self.lookup_unicode_compatibility(codepoint)
codepoint_data = UNICODE_DATA[codepoint]
(codepoint_data ?
codepoint_data[UNICODE_DATA_COMPATIBILITY] : nil)
end
(class <<self; private :lookup_unicode_compatibility; end)
def self.lookup_unicode_lowercase(codepoint)
codepoint_data = UNICODE_DATA[codepoint]
(codepoint_data ?
(codepoint_data[UNICODE_DATA_LOWERCASE] || codepoint) :
codepoint)
end
(class <<self; private :lookup_unicode_lowercase; end)
def self.lookup_unicode_composition(unpacked)
return COMPOSITION_TABLE[unpacked]
end
(class <<self; private :lookup_unicode_composition; end)
HANGUL_SBASE = 0xac00
HANGUL_LBASE = 0x1100
HANGUL_LCOUNT = 19
HANGUL_VBASE = 0x1161
HANGUL_VCOUNT = 21
HANGUL_TBASE = 0x11a7
HANGUL_TCOUNT = 28
HANGUL_NCOUNT = HANGUL_VCOUNT * HANGUL_TCOUNT # 588
HANGUL_SCOUNT = HANGUL_LCOUNT * HANGUL_NCOUNT # 11172
UNICODE_DATA_COMBINING_CLASS = 0
UNICODE_DATA_EXCLUSION = 1
UNICODE_DATA_CANONICAL = 2
UNICODE_DATA_COMPATIBILITY = 3
UNICODE_DATA_UPPERCASE = 4
UNICODE_DATA_LOWERCASE = 5
UNICODE_DATA_TITLECASE = 6
begin
if defined?(FakeFS)
fakefs_state = FakeFS.activated?
FakeFS.deactivate!
end
# This is a sparse Unicode table. Codepoints without entries are
# assumed to have the value: [0, 0, nil, nil, nil, nil, nil]
UNICODE_DATA = File.open(UNICODE_TABLE, "rb") do |file|
Marshal.load(file.read)
end
ensure
if defined?(FakeFS)
FakeFS.activate! if fakefs_state
end
end
COMPOSITION_TABLE = {}
for codepoint, data in UNICODE_DATA
canonical = data[UNICODE_DATA_CANONICAL]
exclusion = data[UNICODE_DATA_EXCLUSION]
if canonical && exclusion == 0
COMPOSITION_TABLE[canonical.unpack("C*")] = codepoint
end
end
UNICODE_MAX_LENGTH = 256
ACE_MAX_LENGTH = 256
PUNYCODE_BASE = 36
PUNYCODE_TMIN = 1
PUNYCODE_TMAX = 26
PUNYCODE_SKEW = 38
PUNYCODE_DAMP = 700
PUNYCODE_INITIAL_BIAS = 72
PUNYCODE_INITIAL_N = 0x80
PUNYCODE_DELIMITER = 0x2D
PUNYCODE_MAXINT = 1 << 64
PUNYCODE_PRINT_ASCII =
"\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n" +
"\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n" +
" !\"\#$%&'()*+,-./" +
"0123456789:;<=>?" +
"@ABCDEFGHIJKLMNO" +
"PQRSTUVWXYZ[\\]^_" +
"`abcdefghijklmno" +
"pqrstuvwxyz{|}~\n"
# Input is invalid.
class PunycodeBadInput < StandardError; end
# Output would exceed the space provided.
class PunycodeBigOutput < StandardError; end
# Input needs wider integers to process.
class PunycodeOverflow < StandardError; end
def self.punycode_encode(unicode)
input = unicode.unpack("U*")
output = [0] * (ACE_MAX_LENGTH + 1)
input_length = input.size
output_length = [ACE_MAX_LENGTH]
# Initialize the state
n = PUNYCODE_INITIAL_N
delta = out = 0
max_out = output_length[0]
bias = PUNYCODE_INITIAL_BIAS
# Handle the basic code points:
input_length.times do |j|
if punycode_basic?(input[j])
if max_out - out < 2
raise PunycodeBigOutput,
"Output would exceed the space provided."
end
output[out] = input[j]
out += 1
end
end
h = b = out
# h is the number of code points that have been handled, b is the
# number of basic code points, and out is the number of characters
# that have been output.
if b > 0
output[out] = PUNYCODE_DELIMITER
out += 1
end
# Main encoding loop:
while h < input_length
# All non-basic code points < n have been
# handled already. Find the next larger one:
m = PUNYCODE_MAXINT
input_length.times do |j|
m = input[j] if (n...m) === input[j]
end
# Increase delta enough to advance the decoder's
# <n,i> state to <m,0>, but guard against overflow:
if m - n > (PUNYCODE_MAXINT - delta) / (h + 1)
raise PunycodeOverflow, "Input needs wider integers to process."
end
delta += (m - n) * (h + 1)
n = m
input_length.times do |j|
# Punycode does not need to check whether input[j] is basic:
if input[j] < n
delta += 1
if delta == 0
raise PunycodeOverflow,
"Input needs wider integers to process."
end
end
if input[j] == n
# Represent delta as a generalized variable-length integer:
q = delta; k = PUNYCODE_BASE
while true
if out >= max_out
raise PunycodeBigOutput,
"Output would exceed the space provided."
end
t = (
if k <= bias
PUNYCODE_TMIN
elsif k >= bias + PUNYCODE_TMAX
PUNYCODE_TMAX
else
k - bias
end
)
break if q < t
output[out] =
punycode_encode_digit(t + (q - t) % (PUNYCODE_BASE - t))
out += 1
q = (q - t) / (PUNYCODE_BASE - t)
k += PUNYCODE_BASE
end
output[out] = punycode_encode_digit(q)
out += 1
bias = punycode_adapt(delta, h + 1, h == b)
delta = 0
h += 1
end
end
delta += 1
n += 1
end
output_length[0] = out
outlen = out
outlen.times do |j|
c = output[j]
unless c >= 0 && c <= 127
raise Exception, "Invalid output char."
end
unless PUNYCODE_PRINT_ASCII[c]
raise PunycodeBadInput, "Input is invalid."
end
end
output[0..outlen].map { |x| x.chr }.join("").sub(/\0+\z/, "")
end
(class <<self; private :punycode_encode; end)
def self.punycode_decode(punycode)
input = []
output = []
if ACE_MAX_LENGTH * 2 < punycode.size
raise PunycodeBigOutput, "Output would exceed the space provided."
end
punycode.each_byte do |c|
unless c >= 0 && c <= 127
raise PunycodeBadInput, "Input is invalid."
end
input.push(c)
end
input_length = input.length
output_length = [UNICODE_MAX_LENGTH]
# Initialize the state
n = PUNYCODE_INITIAL_N
out = i = 0
max_out = output_length[0]
bias = PUNYCODE_INITIAL_BIAS
# Handle the basic code points: Let b be the number of input code
# points before the last delimiter, or 0 if there is none, then
# copy the first b code points to the output.
b = 0
input_length.times do |j|
b = j if punycode_delimiter?(input[j])
end
if b > max_out
raise PunycodeBigOutput, "Output would exceed the space provided."
end
b.times do |j|
unless punycode_basic?(input[j])
raise PunycodeBadInput, "Input is invalid."
end
output[out] = input[j]
out+=1
end
# Main decoding loop: Start just after the last delimiter if any
# basic code points were copied; start at the beginning otherwise.
in_ = b > 0 ? b + 1 : 0
while in_ < input_length
# in_ is the index of the next character to be consumed, and
# out is the number of code points in the output array.
# Decode a generalized variable-length integer into delta,
# which gets added to i. The overflow checking is easier
# if we increase i as we go, then subtract off its starting
# value at the end to obtain delta.
oldi = i; w = 1; k = PUNYCODE_BASE
while true
if in_ >= input_length
raise PunycodeBadInput, "Input is invalid."
end
digit = punycode_decode_digit(input[in_])
in_+=1
if digit >= PUNYCODE_BASE
raise PunycodeBadInput, "Input is invalid."
end
if digit > (PUNYCODE_MAXINT - i) / w
raise PunycodeOverflow, "Input needs wider integers to process."
end
i += digit * w
t = (
if k <= bias
PUNYCODE_TMIN
elsif k >= bias + PUNYCODE_TMAX
PUNYCODE_TMAX
else
k - bias
end
)
break if digit < t
if w > PUNYCODE_MAXINT / (PUNYCODE_BASE - t)
raise PunycodeOverflow, "Input needs wider integers to process."
end
w *= PUNYCODE_BASE - t
k += PUNYCODE_BASE
end
bias = punycode_adapt(i - oldi, out + 1, oldi == 0)
# I was supposed to wrap around from out + 1 to 0,
# incrementing n each time, so we'll fix that now:
if i / (out + 1) > PUNYCODE_MAXINT - n
raise PunycodeOverflow, "Input needs wider integers to process."
end
n += i / (out + 1)
i %= out + 1
# Insert n at position i of the output:
# not needed for Punycode:
# raise PUNYCODE_INVALID_INPUT if decode_digit(n) <= base
if out >= max_out
raise PunycodeBigOutput, "Output would exceed the space provided."
end
#memmove(output + i + 1, output + i, (out - i) * sizeof *output)
output[i + 1, out - i] = output[i, out - i]
output[i] = n
i += 1
out += 1
end
output_length[0] = out
output.pack("U*")
end
(class <<self; private :punycode_decode; end)
def self.punycode_basic?(codepoint)
codepoint < 0x80
end
(class <<self; private :punycode_basic?; end)
def self.punycode_delimiter?(codepoint)
codepoint == PUNYCODE_DELIMITER
end
(class <<self; private :punycode_delimiter?; end)
def self.punycode_encode_digit(d)
d + 22 + 75 * ((d < 26) ? 1 : 0)
end
(class <<self; private :punycode_encode_digit; end)
# Returns the numeric value of a basic codepoint
# (for use in representing integers) in the range 0 to
# base - 1, or PUNYCODE_BASE if codepoint does not represent a value.
def self.punycode_decode_digit(codepoint)
if codepoint - 48 < 10
codepoint - 22
elsif codepoint - 65 < 26
codepoint - 65
elsif codepoint - 97 < 26
codepoint - 97
else
PUNYCODE_BASE
end
end
(class <<self; private :punycode_decode_digit; end)
# Bias adaptation method
def self.punycode_adapt(delta, numpoints, firsttime)
delta = firsttime ? delta / PUNYCODE_DAMP : delta >> 1
# delta >> 1 is a faster way of doing delta / 2
delta += delta / numpoints
difference = PUNYCODE_BASE - PUNYCODE_TMIN
k = 0
while delta > (difference * PUNYCODE_TMAX) / 2
delta /= difference
k += PUNYCODE_BASE
end
k + (difference + 1) * delta / (delta + PUNYCODE_SKEW)
end
(class <<self; private :punycode_adapt; end)
end
# :startdoc:
end