From bb37e88094c6ed4193b1de45d56d6fece84518d3 Mon Sep 17 00:00:00 2001 From: maniacbug Date: Wed, 6 Jul 2011 19:59:06 -0700 Subject: [PATCH] Initial checking of new pingpair_irq example. Right now this is just the pingpair example but renamed. --- examples/pingpair_irq/Jamfile | 206 +++++++++++++++++++++++++ examples/pingpair_irq/pingpair_irq.pde | 180 +++++++++++++++++++++ examples/pingpair_irq/printf.h | 33 ++++ 3 files changed, 419 insertions(+) create mode 100644 examples/pingpair_irq/Jamfile create mode 100644 examples/pingpair_irq/pingpair_irq.pde create mode 100644 examples/pingpair_irq/printf.h diff --git a/examples/pingpair_irq/Jamfile b/examples/pingpair_irq/Jamfile new file mode 100644 index 0000000..901f8da --- /dev/null +++ b/examples/pingpair_irq/Jamfile @@ -0,0 +1,206 @@ +PROJECT_NAME = $(PWD:B) ; +PROJECT_DIR = . ; +PROJECT_LIBS = SPI RF24 ; + +OUT_DIR = ojam ; +F_CPU = 16000000 ; +MCU = atmega328p ; +PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; + +UPLOAD_RATE = 57600 ; +AVRDUDE_PROTOCOL = stk500v1 ; +COM = 33 ; + +# Host-specific overrides for locations +if $(OS) = MACOSX +{ +ARDUINO_VERSION = 22 ; +OLD_DIR = /opt/arduino-0021 ; +AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; +AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; +ARDUINO_DIR = /opt/Arduino ; +ARDUINO_AVR = /usr/lib/avr/include ; +} + +# Where is everything? +ARDUINO_VERSION ?= 22 ; +AVR_TOOLS_PATH ?= /usr/bin ; +ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; +ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; +AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; +ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; +ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; +SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; +AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; +AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; + +DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; +CTUNING = -ffunction-sections -fdata-sections ; +CXXTUNING = -fno-exceptions -fno-strict-aliasing ; +CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; +CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; +LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; + +# Search everywhere for headers +HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; + +# Grab everything from the core directory +CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; + +# Grab everything from libraries. To avoid this "grab everything" behaviour, you +# can specify specific modules to pick up in PROJECT_MODULES +LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; + +# In addition to explicitly-specified program modules, pick up anything from the current +# dir. +PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; + +# Shortcut for the out files +OUT = $(OUT_DIR)/$(PROJECT_NAME) ; + +# AvrDude setup +AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; + +rule GitVersion +{ + Always $(<) ; + Depends all : $(<) ; +} + +actions GitVersion +{ + echo "const char program_version[] = \"\\" > $(<) + git log -1 --pretty=format:%h >> $(<) + echo "\";" >> $(<) +} + +GitVersion version.h ; + +rule AvrCc +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrCc +{ + $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) +} + +rule AvrC++ +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrC++ +{ + $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) +} + +rule Pde +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + +} + +actions Pde +{ + echo "#include " > $(<) + echo "#line 1 \"$(>)\"" >> $(<) + cat $(>) >> $(<) +} + +rule AvrPde +{ + local _CPP = $(OUT_DIR)/$(_I:B).cpp ; + Pde $(_CPP) : $(>) ; + AvrC++ $(<) : $(_CPP) ; +} + +rule AvrObject +{ + switch $(>:S) + { + case .c : AvrCc $(<) : $(>) ; + case .cpp : AvrC++ $(<) : $(>) ; + case .pde : AvrPde $(<) : $(>) ; + } +} + +rule AvrObjects +{ + for _I in $(<) + { + AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; + } +} + +rule AvrMainFromObjects +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + MkDir $(<:D) ; + Depends all : $(<) ; + Clean clean : $(<) ; +} + +actions AvrMainFromObjects +{ + $(AVR_LD) $(LDFLAGS) -o $(<) $(>) +} + +rule AvrMain +{ + AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; + AvrObjects $(>) ; +} + +rule AvrHex +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Depends hex : $(<) ; + Clean clean : $(<) ; +} + +actions AvrHex +{ + $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) +} + +rule AvrUpload +{ + Depends $(1) : $(2) ; + Depends $(2) : $(3) ; + NotFile $(1) ; + Always $(1) ; + Always $(2) ; + AvrUploadAction $(2) : $(3) ; +} + +actions AvrUploadAction +{ + $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i +} + +AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; +AvrHex $(OUT).hex : $(OUT).elf ; + +AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; +AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; +AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; + diff --git a/examples/pingpair_irq/pingpair_irq.pde b/examples/pingpair_irq/pingpair_irq.pde new file mode 100644 index 0000000..b014e9b --- /dev/null +++ b/examples/pingpair_irq/pingpair_irq.pde @@ -0,0 +1,180 @@ +/* + Copyright (C) 2011 James Coliz, Jr. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + version 2 as published by the Free Software Foundation. + */ + +/** + * Example of using Ack Payloads + * + * This is an example of how to do two-way communication without changing + * transmit/receive modes. Here, a payload is set to the transmitter within + * the Ack packet of each transmission. Note that the payload is set BEFORE + * the sender's message arrives. + */ + +#include +#include "nRF24L01.h" +#include "RF24.h" +#include "printf.h" + +// +// Hardware configuration +// + +// Set up nRF24L01 radio on SPI bus plus pins 8 & 9 + +RF24 radio(8,9); + +// sets the role of this unit in hardware. Connect to GND to be the 'pong' receiver +// Leave open to be the 'ping' transmitter +const short role_pin = 7; + +// +// Topology +// + +// Single radio pipe address for the 2 nodes to communicate. +const uint64_t pipe = 0xE8E8F0F0E1LL; + +// +// Role management +// +// Set up role. This sketch uses the same software for all the nodes in this +// system. Doing so greatly simplifies testing. The hardware itself specifies +// which node it is. +// +// This is done through the role_pin +// + +// The various roles supported by this sketch +typedef enum { role_sender = 1, role_receiver } role_e; + +// The debug-friendly names of those roles +const char* role_friendly_name[] = { "invalid", "Sender", "Receiver"}; + +// The role of the current running sketch +role_e role; + +void setup(void) +{ + // + // Role + // + + // set up the role pin + pinMode(role_pin, INPUT); + digitalWrite(role_pin,HIGH); + delay(20); // Just to get a solid reading on the role pin + + // read the address pin, establish our role + if ( digitalRead(role_pin) ) + role = role_sender; + else + role = role_receiver; + + // + // Print preamble + // + + Serial.begin(57600); + printf_begin(); + printf("\n\rRF24/examples/pingpair_pl/\n\r"); + printf("ROLE: %s\n\r",role_friendly_name[role]); + + // + // Setup and configure rf radio + // + + radio.begin(); + + // We will be using the Ack Payload feature, so please enable it + radio.enableAckPayload(); + + // + // Open pipes to other nodes for communication + // + + // This simple sketch opens a single pipes for these two nodes to communicate + // back and forth. One listens on it, the other talks to it. + + if ( role == role_sender ) + { + radio.openWritingPipe(pipe); + } + else + { + radio.openReadingPipe(1,pipe); + } + + // + // Start listening + // + + if ( role == role_receiver ) + radio.startListening(); + + // + // Dump the configuration of the rf unit for debugging + // + + radio.printDetails(); +} + +void loop(void) +{ + static uint32_t message_count = 0; + + // + // Sender role. Repeatedly send the current time + // + + if (role == role_sender) + { + // Take the time, and send it. This will block until complete + unsigned long time = millis(); + printf("Now sending %lu...",time); + radio.write( &time, sizeof(unsigned long) ); + + if ( radio.isAckPayloadAvailable() ) + { + radio.read(&message_count,sizeof(message_count)); + printf("Ack: [%lu] ",message_count); + } + printf("OK\n\r"); + + // Try again soon + delay(2000); + } + + // + // Receiver role. Receive each packet, dump it out, add ack payload for next time + // + + if ( role == role_receiver ) + { + // if there is data ready + if ( radio.available() ) + { + // Dump the payloads until we've gotten everything + static unsigned long got_time; + boolean done = false; + while (!done) + { + // Fetch the payload, and see if this was the last one. + done = radio.read( &got_time, sizeof(unsigned long) ); + + // Spew it + printf("Got payload %lu\n",got_time); + } + + // Add an ack packet for the next time around. This is a simple + // packet counter + radio.writeAckPayload( 1, &message_count, sizeof(message_count) ); + ++message_count; + } + } +} +// vim:ai:cin:sts=2 sw=2 ft=cpp diff --git a/examples/pingpair_irq/printf.h b/examples/pingpair_irq/printf.h new file mode 100644 index 0000000..df6c46a --- /dev/null +++ b/examples/pingpair_irq/printf.h @@ -0,0 +1,33 @@ +/* + Copyright (C) 2011 James Coliz, Jr. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + version 2 as published by the Free Software Foundation. + */ + +/** + * @file printf.h + * + * Setup necessary to direct stdout to the Arduino Serial library, which + * enables 'printf' + */ + +#ifndef __PRINTF_H__ +#define __PRINTF_H__ + +#include "WProgram.h" + +int serial_putc( char c, FILE * ) +{ + Serial.write( c ); + + return c; +} + +void printf_begin(void) +{ + fdevopen( &serial_putc, 0 ); +} + +#endif // __PRINTF_H__