diff --git a/platformio.ini b/platformio.ini index 61061bd..e9d6a8b 100644 --- a/platformio.ini +++ b/platformio.ini @@ -12,9 +12,10 @@ [platformio] #For Config upload comment in data_dir line and flash with platformio run -t uploadfs --environment sensorespx -data_dir=data_sensoresp1 -#data_dir=data_sensoresp3 +#data_dir=data_sensoresp1 +#data_dir=data_sensoresp3 +data_dir=data_sensoresp4 #Arbeitszimmer [env:sensoresp1] @@ -82,3 +83,41 @@ lib_deps = adafruit/DHT sensor library@1.3.10 BH1750@1.1.4 Homie@3.0.0 + + +#Schlafzimmer +[env:sensoresp4] +platform = espressif8266 +board = d1_mini +framework = arduino + +monitor_port = /dev/ttyUSB0 +monitor_speed = 115200 + +build_flags = + -D SENSOR_DHT22 + -D DHTPIN=D7 + -D dataDHT22_temperature_minchange=0.1 + -D dataDHT22_humidity_minchange=1.0 + + -D SENSOR_PIR + -D PIRPIN=D0 + -D dataPIR_readdelay=100 + -D dataPIR_senddelaymax=1000*60*10 + + -D SENSOR_BH1750 + -D dataBH1750_minchange=10.0 + -D dataBH1750_senddelaymax=1000*60*2 + + -D SENSOR_MHZ19 + -D MHZ19_SERIAL_RX=D5 + -D MHZ19_SERIAL_TX=D6 + -D dataMHZ19_minchange=10 + -D dataMHZ19_readdelay=10*1000 + +lib_deps = + adafruit/DHT sensor library@1.3.10 + BH1750@1.1.4 + MHZ19@0.0.1 + EspSoftwareSerial@6.8.1 + Homie@3.0.0 \ No newline at end of file diff --git a/src/main.cpp b/src/main.cpp index e856695..f3c5d90 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -1,7 +1,8 @@ //#define DEBUG //Compile with platformio run --environment sensorespx -//Spiffs data upload with: platformio run -t uploadfs --environment sensorespx +//Compile and upload: platformio run --environment sensorespx -t upload +//Spiffs data upload with (comment in data_dir line unter platformio section): platformio run --environment sensorespx -t uploadfs /* DELETE BELOW // DHT22 @@ -26,7 +27,9 @@ #define FW_NAME "sensoresp" //gets printed on topic/$fw/name #define FW_VERSION "1.0.0" //gets printed on topic/$fw/version +#ifdef SENSOR_LDR int get_lux(const unsigned int* _in, const unsigned int* _out, byte size); //for analog ldr light calculation +#endif struct sensordata { @@ -73,8 +76,8 @@ struct sensordata #ifdef SENSOR_PIR -// PIR Sensors HC-SR501 (modified to put out shortest pulse time) - //pir sensor needs 5v. output level is 3.3v +// PIR Sensors HC-SR501 (modified to put out shortest pulse time short pins 5 and 6 of ic) + //pir sensor needs 5v through an inductor for filtering. output level is 3.3v sensordata dataPIR; bool value_PIR=false; #endif @@ -91,7 +94,28 @@ struct sensordata #endif #endif +#ifdef SENSOR_MHZ19 + struct sensordata dataMHZ19; + /* + * MHZ19 Library: https://platformio.org/lib/show/1620/SevSegSPI + * Software Serial Library: https://platformio.org/lib/show/168/EspSoftwareSerial + * SDS018 example: https://github.com/crystaldust/sds018/blob/master/sds018.ino + */ + // SW Serial + //SW Serial RX: to mhz19 tx (green cable) + //SW Serial TX: to mhz19 rx (blue cable) + //co2 sensor needs 5v + #include + + SoftwareSerial mhz19_swSerial; + #define BAUD_RATE_MHZ19 9600 + + #include + MHZ19 mhz19; + bool mhz19_ready=false; + int value_co2=-1; //[ppm] +#endif // data/homie/config.json hochladen mit platformio run --target uploadfs // config contains homie device name, mqtt ip and wifi credentials @@ -132,7 +156,7 @@ void setup() { #ifdef SENSOR_BMP180 - Serial.println("initializing bmp180"); + Serial.println("initializing bmp180"); if (!bmp180.begin()){ Serial.println("#ERROR: BMP180 init fail\n\n"); } @@ -174,16 +198,29 @@ void setup() { #ifdef SENSOR_LDR Serial.println("initializing ldr"); - pinMode(LDR_PIN, INPUT); //ldr - #ifdef dataLDR_readdelay - dataLDR.readdelay=dataLDR_readdelay; - #endif - #ifdef dataLDR_senddelaymax - dataLDR.senddelaymax=dataLDR_senddelaymax; - #endif - #ifdef dataLDR_minchange - dataLDR.minchange=dataLDR_minchange; - #endif + pinMode(LDR_PIN, INPUT); //ldr + #ifdef dataLDR_readdelay + dataLDR.readdelay=dataLDR_readdelay; + #endif + #ifdef dataLDR_senddelaymax + dataLDR.senddelaymax=dataLDR_senddelaymax; + #endif + #ifdef dataLDR_minchange + dataLDR.minchange=dataLDR_minchange; + #endif + #endif + + #ifdef SENSOR_MHZ19 + Serial.println("initializing mhz19"); + #ifdef dataMHZ19_minchange + dataMHZ19.minchange=dataMHZ19_minchange; + #endif + #ifdef dataMHZ19_readdelay + dataMHZ19.readdelay=dataMHZ19_readdelay; + #endif + + mhz19_swSerial.begin(BAUD_RATE_MHZ19, SWSERIAL_8N1, MHZ19_SERIAL_RX, MHZ19_SERIAL_TX, false, 256); + mhz19.setSerial(&mhz19_swSerial); #endif @@ -221,6 +258,10 @@ void setup() { sensorNode.advertise("temperature"); sensorNode.advertise("pressure"); #endif + + #ifdef SENSOR_MHZ19 + sensorNode.advertise("co2"); + #endif Serial.println("connecting.."); @@ -442,6 +483,41 @@ void loop_PIR() } #endif +#ifdef SENSOR_MHZ19 +void loop_MHZ19() +{ + sensordata &d=dataMHZ19; + + bool _changed=false; + if (millis() >= (d.lastreadtime+d.readdelay)) { + mhz19_ready=mhz19.isReady(); + value_co2=mhz19.readValue(); //[ppm] + //Homie.getLogger() << "co2 " << ": " << value_co2 << " status=" << mhz19_ready << endl; + if (fabs(d.lastsentvalue-value_co2)>=d.minchange){ + _changed=true; + } + d.lastreadtime=millis(); + } + + if (_changed || millis() >= (d.lastsent+d.senddelaymax)) { + Serial.print("Sending MHZ19. reason="); + if (_changed) Serial.println("change"); else Serial.println("time"); + checkESPStatus(); + + Homie.getLogger() << "co2 " << ": " << value_co2 << endl; + if (mhz19_ready){ //send no co2 values if not warmed up. can take several miniutes + sensorNode.setProperty("co2").send(String(value_co2)); + }else{ + Homie.getLogger() << "co2 not ready. didnt sent" << endl; + } + + d.lastsentvalue=value_co2; + + d.lastsent=millis(); + } +} +#endif + @@ -470,6 +546,10 @@ void loopHandler() { loop_PIR(); #endif + #ifdef SENSOR_MHZ19 + loop_MHZ19(); + #endif + @@ -491,6 +571,7 @@ void checkESPStatus() // Calculate lux based on rawADC reading from LDR returns value in lux/10 ////////////////////////////////////////////////////////////////////////////// //quelle: https://groups.google.com/forum/#!topic/souliss/1kMAltPB2ME[1-25] +#ifdef SENSOR_LDR int get_lux(const unsigned int* _in, const unsigned int* _out, byte size) { @@ -520,4 +601,5 @@ int get_lux(const unsigned int* _in, const unsigned int* _out, byte size) // interpolate in the right segment for the rest return map(val, _in[pos-1], _in[pos], _out[pos-1], _out[pos]); -} \ No newline at end of file +} +#endif \ No newline at end of file