uc: Makefile clean-up, silence make output commands, include fuse programming, use system avrdude
This commit is contained in:
Bart Van Der Meerssche
parent
48860d6508
commit
933654eb9c
62
uc/Makefile
62
uc/Makefile
|
|
@ -38,11 +38,25 @@
|
|||
|
||||
###############################################################################
|
||||
#
|
||||
# project specific settings: WEE!
|
||||
# project specific settings:
|
||||
#
|
||||
TARGET = main
|
||||
ARDUINO_VERSION = 0011
|
||||
INSTALL_DIR = /home/icarus75/arduino/arduino-$(ARDUINO_VERSION)
|
||||
#
|
||||
# Predefine the TYPE and SENSORx C macros in main.h via this Makefile.
|
||||
# Override the defaults on the command line by typing:
|
||||
# make TYPE=xxxx SENSOR0=yyyy ...
|
||||
#
|
||||
DBG = 0
|
||||
#
|
||||
TYPE = 2300501
|
||||
METERCONST= 5508
|
||||
#
|
||||
SENSOR0 = 0123456789abcdef0123456789abcde0
|
||||
SENSOR1 = 0123456789abcdef0123456789abcde1
|
||||
SENSOR2 = 0123456789abcdef0123456789abcde2
|
||||
SENSOR3 = 0123456789abcdef0123456789abcde3
|
||||
#
|
||||
CEXTRA = -D DBG=$(DBG) -D TYPE=$(TYPE) -D METERCONST=$(METERCONST) -D 'SENSOR0="$(SENSOR0)"' -D 'SENSOR1="$(SENSOR1)"' -D 'SENSOR2="$(SENSOR2)"' -D 'SENSOR3="$(SENSOR3)"'
|
||||
###############################################################################
|
||||
|
||||
|
||||
|
|
@ -80,21 +94,6 @@ AVRDUDE_PROGRAMMER = usbtiny
|
|||
#
|
||||
MCU = atmega48
|
||||
F_CPU = 1000000
|
||||
#
|
||||
# Predefine the TYPE and SENSORx C macros in main.h via this Makefile.
|
||||
# Override the defaults on the command line by typing:
|
||||
# make TYPE=xxxx SENSOR0=yyyy ...
|
||||
#
|
||||
DBG = 0
|
||||
#
|
||||
TYPE = 2300501
|
||||
#
|
||||
SENSOR0 = 0123456789abcdef0123456789abcde0
|
||||
SENSOR1 = 0123456789abcdef0123456789abcde1
|
||||
SENSOR2 = 0123456789abcdef0123456789abcde2
|
||||
SENSOR3 = 0123456789abcdef0123456789abcde3
|
||||
#
|
||||
CEXTRA = -D DBG=$(DBG) -D TYPE=$(TYPE) -D 'SENSOR0="$(SENSOR0)"' -D 'SENSOR1="$(SENSOR1)"' -D 'SENSOR2="$(SENSOR2)"' -D 'SENSOR3="$(SENSOR3)"'
|
||||
#####################################################################################
|
||||
|
||||
#####################################################################################
|
||||
|
|
@ -140,6 +139,7 @@ LDFLAGS = -lm
|
|||
|
||||
# Programming support using avrdude. Settings and variables.
|
||||
AVRDUDE_PORT = $(PORT)
|
||||
AVRDUDE_WRITE_FUSES= -U lfuse:w:0x6E:m -U hfuse:w:0xD6:m -U efuse:w:0x1:m
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:bin/$(TARGET).hex
|
||||
AVRDUDE_WRITE_EEPROM = -U eeprom:w:bin/$(TARGET).eep
|
||||
AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER) -b $(UPLOAD_RATE)
|
||||
|
|
@ -152,7 +152,7 @@ OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump
|
|||
AR = $(AVR_TOOLS_PATH)/avr-ar
|
||||
SIZE = $(AVR_TOOLS_PATH)/avr-size
|
||||
NM = $(AVR_TOOLS_PATH)/avr-nm
|
||||
AVRDUDE = $(INSTALL_DIR)/hardware/tools/avrdude
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
MV = mv -f
|
||||
|
||||
|
|
@ -175,8 +175,8 @@ all: bin_files build sizeafter
|
|||
build: elf hex eep
|
||||
|
||||
bin_files: $(TARGET).c
|
||||
test -d bin || mkdir bin
|
||||
cp $(TARGET).c bin/$(TARGET).c
|
||||
@test -d bin || mkdir bin
|
||||
@cp $(TARGET).c bin/$(TARGET).c
|
||||
|
||||
elf: bin/$(TARGET).elf
|
||||
hex: bin/$(TARGET).hex
|
||||
|
|
@ -186,11 +186,9 @@ sym: bin/$(TARGET).sym
|
|||
|
||||
# Program the device.
|
||||
upload: bin/$(TARGET).hex
|
||||
sudo $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
# sudo $(AVRDUDE) -c usbtiny -p atmega168 -b $(UPLOAD_RATE) -U lock:w:0x0F:m
|
||||
@$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FUSES) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
|
||||
|
||||
# Display size of file.
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) bin/$(TARGET).hex
|
||||
ELFSIZE = $(SIZE) bin/$(TARGET).elf
|
||||
sizebefore:
|
||||
|
|
@ -218,10 +216,10 @@ extcoff: $(TARGET).elf
|
|||
.SUFFIXES: .elf .hex .eep .lss .sym
|
||||
|
||||
.elf.hex:
|
||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
||||
@$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
||||
|
||||
.elf.eep:
|
||||
$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
@$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
|
|
@ -234,20 +232,18 @@ extcoff: $(TARGET).elf
|
|||
|
||||
# Link: create ELF output file from library.
|
||||
bin/$(TARGET).elf: $(TARGET).c bin/core.a
|
||||
$(CC) $(ALL_CFLAGS) -o $@ bin/$(TARGET).c -L. bin/core.a $(LDFLAGS)
|
||||
@$(CC) $(ALL_CFLAGS) -o $@ bin/$(TARGET).c -L. bin/core.a $(LDFLAGS)
|
||||
|
||||
bin/core.a: $(OBJ)
|
||||
@for i in $(OBJ); do echo $(AR) rcs bin/core.a $$i; $(AR) rcs bin/core.a $$i; done
|
||||
|
||||
|
||||
@for i in $(OBJ); do $(AR) rcs bin/core.a $$i; done
|
||||
|
||||
# Compile: create object files from C++ source files.
|
||||
.cpp.o:
|
||||
$(CXX) -c $(ALL_CXXFLAGS) $< -o $@
|
||||
@$(CXX) -c $(ALL_CXXFLAGS) $< -o $@
|
||||
|
||||
# Compile: create object files from C source files.
|
||||
.c.o:
|
||||
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
||||
@$(CC) -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C source files.
|
||||
|
|
|
|||
Loading…
Reference in New Issue