diff --git a/mote/v2/avr/makefile b/mote/v2/avr/makefile
index a5efa8b..226b7da 100644
--- a/mote/v2/avr/makefile
+++ b/mote/v2/avr/makefile
@@ -72,11 +72,11 @@ FORMAT = ihex
 
 
 # Target file name (without extension).
-TARGET = main
+TARGET = $(shell git rev-parse HEAD | awk '{print substr($$0,1,16)}')
 
 
 # List C source files here. (C dependencies are automatically generated.)
-SRC = $(TARGET).c buffer.c uart.c spi.c ctrl.c
+SRC = main.c buffer.c uart.c spi.c ctrl.c
 
 
 # List Assembler source files here.
@@ -542,13 +542,13 @@ clean: begin clean_list end
 clean_list :
 	@echo
 	@echo $(MSG_CLEANING)
-	$(REMOVE) $(TARGET).hex
-	$(REMOVE) $(TARGET).eep
-	$(REMOVE) $(TARGET).cof
-	$(REMOVE) $(TARGET).elf
-	$(REMOVE) $(TARGET).map
-	$(REMOVE) $(TARGET).sym
-	$(REMOVE) $(TARGET).lss
+	$(REMOVE) *.hex
+	$(REMOVE) *.eep
+	$(REMOVE) *.cof
+	$(REMOVE) *.elf
+	$(REMOVE) *.map
+	$(REMOVE) *.sym
+	$(REMOVE) *.lss
 	$(REMOVE) $(OBJ)
 	$(REMOVE) $(LST)
 	$(REMOVE) $(SRC:.c=.s)
diff --git a/mote/v2/openwrt/package/flukso/Makefile b/mote/v2/openwrt/package/flukso/Makefile
index 66b1ee8..1bdc7da 100644
--- a/mote/v2/openwrt/package/flukso/Makefile
+++ b/mote/v2/openwrt/package/flukso/Makefile
@@ -29,6 +29,11 @@ define Build/Prepare
 	$(CP) ./luasrc/* $(PKG_BUILD_DIR)/
 	$(CP) ./config/* $(PKG_BUILD_DIR)/
 	$(CP) -r ./files $(PKG_BUILD_DIR)/
+
+	make -C ../../../avr clean
+	make -C ../../../avr
+	mkdir -p $(PKG_BUILD_DIR)/avr
+	$(CP) ../../../avr/*.{hex,eep} $(PKG_BUILD_DIR)/avr/
 endef
 
 FLUKSO_COMMIT:=$(shell git rev-parse HEAD | awk '{print substr($$0,1,16)}')
@@ -65,6 +70,9 @@ define Package/flukso/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdude.lua $(1)/usr/bin/fdude
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fcheck.sh $(1)/usr/bin/fcheck
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/restful.lua $(1)/usr/bin/restful
+
+	$(INSTALL_DIR) $(1)/usr/bin/avr
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/avr/*.{hex,eep} $(1)/usr/bin/avr/
 endef
 
 $(eval $(call BuildPackage,flukso))
diff --git a/mote/v2/openwrt/package/flukso/config/flukso.init b/mote/v2/openwrt/package/flukso/config/flukso.init
index fadc152..d0ffdc6 100755
--- a/mote/v2/openwrt/package/flukso/config/flukso.init
+++ b/mote/v2/openwrt/package/flukso/config/flukso.init
@@ -21,6 +21,24 @@ load_config()
         logger 'configuring flukso device and sensor ids'
 }
 
+program_sensor_board()
+{
+	AVRDUDE=fdude
+
+	MCU=atmega168p
+	PROGRAMMER=gpio
+	FLAGS="-p $MCU -c $PROGRAMMER"
+	FUSES="-U lfuse:w:0xEC:m -U hfuse:w:0xD6:m -U efuse:w:0x01:m"
+
+	AVRDIR=/usr/bin/avr
+	HEXFILE=$(find $AVRDIR/*.hex)
+	EEPFILE=$(find $AVRDIR/*.eep)
+
+	FLASH="-U flash:w:$HEXFILE"
+	EEPROM="-U eeprom:w:$EEPFILE"
+
+	$AVRDUDE $FLAGS $FUSES $FLASH $EEPROM
+}
 
 start()
 {
@@ -29,6 +47,7 @@ start()
 	if [ $FIRSTBOOT -eq '1' ]
 	then
 		load_config
+		program_sensor_board
 	fi
 
 	chmod 666 /dev/spidev0.0