diff -urNad /tmp/avrdude-5.10/config_gram.y avrdude-5.10/config_gram.y
--- /tmp/avrdude-5.10/config_gram.y 2010-08-06 20:32:45.039034875 +0200
+++ avrdude-5.10/config_gram.y 2010-08-06 20:30:54.071034545 +0200
@@ -386,179 +386,12 @@
}
} |
- K_TYPE TKN_EQUAL K_PAR {
- {
- par_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_SERBB {
- {
- serbb_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_STK500 {
- {
- stk500_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_STK500V2 {
- {
- stk500v2_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_STK500HVSP {
- {
- stk500hvsp_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_STK500PP {
- {
- stk500pp_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_STK500GENERIC {
- {
- stk500generic_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_ARDUINO {
- {
- arduino_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_BUSPIRATE {
- {
- buspirate_initpgm(current_prog);
- }
- } |
-
K_TYPE TKN_EQUAL K_GPIO {
{
gpio_initpgm(current_prog);
}
} |
- K_TYPE TKN_EQUAL K_STK600 {
- {
- stk600_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_STK600HVSP {
- {
- stk600hvsp_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_STK600PP {
- {
- stk600pp_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_AVR910 {
- {
- avr910_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_USBASP {
- {
- usbasp_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_USBTINY {
- {
- usbtiny_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_BUTTERFLY {
- {
- butterfly_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_JTAG_MKI {
- {
- jtagmkI_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_JTAG_MKII {
- {
- jtagmkII_initpgm(current_prog);
- }
- } |
- K_TYPE TKN_EQUAL K_JTAG_MKII_AVR32 {
- {
- jtagmkII_avr32_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_JTAG_MKII_DW {
- {
- jtagmkII_dw_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_JTAG_MKII_ISP {
- {
- stk500v2_jtagmkII_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_JTAG_MKII_PDI {
- {
- jtagmkII_pdi_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_DRAGON_DW {
- {
- jtagmkII_dragon_dw_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_DRAGON_HVSP {
- {
- stk500v2_dragon_hvsp_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_DRAGON_ISP {
- {
- stk500v2_dragon_isp_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_DRAGON_JTAG {
- {
- jtagmkII_dragon_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_DRAGON_PDI {
- {
- jtagmkII_dragon_pdi_initpgm(current_prog);
- }
- } |
-
- K_TYPE TKN_EQUAL K_DRAGON_PP {
- {
- stk500v2_dragon_pp_initpgm(current_prog);
- }
- } |
-
K_DESC TKN_EQUAL TKN_STRING {
strncpy(current_prog->desc, $3->value.string, PGM_DESCLEN);
current_prog->desc[PGM_DESCLEN-1] = 0;
diff -urNad /tmp/avrdude-5.10/avrdude.conf.in avrdude-5.10/avrdude.conf.in
--- /tmp/avrdude-5.10/avrdude.conf.in 2010-08-06 20:28:58.959965749 +0200
+++ avrdude-5.10/avrdude.conf.in 2010-08-06 20:44:19.466964893 +0200
@@ -315,525 +315,6 @@
#
programmer
- id = "arduino";
- desc = "Arduino";
- type = arduino;
-;
-
-programmer
- id = "avrisp";
- desc = "Atmel AVR ISP";
- type = stk500;
-;
-
-programmer
- id = "avrispv2";
- desc = "Atmel AVR ISP V2";
- type = stk500v2;
-;
-
-programmer
- id = "avrispmkII";
- desc = "Atmel AVR ISP mkII";
- type = stk500v2;
-;
-
-programmer
- id = "avrisp2";
- desc = "Atmel AVR ISP mkII";
- type = stk500v2;
-;
-
-programmer
- id = "buspirate";
- desc = "The Bus Pirate";
- type = buspirate;
-;
-
-# This is supposed to be the "default" STK500 entry.
-# Attempts to select the correct firmware version
-# by probing for it. Better use one of the entries
-# below instead.
-programmer
- id = "stk500";
- desc = "Atmel STK500";
- type = stk500generic;
-;
-
-programmer
- id = "stk500v1";
- desc = "Atmel STK500 Version 1.x firmware";
- type = stk500;
-;
-
-programmer
- id = "mib510";
- desc = "Crossbow MIB510 programming board";
- type = stk500;
-;
-
-programmer
- id = "stk500v2";
- desc = "Atmel STK500 Version 2.x firmware";
- type = stk500v2;
-;
-
-programmer
- id = "stk500pp";
- desc = "Atmel STK500 V2 in parallel programming mode";
- type = stk500pp;
-;
-
-programmer
- id = "stk500hvsp";
- desc = "Atmel STK500 V2 in high-voltage serial programming mode";
- type = stk500hvsp;
-;
-
-programmer
- id = "stk600";
- desc = "Atmel STK600";
- type = stk600;
-;
-
-programmer
- id = "stk600pp";
- desc = "Atmel STK600 in parallel programming mode";
- type = stk600pp;
-;
-
-programmer
- id = "stk600hvsp";
- desc = "Atmel STK600 in high-voltage serial programming mode";
- type = stk600hvsp;
-;
-
-programmer
- id = "avr910";
- desc = "Atmel Low Cost Serial Programmer";
- type = avr910;
-;
-
-programmer
- id = "usbasp";
- desc = "USBasp, http://www.fischl.de/usbasp/";
- type = usbasp;
-;
-
-programmer
- id = "usbtiny";
- desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
- type = usbtiny;
-;
-
-programmer
- id = "butterfly";
- desc = "Atmel Butterfly Development Board";
- type = butterfly;
-;
-
-programmer
- id = "avr109";
- desc = "Atmel AppNote AVR109 Boot Loader";
- type = butterfly;
-;
-
-programmer
- id = "avr911";
- desc = "Atmel AppNote AVR911 AVROSP";
- type = butterfly;
-;
-
-programmer
- id = "jtagmkI";
- desc = "Atmel JTAG ICE (mkI)";
- baudrate = 115200; # default is 115200
- type = jtagmki;
-;
-
-# easier to type
-programmer
- id = "jtag1";
- desc = "Atmel JTAG ICE (mkI)";
- baudrate = 115200; # default is 115200
- type = jtagmki;
-;
-
-# easier to type
-programmer
- id = "jtag1slow";
- desc = "Atmel JTAG ICE (mkI)";
- baudrate = 19200;
- type = jtagmki;
-;
-
-programmer
- id = "jtagmkII";
- desc = "Atmel JTAG ICE mkII";
- baudrate = 19200; # default is 19200
- type = jtagmkii;
-;
-
-# easier to type
-programmer
- id = "jtag2slow";
- desc = "Atmel JTAG ICE mkII";
- baudrate = 19200; # default is 19200
- type = jtagmkii;
-;
-
-# JTAG ICE mkII @ 115200 Bd
-programmer
- id = "jtag2fast";
- desc = "Atmel JTAG ICE mkII";
- baudrate = 115200;
- type = jtagmkii;
-;
-
-# make the fast one the default, people will love that
-programmer
- id = "jtag2";
- desc = "Atmel JTAG ICE mkII";
- baudrate = 115200;
- type = jtagmkii;
-;
-
-# JTAG ICE mkII in ISP mode
-programmer
- id = "jtag2isp";
- desc = "Atmel JTAG ICE mkII in ISP mode";
- baudrate = 115200;
- type = jtagmkii_isp;
-;
-
-# JTAG ICE mkII in debugWire mode
-programmer
- id = "jtag2dw";
- desc = "Atmel JTAG ICE mkII in debugWire mode";
- baudrate = 115200;
- type = jtagmkii_dw;
-;
-
-# JTAG ICE mkII in AVR32 mode
-programmer
- id = "jtagmkII_avr32";
- desc = "Atmel JTAG ICE mkII im AVR32 mode";
- baudrate = 115200;
- type = jtagmkii_avr32;
-;
-
-# JTAG ICE mkII in AVR32 mode
-programmer
- id = "jtag2avr32";
- desc = "Atmel JTAG ICE mkII im AVR32 mode";
- baudrate = 115200;
- type = jtagmkii_avr32;
-;
-
-# JTAG ICE mkII in PDI mode
-programmer
- id = "jtag2pdi";
- desc = "Atmel JTAG ICE mkII PDI mode";
- baudrate = 115200;
- type = jtagmkii_pdi;
-;
-
-# AVR Dragon in JTAG mode
-programmer
- id = "dragon_jtag";
- desc = "Atmel AVR Dragon in JTAG mode";
- baudrate = 115200;
- type = dragon_jtag;
-;
-
-# AVR Dragon in ISP mode
-programmer
- id = "dragon_isp";
- desc = "Atmel AVR Dragon in ISP mode";
- baudrate = 115200;
- type = dragon_isp;
-;
-
-# AVR Dragon in PP mode
-programmer
- id = "dragon_pp";
- desc = "Atmel AVR Dragon in PP mode";
- baudrate = 115200;
- type = dragon_pp;
-;
-
-# AVR Dragon in HVSP mode
-programmer
- id = "dragon_hvsp";
- desc = "Atmel AVR Dragon in HVSP mode";
- baudrate = 115200;
- type = dragon_hvsp;
-;
-
-# AVR Dragon in debugWire mode
-programmer
- id = "dragon_dw";
- desc = "Atmel AVR Dragon in debugWire mode";
- baudrate = 115200;
- type = dragon_dw;
-;
-
-# AVR Dragon in PDI mode
-programmer
- id = "dragon_pdi";
- desc = "Atmel AVR Dragon in PDI mode";
- baudrate = 115200;
- type = dragon_pdi;
-;
-
-programmer
- id = "pavr";
- desc = "Jason Kyle's pAVR Serial Programmer";
- type = avr910;
-;
-
-@HAVE_PARPORT_BEGIN@ Inclusion of the following depends on --enable-parport
-# Parallel port programmers.
-
-programmer
- id = "bsd";
- desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
- type = par;
- vcc = 2, 3, 4, 5;
- reset = 7;
- sck = 8;
- mosi = 9;
- miso = 10;
-;
-
-programmer
- id = "stk200";
- desc = "STK200";
- type = par;
- buff = 4, 5;
- sck = 6;
- mosi = 7;
- reset = 9;
- miso = 10;
-;
-
-# The programming dongle used by the popular Ponyprog
-# utility. It is almost similar to the STK200 one,
-# except that there is a LED indicating that the
-# programming is currently in progress.
-
-programmer
- id = "pony-stk200";
- desc = "Pony Prog STK200";
- type = par;
- buff = 4, 5;
- sck = 6;
- mosi = 7;
- reset = 9;
- miso = 10;
- pgmled = 8;
-;
-
-programmer
- id = "dt006";
- desc = "Dontronics DT006";
- type = par;
- reset = 4;
- sck = 5;
- mosi = 2;
- miso = 11;
-;
-
-programmer
- id = "bascom";
- desc = "Bascom SAMPLE programming cable";
- type = par;
- reset = 4;
- sck = 5;
- mosi = 2;
- miso = 11;
-;
-
-programmer
- id = "alf";
- desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
- type = par;
- vcc = 2, 3, 4, 5;
- buff = 6;
- reset = 7;
- sck = 8;
- mosi = 9;
- miso = 10;
- errled = 1;
- rdyled = 14;
- pgmled = 16;
- vfyled = 17;
-;
-
-programmer
- id = "sp12";
- desc = "Steve Bolt's Programmer";
- type = par;
- vcc = 4,5,6,7,8;
- reset = 3;
- sck = 2;
- mosi = 9;
- miso = 11;
-;
-
-programmer
- id = "picoweb";
- desc = "Picoweb Programming Cable, http://www.picoweb.net/";
- type = par;
- reset = 2;
- sck = 3;
- mosi = 4;
- miso = 13;
-;
-
-programmer
- id = "abcmini";
- desc = "ABCmini Board, aka Dick Smith HOTCHIP";
- type = par;
- reset = 4;
- sck = 3;
- mosi = 2;
- miso = 10;
-;
-
-programmer
- id = "futurlec";
- desc = "Futurlec.com programming cable.";
- type = par;
- reset = 3;
- sck = 2;
- mosi = 1;
- miso = 10;
-;
-
-
-# From the contributor of the "xil" jtag cable:
-# The "vcc" definition isn't really vcc (the cable gets its power from
-# the programming circuit) but is necessary to switch one of the
-# buffer lines (trying to add it to the "buff" lines doesn't work).
-# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK
-# to SCK (plus vcc/gnd of course)
-programmer
- id = "xil";
- desc = "Xilinx JTAG cable";
- type = par;
- mosi = 2;
- sck = 3;
- reset = 4;
- buff = 5;
- miso = 13;
- vcc = 6;
-;
-
-
-programmer
- id = "dapa";
- desc = "Direct AVR Parallel Access cable";
- type = par;
- vcc = 3;
- reset = 16;
- sck = 1;
- mosi = 2;
- miso = 11;
-;
-
-programmer
- id = "atisp";
- desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th";
- type = par;
- reset = ~6;
- sck = ~8;
- mosi = ~7;
- miso = ~10;
-;
-
-programmer
- id = "ere-isp-avr";
- desc = "ERE ISP-AVR ";
- type = par;
- reset = ~4;
- sck = 3;
- mosi = 2;
- miso = 10;
-;
-
-programmer
- id = "blaster";
- desc = "Altera ByteBlaster";
- type = par;
- sck = 2;
- miso = 11;
- reset = 3;
- mosi = 8;
- buff = 14;
-;
-
-# It is almost same as pony-stk200, except vcc on pin 5 to auto
-# disconnect port (download on http://electropol.free.fr)
-programmer
- id = "frank-stk200";
- desc = "Frank STK200";
- type = par;
- vcc = 5;
- sck = 6;
- mosi = 7;
- reset = 9;
- miso = 10;
- pgmled = 8;
-;
-
-# The AT98ISP Cable is a simple parallel dongle for AT89 family.
-# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
-programmer
-id = "89isp";
-desc = "Atmel at89isp cable";
-type = par;
-reset = 17;
-sck = 1;
-mosi = 2;
-miso = 10;
-;
-
-@HAVE_PARPORT_END@
-
-#
-# some ultra cheap programmers use bitbanging on the
-# serialport.
-#
-# PC - DB9 - Pins for RS232:
-#
-# GND 5 -- |O
-# | O| <- 9 RI
-# DTR 4 <- |O |
-# | O| <- 8 CTS
-# TXD 3 <- |O |
-# | O| -> 7 RTS
-# RXD 2 -> |O |
-# | O| <- 6 DSR
-# DCD 1 -> |O
-#
-# Using RXD is currently not supported.
-# Using RI is not supported under Win32 but is supported under Posix.
-
-# serial ponyprog design (dasa2 in uisp)
-# reset=!txd sck=rts mosi=dtr miso=cts
-
-programmer
- id = "ponyser";
- desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts";
- type = serbb;
- reset = ~3;
- sck = 7;
- mosi = 4;
- miso = 8;
-;
-
-programmer
id = "gpio";
desc = "Use gpio_dev to bitbang GPIO lines";
type = gpio;
@@ -843,58 +324,6 @@
miso = 1;
;
-# Same as above, different name
-# reset=!txd sck=rts mosi=dtr miso=cts
-
-programmer
- id = "siprog";
- desc = "Lancos SI-Prog ";
- type = serbb;
- reset = ~3;
- sck = 7;
- mosi = 4;
- miso = 8;
-;
-
-# unknown (dasa in uisp)
-# reset=rts sck=dtr mosi=txd miso=cts
-
-programmer
- id = "dasa";
- desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts";
- type = serbb;
- reset = 7;
- sck = 4;
- mosi = 3;
- miso = 8;
-;
-
-# unknown (dasa3 in uisp)
-# reset=!dtr sck=rts mosi=txd miso=cts
-
-programmer
- id = "dasa3";
- desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts";
- type = serbb;
- reset = ~4;
- sck = 7;
- mosi = 3;
- miso = 8;
-;
-
-# C2N232i (jumper configuration "auto")
-# reset=dtr sck=!rts mosi=!txd miso=!cts
-
-programmer
- id = "c2n232i";
- desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts";
- type = serbb;
- reset = 4;
- sck = ~7;
- mosi = ~3;
- miso = ~8;
-;
-
#
# PART DEFINITIONS
#