339 lines
9.1 KiB
C++
339 lines
9.1 KiB
C++
/*
|
|
* TODO:
|
|
* bestehende steuerung aus espcontroller übernehmen und testen
|
|
* topics und handler implementieren
|
|
*/
|
|
|
|
#include "Ethernet.h"
|
|
#include "PubSubClient.h"
|
|
|
|
//Ethernet and MQTT
|
|
String ip = "";
|
|
uint8_t mac[6] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x06};
|
|
|
|
#define CLIENT_ID "Mixer"
|
|
EthernetClient ethClient;
|
|
PubSubClient mqttClient;
|
|
|
|
#define PUBLISH_DELAY 10000
|
|
long last_send=0;
|
|
|
|
|
|
|
|
//Serial
|
|
long last_serialdebug=0;
|
|
#define INTERVAL_SERIALDEBUG 200
|
|
|
|
//Inputs
|
|
#define PIN_BUTTON 9 //D9 = PB1
|
|
#define PIN_ENCA 7 //D7 = PD7
|
|
#define PIN_ENCB 8 //D8 = PB0
|
|
#define BUTTON_RELEASE_DEBOUNCE 100 //minimum time after button release to reenable triggering
|
|
|
|
boolean button_flag=false; //true if button pressed
|
|
boolean button_released=true;
|
|
long last_button_released=0; //last time button has been released (for debounce)
|
|
|
|
//Shift Register 595
|
|
//connections: https://www.arduino.cc/en/tutorial/ShiftOut
|
|
#define SRLATCH 4 //D4 = PD4
|
|
#define SRCLOCK 5 //D5 = PD5
|
|
#define SRDATA 6 //D6 = PD6
|
|
uint16_t srbits=0;
|
|
|
|
#include <Encoder.h>
|
|
Encoder volEnc(PIN_ENCA,PIN_ENCB);
|
|
float encoderMultiplier=4.0;
|
|
|
|
//Servo stuff
|
|
#define SRPIN_MOTOR_IN1 1 //L293(pin2) Motor IN1
|
|
#define SRPIN_MOTOR_IN2 2 //L293(pin7) Motor IN2
|
|
|
|
#define PIN_POT A0 //A0 = PC0, reference potentiometer wiper
|
|
#define DEADZONE_POTI 5 //maximum allowed error. stop when reached this zone
|
|
#define POT_MIN 10 //minimum value pot can reach
|
|
#define POT_MAX 1010 //maximum value pot can reach
|
|
#define POTIFILTER 0.8 //0 to 1. 1 means old value stays forever
|
|
|
|
int poti_set=512; //set value
|
|
int poti_read=0; //read value from poti
|
|
boolean poti_reachedposition=true; //set to true if position reached. after that stop turning
|
|
|
|
#define MOTOR_STOP(); srWrite(SRPIN_MOTOR_IN1,LOW); srWrite(SRPIN_MOTOR_IN2,LOW);
|
|
#define MOTOR_LEFT(); srWrite(SRPIN_MOTOR_IN1,LOW); srWrite(SRPIN_MOTOR_IN2,HIGH);
|
|
#define MOTOR_RIGHT(); srWrite(SRPIN_MOTOR_IN1,HIGH); srWrite(SRPIN_MOTOR_IN2,LOW);
|
|
#define MOTOR_TURNING() (srRead(SRPIN_MOTOR_IN1) != srRead(SRPIN_MOTOR_IN2))
|
|
|
|
|
|
//Motorcheck
|
|
long last_motorcheck=0;
|
|
#define INTERVAL_MOTORCHECK 100 //check motor movement every x ms
|
|
int poti_read_last=0;
|
|
int motor_vel=0; //analog read units per second
|
|
#define MINIMUM_MOTORVEL 20 //minimum velocity motor should turn wenn active
|
|
#define MOTOR_FAILTIME 500 //in ms. if motor did not turn fox x amount of time at least with MINIMUM_MOTORVEL an error will initiate
|
|
long last_motorTooSlow=0; //typically 0
|
|
|
|
//error
|
|
uint8_t error=0;
|
|
#define NOERROR 0
|
|
#define MOTORDIDNOTTURN 1
|
|
|
|
void setup() {
|
|
pinMode(PIN_BUTTON,INPUT_PULLUP);
|
|
|
|
pinMode(PIN_POT,INPUT);
|
|
|
|
pinMode(SRLATCH, OUTPUT);
|
|
pinMode(SRCLOCK, OUTPUT);
|
|
pinMode(SRDATA, OUTPUT);
|
|
|
|
Serial.begin(9600);
|
|
while (!Serial) {};
|
|
Serial.println("Booting");
|
|
|
|
|
|
if (Ethernet.begin(mac) == 0) { // setup ethernet communication using DHCP
|
|
Serial.println("Unable to configure Ethernet using DHCP");
|
|
Serial.flush();
|
|
delay(200);
|
|
for (;;);
|
|
}
|
|
|
|
Serial.println("Ethernet configured via DHCP");
|
|
Serial.print("IP address: ");
|
|
Serial.println(Ethernet.localIP());
|
|
Serial.println();
|
|
|
|
ip = String (Ethernet.localIP()[0]);
|
|
ip = ip + ".";
|
|
ip = ip + String (Ethernet.localIP()[1]);
|
|
ip = ip + ".";
|
|
ip = ip + String (Ethernet.localIP()[2]);
|
|
ip = ip + ".";
|
|
ip = ip + String (Ethernet.localIP()[3]);
|
|
//Serial.println(ip);
|
|
|
|
// setup mqtt client
|
|
mqttClient.setClient(ethClient);
|
|
mqttClient.setServer("10.0.0.1", 1883);
|
|
Serial.println("MQTT client configured");
|
|
mqttClient.setCallback(callback);
|
|
|
|
|
|
Serial.println("Ready");
|
|
last_send = millis();
|
|
|
|
|
|
|
|
}
|
|
|
|
void reconnect() {
|
|
// Loop until reconnected
|
|
while (!mqttClient.connected()) {
|
|
Serial.print("Attempting MQTT connection...");
|
|
// Attempt to connect
|
|
if (mqttClient.connect(CLIENT_ID)) {
|
|
Serial.println("connected");
|
|
mqttClient.publish("audiomixer/ip", ip.c_str()); //Publish own ip
|
|
mqttClient.subscribe("audiomixer/main/volume/set"); //subscribe to /set, republish without /set
|
|
} else {
|
|
Serial.print("failed, rc=");
|
|
Serial.print(mqttClient.state());
|
|
Serial.println(" try again in 5 seconds");
|
|
delay(5000);// Wait 5 seconds before retrying
|
|
}
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
long loopmillis=millis();
|
|
if (!mqttClient.connected()) {
|
|
reconnect();
|
|
}
|
|
mqttClient.loop();
|
|
|
|
|
|
|
|
//Serial Input ##############################################
|
|
while (Serial.available() > 0) {
|
|
int _value = Serial.parseInt();
|
|
if (Serial.read() == '\n') {
|
|
Serial.print("value=");
|
|
Serial.println(_value);
|
|
//poti_set=_value;
|
|
//poti_reachedposition=false; //aim for new position
|
|
srWrite(_value,!srRead(_value));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
//Inputs ###################################################
|
|
poti_read=poti_read*POTIFILTER + (1.0-POTIFILTER)*analogRead(PIN_POT); //read poti
|
|
|
|
if (!digitalRead(PIN_BUTTON)){ //button pressed
|
|
if (button_released){
|
|
button_released=false; //flag: not released
|
|
if(loopmillis-last_button_released > BUTTON_RELEASE_DEBOUNCE){
|
|
button_flag=true;
|
|
}
|
|
}
|
|
}else if(!button_flag && !button_released){ //button released and flag has been cleared
|
|
last_button_released=loopmillis;
|
|
button_released=true;
|
|
}
|
|
|
|
//Read Encoder to velocity "volEncVel"
|
|
int volEncVel=0;
|
|
int _volEnc=volEnc.read();
|
|
if (_volEnc!=0){ //encoder moved
|
|
volEncVel=_volEnc;
|
|
volEnc.write(0); //reset value
|
|
}
|
|
|
|
|
|
//Input Handling
|
|
if (volEncVel!=0){ //knob moved
|
|
poti_set+=volEncVel*encoderMultiplier; //change poti set value
|
|
poti_set=constrain(poti_set, POT_MIN,POT_MAX);
|
|
poti_reachedposition=false;
|
|
}
|
|
|
|
|
|
//Motor Movement Routine #################
|
|
if (error==0){ //no errors
|
|
|
|
if (!poti_reachedposition && abs(poti_read-poti_set)>DEADZONE_POTI){ //error too high
|
|
|
|
if (poti_read-poti_set < 0){
|
|
MOTOR_LEFT();
|
|
}else{
|
|
MOTOR_RIGHT();
|
|
}
|
|
}else if(!poti_reachedposition){ //position reached but flag not set
|
|
MOTOR_STOP();
|
|
Serial.print("reached:");
|
|
Serial.print(" set=");
|
|
Serial.print(poti_set);
|
|
Serial.print(" is=");
|
|
Serial.print(poti_read);
|
|
Serial.print(" vel=");
|
|
Serial.println();
|
|
poti_reachedposition=true; //position reached
|
|
}
|
|
|
|
|
|
if ( loopmillis > last_motorcheck+INTERVAL_MOTORCHECK){
|
|
last_motorcheck=loopmillis;
|
|
|
|
motor_vel=(poti_read-poti_read_last)*1000 /INTERVAL_MOTORCHECK ; //calculate current motor velocity
|
|
poti_read_last=poti_read;
|
|
|
|
//motor fail check
|
|
if (MOTOR_TURNING() && abs(motor_vel)<MINIMUM_MOTORVEL){ //motor is turning too slow
|
|
if (last_motorTooSlow==0){ //first time slow motor recognized
|
|
last_motorTooSlow=loopmillis;
|
|
}else if (loopmillis-last_motorTooSlow > MOTOR_FAILTIME){
|
|
error=MOTORDIDNOTTURN;
|
|
Serial.println("MOTORDIDNOTTURN");
|
|
}
|
|
|
|
}else if (last_motorTooSlow>0){ //was recognized too slow but is now turning fast again
|
|
last_motorTooSlow=0; //reset
|
|
}
|
|
|
|
}
|
|
}else{ //an error occured. error!=0
|
|
MOTOR_STOP();
|
|
}
|
|
|
|
|
|
|
|
if ( loopmillis > last_serialdebug+INTERVAL_SERIALDEBUG){
|
|
last_serialdebug=loopmillis;
|
|
|
|
|
|
Serial.print(" set=");
|
|
Serial.print(poti_set);
|
|
Serial.print(" is=");
|
|
Serial.print(poti_read);
|
|
Serial.print(" vel=");
|
|
Serial.print(motor_vel);
|
|
Serial.println("");
|
|
|
|
if (button_flag){ //TODO: remove hier if correct behaviour implemented
|
|
Serial.println("BUTTON Pressed");
|
|
button_flag=false; //clear flag to reenable button triggering.
|
|
}
|
|
|
|
}
|
|
|
|
|
|
}
|
|
|
|
void sendData() {
|
|
char msgBuffer[20];
|
|
float h = 50;
|
|
float testvalue = 42;
|
|
/*
|
|
Serial.print("testvalue: ");
|
|
Serial.print(testvalue);
|
|
Serial.println();
|
|
|
|
if (mqttClient.connect(CLIENT_ID)) {
|
|
mqttClient.publish("audiomixer/messwert/parameter", dtostrf(testvalue, 6, 2, msgBuffer));
|
|
//mqttClient.publish(DEVICENAME+"/br/nb/deur", (statusBD == HIGH) ? "OPEN" : "CLOSED");
|
|
}*/
|
|
}
|
|
|
|
void callback(char* topic, byte* payload, unsigned int length) {
|
|
payload[length] = '\0'; //add end of string character
|
|
Serial.print("Message arrived [");
|
|
Serial.print(topic);
|
|
Serial.print("] ");//MQTT_BROKER
|
|
for (int i = 0; i < length; i++) {
|
|
Serial.print((char)payload[i]);
|
|
}
|
|
Serial.println();
|
|
|
|
|
|
|
|
//if (strncmp((const char*)payload, "ON", 2) == 0) {
|
|
//}
|
|
|
|
if (strncmp((const char*)topic, "audiomixer/main/volume/set",sizeof(topic)) == 0) {
|
|
//Serial.println("republish");
|
|
|
|
String s = String((char*)payload);
|
|
Serial.print("Stringreceived=");
|
|
Serial.println(s);
|
|
float _floatvalue = s.toFloat();
|
|
Serial.print("setvalue=");
|
|
Serial.println(_floatvalue);
|
|
|
|
poti_set=constrain(map(_floatvalue,0.0,100.0,POT_MIN,POT_MAX),POT_MIN,POT_MAX); //set new poti position
|
|
poti_reachedposition=false; //aim for new position
|
|
mqttClient.publish("audiomixer/main/volume", payload, length );
|
|
}
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
void srWrite(uint8_t pin, boolean state){
|
|
if (state==true){
|
|
srbits |= 1UL << pin; //set bit
|
|
}else{
|
|
srbits &= ~(1UL << pin); //clear bit
|
|
}
|
|
digitalWrite(SRLATCH, LOW);
|
|
shiftOut(SRDATA, SRCLOCK, MSBFIRST, srbits>>8);
|
|
shiftOut(SRDATA, SRCLOCK, MSBFIRST, srbits);
|
|
digitalWrite(SRLATCH, HIGH);
|
|
}
|
|
boolean srRead(uint8_t pin){
|
|
return (srbits >> pin) & 1U;
|
|
}
|