refactor temperature sensor variable

controller_teensy/include/display.h

@@ -18,6 +18,7 @@ Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
 uint8_t standingDisplayScreen=0;
 #define NUM_STANDINGDISPLAYSCREEN 3
 
+#define DISPLAYSTANDSTILLTIME 5000
 
 bool display_init();
 void display_update(ESCSerialComm& escFront, ESCSerialComm& escRear);
@@ -86,7 +87,7 @@ void display_update(ESCSerialComm& escFront, ESCSerialComm& escRear){
     //Normal Display Routines here
     
     if (armed) {
-      if (loopmillis-last_notidle>5000) {
+      if (loopmillis-last_notidle>DISPLAYSTANDSTILLTIME) {
         display_standingDisplay(escFront,escRear);
       }else{
         display_drivingDisplay(escFront,escRear);
@@ -256,8 +257,8 @@ void display_standingDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear) {
   //Row 2
   //display.print(F("Temp:")); display.print(escFront.getFeedback_boardTemp());
   //display.print(F("/")); display.print(escRear.getFeedback_boardTemp());
-  display.print(F("T:")); display.print(temp_ESCFront,0);
+  display.print(F("T:")); display.print(temp_Front,0);
-  display.print(F("/")); display.print(temp_ESCRear,0);
+  display.print(F("/")); display.print(temp_Rear,0);
   display.print(F("/")); display.print(temp_Air,0);
   display.print(" C");
   display.println();

controller_teensy/include/logging.h

@@ -13,7 +13,10 @@ String datalogging_filename="UNKNOWN.txt";
 
 uint16_t chunksize=128; //for bulk data transmission
 
-#define LOGGINGINTERVAL 100
+#define LOGGINGINTERVAL 100 //logging interval when driving
+#define LOGGINGSTANDSTILLTIME 30000 //after which time of standstill logging interval should change
+#define LOGGINGINTERVALSTANDSTILL 500 //logging interval when standing still
+#define LOGGINGINTERVALDISARMED 1000 //logging interval when disarmed
 
 bool serialCommandEcho_Enabled=true;
 
@@ -81,7 +84,17 @@ void loggingLoop(unsigned long loopmillis,ESCSerialComm& escFront, ESCSerialComm
   static unsigned long last_datalogging_write=0;
   static boolean logging_headerWritten=false;
 
-  if (loopmillis-last_datalogging_write>LOGGINGINTERVAL)
+  unsigned long logginginterval=LOGGINGINTERVAL;
+  if (armed) { //Change Logginginterval when less is happening
+    if (loopmillis-last_notidle>LOGGINGSTANDSTILLTIME) {
+      logginginterval=LOGGINGINTERVALSTANDSTILL;
+    }
+  }else{ //disamred
+    logginginterval=LOGGINGINTERVALDISARMED;
+  }
+
+  
+  if (loopmillis-last_datalogging_write>logginginterval)
   {
     last_datalogging_write=loopmillis;
 
@@ -128,8 +141,8 @@ void loggingLoop(unsigned long loopmillis,ESCSerialComm& escFront, ESCSerialComm
         dataFile.print(escRear.getCurrentConsumed(),3); dataFile.print(",");
         dataFile.print(currentConsumed,3); dataFile.print(",");
         dataFile.print(watthoursConsumed,3); dataFile.print(",");
-        dataFile.print(temp_ESCFront,2); dataFile.print(",");
+        dataFile.print(temp_Front,2); dataFile.print(",");
-        dataFile.print(temp_ESCRear,2); dataFile.print(",");
+        dataFile.print(temp_Rear,2); dataFile.print(",");
         dataFile.print(temp_Air,2); dataFile.print(",");
         dataFile.print(looptime_duration_min); dataFile.print(",");
         dataFile.print(looptime_duration_max); //dataFile.print(",");
@@ -375,8 +388,8 @@ void serialCommandLoop(unsigned long loopmillis,ESCSerialComm& escFront, ESCSeri
         Serial.print("currentConsumed_Rear\t"); Serial.println(escRear.getCurrentConsumed(),3);
         Serial.print("currentConsumed\t"); Serial.println(currentConsumed,3);
         Serial.print("watthoursConsumed\t"); Serial.println(watthoursConsumed,3);
-        Serial.print("temp_Front\t"); Serial.println(temp_ESCFront,3);
+        Serial.print("temp_Front\t"); Serial.println(temp_Front,3);
-        Serial.print("temp_Rear\t"); Serial.println(temp_ESCRear,3);
+        Serial.print("temp_Rear\t"); Serial.println(temp_Rear,3);
         Serial.print("temp_Air\t"); Serial.println(temp_Air,3);
         Serial.print("looptime_duration_min\t"); Serial.println(looptime_duration_min);
         Serial.print("looptime_duration_max\t"); Serial.println(looptime_duration_max);

controller_teensy/include/temperature.h

@@ -7,10 +7,10 @@
 //#define SEARCH_DEVICES
 
 
-DeviceAddress thermometerESCFront={0x28,0xFF,0x64,0x0E,0x77,0xB0,0xAB,0x4B}; //IC with one marking  28FF640E77B0AB4B
+DeviceAddress thermometerFront={0x28,0xFF,0x64,0x0E,0x77,0xB0,0xAB,0x4B}; //IC with one marking  28FF640E77B0AB4B
-float temp_ESCFront;
+float temp_Front;
-DeviceAddress thermometerESCRear={0x28,0xFF,0x64,0x0E,0x76,0x5D,0x86,0xC2}; //IC with two markings  
+DeviceAddress thermometerRear={0x28,0xFF,0x64,0x0E,0x76,0x5D,0x86,0xC2}; //IC with two markings  
-float temp_ESCRear;
+float temp_Rear;
 DeviceAddress thermometerAir={0x28,0xFF,0x64,0x0E,0x74,0x7E,0xFE,0x23}; //IC with three markings 28FF640E747EFE23
 float temp_Air;
 
@@ -84,8 +84,8 @@ bool temperatureLoop(unsigned long loopmillis) {
         if (sensors.isConversionComplete()) {
             flag_requestTemperatures=false;
             last_read_ds18b20=loopmillis;
-            temp_ESCFront= sensors.getTempC(thermometerESCFront); //This takes ~12.5ms
+            temp_Front= sensors.getTempC(thermometerFront); //This takes ~12.5ms
-            temp_ESCRear= sensors.getTempC(thermometerESCRear);
+            temp_Rear= sensors.getTempC(thermometerRear);
             temp_Air= sensors.getTempC(thermometerAir);            
         }
     }

controller_teensy/src/main.cpp

@@ -49,7 +49,7 @@ void readADC();
 void failChecks();
 //void sendCMD();
 void calculateSetSpeed(unsigned long timediff);
-void checkLog();
+
 
 void leds();
 
@@ -254,24 +254,8 @@ void loop() {
     last_statsupdate=loopmillis;
   }
 
-  /*  TODO: remove this if, because everything contained in esc.update()
-  if (loopmillis - last_send > SENDPERIOD) { //Calculate motor stuff and send to motor controllers    
-    last_send=loopmillis;
-    //sendCMD();    
   
 
-    //Update speed and trip
-    float _meanRPM=(FeedbackFront.speedL_meas-FeedbackFront.speedR_meas+FeedbackRear.speedL_meas-FeedbackRear.speedR_meas)/4.0;
-    meanSpeedms=_meanRPM*wheelcircumference/60.0;   // Units: 1/min * m / 60s
-    trip+=abs(meanSpeedms)* (SENDPERIOD/1000.0);
-
-    //mah consumed
-    currentConsumed += (motorparamsFront.filtered_curL+motorparamsFront.filtered_curR+motorparamsRear.filtered_curL+motorparamsRear.filtered_curR)* (SENDPERIOD/1000.0)/3600.0; //amp hours
-  }
-  */
-
-  //If needed write log to serial port
-  //checkLog(); //TODO remove
   loggingLoop(loopmillis,escFront,escRear);
   if (!armed && !statswritten) { //write stats only once when disarmed
     statswritten=true;
@@ -306,11 +290,11 @@ void loop() {
     last_fan_update=loopmillis;
     boolean fanstatus=digitalRead(PIN_FAN);
     //float temp=max(escFront.getFeedback_boardTemp(),escRear.getFeedback_boardTemp());
-    float temp=max(temp_ESCFront,temp_ESCRear);
+    float temp=max(temp_Front,temp_Rear);
-    if (temp_ESCFront==DEVICE_DISCONNECTED_C || temp_ESCRear==DEVICE_DISCONNECTED_C ) { //temperature error
+    if (temp_Front==DEVICE_DISCONNECTED_C || temp_Rear==DEVICE_DISCONNECTED_C ) { //temperature error
       digitalWrite(PIN_FAN,HIGH); //force fan on
 
-    }else{ //normal temperature control
+    }else{ //normal temperature control_currentIncrease
       
       if (!fanstatus) { //fan is off
         if (temp>=fan_turn_on_temp){