flipdot/flipcontrol_esp32/src/flipdot.cpp

#include "flipdot.h"



Flipdot::Flipdot()
{
  
}

void Flipdot::init()
{
  pinMode(PIN_SR_DATA, OUTPUT);
  pinMode(PIN_SR_CLK, OUTPUT);
  pinMode(PIN_SR_OE, OUTPUT);
  
  pinMode(PIN_SR_LATCH, OUTPUT);
  pinMode(PIN_CLEAR, OUTPUT);
  pinMode(PIN_DRIVE, OUTPUT);
  

  pinMode(PIN_DATA_DRVBRD, OUTPUT);
  pinMode(PIN_CLK_DRVBRD, OUTPUT);
  pinMode(PIN_RESET_DRVBRD, OUTPUT);
  
  
  digitalWrite(PIN_SR_OE, HIGH); //Active Low
  
  digitalWrite(PIN_SR_LATCH, LOW);
  
  digitalWrite(PIN_DRIVE, LOW);

  digitalWrite(PIN_RESET_DRVBRD,HIGH); //high = reset. set low to enable data flow to driverboard shift registers

  
}



void Flipdot::shiftOutSlow(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val)
{
	uint8_t i;

	for (i = 0; i < 8; i++)  {
		if (bitOrder == LSBFIRST)
			digitalWrite(dataPin, !!(val & (1 << i)));
		else	
			digitalWrite(dataPin, !!(val & (1 << (7 - i))));
			
        delayMicroseconds(MICROS_SHIFTDELAY);
		digitalWrite(clockPin, HIGH);
        delayMicroseconds(MICROS_SHIFTDELAY);
		digitalWrite(clockPin, LOW);
	}
}


void Flipdot::selectColumnClear(uint8_t selcolumn) {
    selectColumn(selcolumn, true); 
}
void Flipdot::selectColumnSet(uint8_t selcolumn) {
    selectColumn(selcolumn, false);
}
void Flipdot::selectColumn(uint8_t selcolumn, bool clear) {
    if (column_reversed) {
        selcolumn=COLUMNBYTES*4-1-1 - selcolumn; //COLUMNBYTES*4-1 = COLUMNS
    }
    //set shift registers for columns to select one column to positive voltage
    uint8_t sc_bit=3-(selcolumn%4); //each two shift registers control four columns
    uint8_t sc_byte=selcolumn/4;

    resetColumns();

    col[sc_byte]=pow(2, (sc_bit*2+clear)); // possible numbers for clear=false: 1,4,16,64
}

bool Flipdot::clearSelectedColumn() {
    shiftDataColumn();

    //Clear Columns

    for (uint8_t cc=0;cc<COLUMNBYTES;cc++) {
        //Serial.print("checking cc="); Serial.println(cc);
        for (uint8_t i=0;i<8;i+=2) {
            if (CHECK_BIT(col[cc],i)) {
                Serial.print("Error on bit ");
                Serial.print(i); Serial.print(" col="); Serial.println(cc);
                return 0; //a column is set to ground (should not be set for clear column)
            }
        }
    }

    digitalWrite(PIN_DRIVE, HIGH);
    digitalWrite(PIN_CLEAR, HIGH);
    delayMicroseconds(MICROS_DRIVEDOTCLEAR);
    digitalWrite(PIN_CLEAR, LOW);
    digitalWrite(PIN_DRIVE, LOW);

    digitalWrite(PIN_RESET_DRVBRD,HIGH); //reset driverboard shift registers
    return 1;
}

bool Flipdot::setSelectedDot() {

    shiftDataRow();
    shiftDataColumn();
    
    for (uint8_t cc=0;cc<COLUMNBYTES;cc++) {
        //Serial.print("checking cc="); Serial.println(cc);
        for (uint8_t i=1;i<8;i+=2) {
            if (CHECK_BIT(col[cc],i)) {
                Serial.print("Error on bit ");
                Serial.print(i); Serial.print(" col="); Serial.println(cc);
                return 0; //a column is set to ground (should not be set for clear column)
            }
        }
    }

    if (!HBridgeOK()) {
        return 0;
    }

    digitalWrite(PIN_SR_OE, LOW); //Active Low. Enable Row
    digitalWrite(PIN_DRIVE, HIGH);
    delayMicroseconds(MICROS_DRIVEDOTSET); //Drive Dot
    digitalWrite(PIN_SR_OE, HIGH); //Active Low
    digitalWrite(PIN_DRIVE, LOW);

    digitalWrite(PIN_RESET_DRVBRD,HIGH); //reset driverboard shift registers
    return 1;
}

bool Flipdot::HBridgeOK() {
    for (uint8_t cc=0;cc<COLUMNBYTES;cc++) {
        //Serial.print("checking cc="); Serial.println(cc);
        for (uint8_t i=0;i<8;i+=2) {
            if (CHECK_BIT(col[cc],i) && CHECK_BIT(col[cc],i+1)) {
                Serial.print("Short circuit on bit ");
                Serial.print(i); Serial.print(" col="); Serial.println(cc);
                return 0; //a column is set to ground (should not be set for clear column)
            }
        }
    }
    return 1;
}


void Flipdot::shiftDataRow() {  //send out all data to shift registers
    
    //select Rows via shift registers on own controller board
    //LSBFIRST= LSB is QH, bit 8 is QA. //upper byte 
    if (rowdata_msbfirst) {
        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, LSBFIRST, row&0xff);  //lower byte
        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, LSBFIRST, row>>8); //MSBFIRST= LSB is QH, bit 8 is QA
    }else{
        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, MSBFIRST, row>>8); //MSBFIRST= LSB is QH, bit 8 is QA
        shiftOutSlow(PIN_SR_DATA, PIN_SR_CLK, MSBFIRST, row&0xff);  //lower byte
    }
    digitalWrite(PIN_SR_LATCH, HIGH);
    delayMicroseconds(MICROS_SHIFT_LATCH);
    digitalWrite(PIN_SR_LATCH, LOW);

}

void Flipdot::shiftDataColumn() {  //send out all data to shift registers
    
    digitalWrite(PIN_RESET_DRVBRD,LOW); //get driverboard shift registers out of reset

    //Select Columns via Shift registers
    for (uint8_t i=0;i<COLUMNBYTES;i++) { //adsf: previously i<7
        shiftOutSlow(PIN_DATA_DRVBRD, PIN_CLK_DRVBRD, LSBFIRST, col[COLUMNBYTES-1-i]); //asdf previously col·[6-i]
    }
}

void Flipdot::resetColumns() {
    for (uint8_t i=0;i<COLUMNBYTES;i++) {
        col[i]=0;
    }
}

void Flipdot::setRow(uint16_t _row){
    row=_row; //data for one column
}

uint16_t Flipdot::getRow() {
    return row;
}

void Flipdot::setDisplayMirror(bool x, bool y){
    rowdata_msbfirst=y; //false=not mirrored (connector at top)
    column_reversed=x;
}