interfisch
/
hoverboard-firmware-hack-foc-serial-esc
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

renamed USART3 to USART because you can also use USART2 not only USART3

This commit is contained in:
kai 2020-01-18 01:08:47 +01:00
parent cd01b73451
commit 04fc584f0a
3 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Inc/config.h
View File

@ -7,7 +7,7 @@
#if !defined(PLATFORMIO)
//#define VARIANT_ADC // Variant for control via ADC input
//#define VARIANT_USART3 // Variant for Serial control via USART3 input
//#define VARIANT_USART // Variant for Serial control via USART3 input
//#define VARIANT_ NUNCHUK // Variant for Nunchuk controlled vehicle build
//#define VARIANT_PPM // Variant for RC-Remote with PPM-Sum Signal
//#define VARIANT_IBUS // Variant for RC-Remotes with FLYSKY IBUS
@ -124,7 +124,7 @@
// #define CONTROL_SERIAL_USART3 // right sensor board cable, disable if I2C (nunchuk or lcd) is used! For Arduino control check the hoverSerial.ino
// #define FEEDBACK_SERIAL_USART3 // right sensor board cable, disable if I2C (nunchuk or lcd) is used!
#define DEBUG_SERIAL_USART3 // right sensor board cable, disable if I2C (nunchuk or lcd) is used!
#elif defined(VARIANT_USART3)
#elif defined(VARIANT_USART)
// #define CONTROL_SERIAL_USART2 // left sensor board cable, disable if ADC or PPM is used! For Arduino control check the hoverSerial.ino
// #define FEEDBACK_SERIAL_USART2 // left sensor board cable, disable if ADC or PPM is used!
// #define DEBUG_SERIAL_USART2 // left sensor board cable, disable if ADC or PPM is used!
@ -333,7 +333,7 @@
// ############################### VALIDATE SETTINGS ###############################
#if !defined(VARIANT_ADC) && !defined(VARIANT_USART3) && !defined(VARIANT_HOVERCAR) && !defined(VARIANT_TRANSPOTTER) && !defined(VARIANT_ NUNCHUK) && !defined(VARIANT_PPM)&& !defined(VARIANT_IBUS)
#if !defined(VARIANT_ADC) && !defined(VARIANT_USART) && !defined(VARIANT_HOVERCAR) && !defined(VARIANT_TRANSPOTTER) && !defined(VARIANT_ NUNCHUK) && !defined(VARIANT_PPM)&& !defined(VARIANT_IBUS)
#error Variant not defined! Please check platformio.ini or Inc/config.h for available variants.
#endif

2
README.md
View File

@ -155,7 +155,7 @@ Most robust way for input is to use the ADC and potis. It works well even on 1m
This firmware offers currently these variants (selectable in [platformio.ini](/platformio.ini) and / or [/Inc/config.h](/Inc/config.h)):
- **VARIANT_ADC**: In this variant the motors are controlled by two potentiometers connected to the Left sensor cable (long wired)
- **VARIANT_USART3**: In this variant the motors are controlled via serial protocol on USART3 right sensor cable (short wired). The commands can be sent from an Arduino. Check out the [hoverserial.ino](/02_Arduino/hoverserial) as an example sketch.
- **VARIANT_USART**: In this variant the motors are controlled via serial protocol on USART3 right sensor cable (short wired). The commands can be sent from an Arduino. Check out the [hoverserial.ino](/02_Arduino/hoverserial) as an example sketch.
- **VARIANT_ NUNCHUK**: Wii Nunchuk offers one hand control for throttle, braking and steering. This was one of the first input device used for electric armchairs or bottle crates.
- **VARIANT_PPM**: This is when you want to use a RC remote control with PPM Sum signal
- **VARIANT_IBUS**: This is when you want to use a RC remote control with Flysky IBUS protocol connected to the Left sensor cable.

6
platformio.ini
View File

@ -10,7 +10,7 @@ src_dir = Src
; Choose one or all variants get built
;
;default_envs = VARIANT_ADC ; Variant for control via ADC input
;default_envs = VARIANT_USART3 ; Variant for Serial control via USART3 input
;default_envs = VARIANT_USART ; Variant for Serial control via USART3 input
;default_envs = VARIANT_ NUNCHUK ; Variant for Nunchuk controlled vehicle build
;default_envs = VARIANT_PPM ; Variant for RC-Remotes with PPM-Sum signal
;default_envs = VARIANT_IBUS ; Variant for RC-Remotes with FLYSKY IBUS
@ -45,7 +45,7 @@ build_flags =
;================================================================
[env:VARIANT_USART3]
[env:VARIANT_USART]
platform = ststm32
framework = stm32cube
board = genericSTM32F103RC
@ -65,7 +65,7 @@ build_flags =
-Wl,-lm
-g -ggdb ; to generate correctly the 'firmware.elf' for STM STUDIO vizualization
# -Wl,-lnosys
-D VARIANT_USART3
-D VARIANT_USART
-D PLATFORMIO
;================================================================