Update README.md
This commit is contained in:
parent
af14b3c4b1
commit
cc7fdda3a5
|
@ -50,7 +50,7 @@ A short video showing the noise performance of the Commutation method vs advance
|
||||||
### Field weakening
|
### Field weakening
|
||||||
|
|
||||||
- By default the Field weakening is disabled. You can enable it in config.h file by setting the FIELD_WEAK_ENA = 1
|
- By default the Field weakening is disabled. You can enable it in config.h file by setting the FIELD_WEAK_ENA = 1
|
||||||
- In BLDC_controller_data.c you can find the field weakening Map as a function of speed: MAP = id_fieldWeak_M1, XAXIS = n_fieldWeak_XA
|
- In BLDC_controller_data.c you can find the field weakening Map as a function of Input target: MAP = id_fieldWeak_M1, XAXIS = r_fieldWeak_XA
|
||||||
- The default calibration was experimentally calibrated to my particular needs
|
- The default calibration was experimentally calibrated to my particular needs
|
||||||
- If you re-calibrate the field weakening map please take all the safety measures! The motors can spin very fast!
|
- If you re-calibrate the field weakening map please take all the safety measures! The motors can spin very fast!
|
||||||
- During the recalibration make sure the speed values in XAXIS are equally spaced for a correct Map interpolation.
|
- During the recalibration make sure the speed values in XAXIS are equally spaced for a correct Map interpolation.
|
||||||
|
@ -147,7 +147,7 @@ A good example of control via UART, eg. from an Arduino or raspberryPi, can be f
|
||||||
https://github.com/p-h-a-i-l/hoverboard-firmware-hack
|
https://github.com/p-h-a-i-l/hoverboard-firmware-hack
|
||||||
|
|
||||||
### Future work
|
### Future work
|
||||||
- conversion of the remaining filters (for the battery voltage, current, and temperature) from floating point to fixed-point. This will reduce further the SMT32 computational load -> DONE
|
- convert all calculations and remaining filters (for the battery voltage, current, and temperature) from floating point to fixed-point. This will reduce further the SMT32 computational load -> **DONE**
|
||||||
|
|
||||||
---
|
---
|
||||||
## Acknowledgements
|
## Acknowledgements
|
||||||
|
|
Loading…
Reference in New Issue