interfisch
/
hoverboard-firmware-hack-serial-esc
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update config.h 

fixed c+p error? DEBUG_SERIAL_USART2 is not present in the whole file .. guess it is CONTROL_SERIAL_USART2?
This commit is contained in:
blubbi321 2018-09-13 21:02:23 +02:00 committed by GitHub
parent 1a49e2cced
commit e56b5cbdb3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Inc/config.h
View File

@ -59,12 +59,12 @@
// ###### CONTROL VIA RC REMOTE ###### // ###### CONTROL VIA RC REMOTE ######
// left sensor board cable. Channel 1: steering, Channel 2: speed. // left sensor board cable. Channel 1: steering, Channel 2: speed.
//#define CONTROL_PPM // use PPM-Sum as input. disable DEBUG_SERIAL_USART2! //#define CONTROL_PPM // use PPM-Sum as input. disable CONTROL_SERIAL_USART2!
//#define PPM_NUM_CHANNELS 6 // total number of PPM channels to receive, even if they are not used. //#define PPM_NUM_CHANNELS 6 // total number of PPM channels to receive, even if they are not used.
// ###### CONTROL VIA TWO POTENTIOMETERS ###### // ###### CONTROL VIA TWO POTENTIOMETERS ######
// ADC-calibration to cover the full poti-range: connect potis to left sensor board cable (0 to 3.3V) (do NOT use the red 15V wire in the cable!). see <How to calibrate>. turn the potis to minimum position, write value 1 to ADC1_MIN and value 2 to ADC2_MIN. turn to maximum position and repeat it for ADC?_MAX. make, flash and test it. // ADC-calibration to cover the full poti-range: connect potis to left sensor board cable (0 to 3.3V) (do NOT use the red 15V wire in the cable!). see <How to calibrate>. turn the potis to minimum position, write value 1 to ADC1_MIN and value 2 to ADC2_MIN. turn to maximum position and repeat it for ADC?_MAX. make, flash and test it.
#define CONTROL_ADC // use ADC as input. disable DEBUG_SERIAL_USART2! #define CONTROL_ADC // use ADC as input. disable CONTROL_SERIAL_USART2!
#define ADC1_MIN 0 // min ADC1-value while poti at minimum-position (0 - 4095) #define ADC1_MIN 0 // min ADC1-value while poti at minimum-position (0 - 4095)
#define ADC1_MAX 4095 // max ADC1-value while poti at maximum-position (0 - 4095) #define ADC1_MAX 4095 // max ADC1-value while poti at maximum-position (0 - 4095)
#define ADC2_MIN 0 // min ADC2-value while poti at minimum-position (0 - 4095) #define ADC2_MIN 0 // min ADC2-value while poti at minimum-position (0 - 4095)