Re-organized nRF24L01.h file to place 'P' features in one

location. Changed some bit value interpretation.

Now auto-detects P-vaiants and is queryable. setDataRate now returns a
boolean indicating success or failure of the new data rate
request. The wide_band state indicator has been added and now tracks
the state, including on error fallback. Its now possible to query the
current data rate via getDataRate().

The AA retry duration has been changed to 1500us, which is the lowest
interval allowed when running at 250Kbs, with AA enabled, and 32-byte
packets.
This commit is contained in:
Greg Copeland 2011-06-27 15:02:33 -05:00
parent 634d0efde5
commit 059efa5ffa
3 changed files with 125 additions and 38 deletions

108
RF24.cpp
View File

@ -8,8 +8,8 @@
#include <WProgram.h>
#include <SPI.h>
#include "RF24.h"
#include "nRF24L01.h"
#include "RF24.h"
#undef SERIAL_DEBUG
#ifdef SERIAL_DEBUG
@ -29,7 +29,7 @@
void RF24::csn(const int mode) const
{
SPI.setDataMode(SPI_MODE0);
SPI.setClockDivider(SPI_CLOCK_DIV8);
SPI.setClockDivider(SPI_CLOCK_DIV2);
digitalWrite(csn_pin,mode);
}
@ -210,8 +210,10 @@ void RF24::print_observe_tx(uint8_t value) const
RF24::RF24(const uint8_t _cepin, const uint8_t _cspin,
const rf24_datarate_e speed, const uint8_t channel):
ce_pin(_cepin), csn_pin(_cspin), wide_band(true), payload_size(32), ack_payload_available(false)
ce_pin(_cepin), csn_pin(_cspin), wide_band(true), p_variant(false),
payload_size(32), ack_payload_available(false)
{
begin() ;
setDataRate( speed ) ;
setChannel( channel ) ;
}
@ -283,13 +285,17 @@ void RF24::printDetails(void) const
printf_P(PSTR("RX_PW_P1 = 0x%02x\n\r"),*buffer);
read_register(EN_AA,buffer,1);
printf_P(PSTR("EN_AA = %02x\n\r"),*buffer);
printf_P(PSTR("EN_AA = 0x%02x\n\r"),*buffer);
read_register(EN_RXADDR,buffer,1);
printf_P(PSTR("EN_RXADDR = %02x\n\r"),*buffer);
printf_P(PSTR("EN_RXADDR = 0x%02x\n\r"),*buffer);
read_register(RF_CH,buffer,1);
printf_P(PSTR("RF_CH = %02x\n\r"),*buffer);
printf_P(PSTR("RF_CH = 0x%02x\n\r"),*buffer);
read_register(RF_SETUP,buffer,1);
printf_P(PSTR("RF_SETUP = 0x%02x (data rate: %d)\n\r"),*buffer,getDataRate());
printf_P(PSTR("Hardware; isPVariant: %d\n\r"),isPVariant());
}
/******************************************************************/
@ -307,8 +313,10 @@ void RF24::begin(void)
SPI.setDataMode(SPI_MODE0);
SPI.setClockDivider(SPI_CLOCK_DIV8);
// Set generous timeouts, to make testing a little easier
write_register(SETUP_RETR,(B1111 << ARD) | (B1111 << ARC));
// Set 1500uS (minimum for 32B payload in ESB@250KBPS) timeouts, to make testing a little easier
// WARNING: If this is ever lowered, either 250KBS mode with AA is broken or maximum packet
// sizes must never be used. See documentation for a more complete explanation.
write_register(SETUP_RETR,(B0100 << ARD) | (B1111 << ARC));
// Reset current status
write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );
@ -319,6 +327,15 @@ void RF24::begin(void)
// Flush buffers
flush_rx();
flush_tx();
// Determine if this is a p or non-p RF24 module and then
// reset our data rate back to default value. This works
// because a non-P variant won't allow the data rate to
// be set to 250KBS.
if( setDataRate( RF24_250KBPS ) ) {
p_variant = true ;
}
setDataRate( RF24_2MBPS ) ;
}
/******************************************************************/
@ -372,7 +389,7 @@ boolean RF24::write( const void* buf, uint8_t len )
ce(HIGH);
// IN the end, the send should be blocking. It comes back in 60ms worst case, or much faster
// if I tighted up the retry logic. (Default settings will be 750us.
// if I tighted up the retry logic. (Default settings will be 1500us.
// Monitor the send
uint8_t observe_tx;
uint8_t status;
@ -600,6 +617,12 @@ boolean RF24::isAckPayloadAvailable(void)
/******************************************************************/
boolean RF24::isPVariant(void) const {
return p_variant ;
}
/******************************************************************/
void RF24::setAutoAck(const bool enable) const
{
if ( enable )
@ -613,7 +636,7 @@ void RF24::setAutoAck(const bool enable) const
void RF24::setAutoAck( const uint8_t pipe, const bool enable ) const
{
uint8_t en_aa = read_register( EN_AA ) ;
en_aa &= ~((enable?0:1)<<pipe) ;
en_aa &= ~((enable?0:1)<<pipe) ;// inverted logic here (1=off, 0=on)
write_register( EN_AA, en_aa ) ;
}
@ -641,24 +664,23 @@ void RF24::setPALevel(const rf24_pa_dbm_e level) const
switch( level )
{
case RF24_PA_MAX:
setup |= RF_PWR_0DB ;
setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;
break ;
case RF24_PA_HIGH:
setup |= RF_PWR_6DB ;
setup |= _BV(RF_PWR_HIGH) ;
break ;
case RF24_PA_LOW:
setup |= RF_PWR_12DB ;
setup |= _BV(RF_PWR_LOW) ;
break ;
case RF24_PA_MIN:
setup |= RF_PWR_18DB ;
break ;
case RF24_PA_ERROR:
// On error, go to maximum PA
setup |= RF_PWR_0DB ;
setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;
break ;
}
@ -670,23 +692,23 @@ void RF24::setPALevel(const rf24_pa_dbm_e level) const
rf24_pa_dbm_e RF24::getPALevel(void) const
{
rf24_pa_dbm_e result = RF24_PA_ERROR ;
uint8_t power = read_register(RF_SETUP) & RF_PWR ;
uint8_t power = read_register(RF_SETUP) & (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;
switch( power )
{
case RF_PWR_0DB:
case (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)):
result = RF24_PA_MAX ;
break ;
case RF_PWR_6DB:
case _BV(RF_PWR_HIGH):
result = RF24_PA_HIGH ;
break ;
case RF_PWR_12DB:
case _BV(RF_PWR_LOW):
result = RF24_PA_LOW ;
break ;
case RF_PWR_18DB:
default:
result = RF24_PA_MIN ;
break ;
}
@ -696,7 +718,7 @@ rf24_pa_dbm_e RF24::getPALevel(void) const
/******************************************************************/
void RF24::setDataRate(const rf24_datarate_e speed)
boolean RF24::setDataRate(const rf24_datarate_e speed)
{
uint8_t setup = read_register(RF_SETUP) ;
@ -707,6 +729,7 @@ void RF24::setDataRate(const rf24_datarate_e speed)
{
// Must set the RF_DR_LOW to 1; RF_DR_HIGH (used to be RF_DR) is already 0
// Making it '10'.
wide_band = false ;
setup |= _BV( RF_DR_LOW ) ;
}
else
@ -715,13 +738,50 @@ void RF24::setDataRate(const rf24_datarate_e speed)
// Making it '01'
if ( speed == RF24_2MBPS )
{
wide_band = true ;
setup |= _BV(RF_DR_HIGH);
wide_band = true ;
setup |= _BV(RF_DR_HIGH);
} else {
// 1Mbs
wide_band = false ;
}
}
write_register(RF_SETUP,setup);
// Verify our result
setup = read_register(RF_SETUP) ;
if( setup == setup ) {
return true ;
}
write_register(RF_SETUP,setup);
wide_band = false ;
return false ;
}
/******************************************************************/
rf24_datarate_e RF24::getDataRate( void ) const {
rf24_datarate_e result ;
uint8_t setup = read_register(RF_SETUP) ;
// Order matters in our case below
switch( setup & (_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)) ) {
case _BV(RF_DR_LOW):
// '10' = 250KBPS
result = RF24_250KBPS ;
break ;
case _BV(RF_DR_HIGH):
// '01' = 2MBPS
result = RF24_2MBPS ;
break ;
default:
// '00' = 1MBPS
result = RF24_1MBPS ;
break ;
}
return result ;
}
/******************************************************************/

30
RF24.h
View File

@ -25,6 +25,7 @@ private:
uint8_t ce_pin; /**< "Chip Enable" pin, activates the RX or TX role */
uint8_t csn_pin; /**< SPI Chip select */
boolean wide_band; /* 2Mbs data rate in use? */
boolean p_variant; /* False for RF24L01 and true for RF24L01P */
uint8_t payload_size; /**< Fixed size of payloads */
boolean ack_payload_available; /**< Whether there is an ack payload waiting */
uint8_t ack_payload_length; /**< Dynamic size of pending ack payload. Note: not used. */
@ -42,6 +43,10 @@ protected:
/**
* Set chip select pin
* Running SPI bus at PI_CLOCK_DIV2 so we don't waist time transferring data
* and best of all, we make use of the radio's FIFO buffers. A lower speed
* means we're less likely to effectively leverage our FIFOs and pay a higher
* AVR runtime cost as toll.
*
* @param mode HIGH to take this unit off the SPI bus, LOW to put it on
*/
@ -416,6 +421,12 @@ public:
*/
boolean isAckPayloadAvailable(void);
/**
* @return Returns true if the hardware is RF24L01P (or compatible) and false
* if its not.
*/
boolean isPVariant(void) const ;
/**
* Enable or disable auto-acknowlede packets
*
@ -471,8 +482,12 @@ public:
void setPALevel( const rf24_pa_dbm_e level ) const ;
/**
* Fetches the current PA level. See setPALevel for
* return value definitions.
* Fetches the current PA level.
*
* @return Returns a value from the rf24_pa_dbm_e enum describing
* the current PA setting. Please remember, all values represented
* by the enum mnemonics are negative dBm. See setPALevel for
* return value descriptions.
*/
rf24_pa_dbm_e getPALevel( void ) const ;
@ -481,7 +496,16 @@ public:
*
* @param speed RF24_250KBPS for 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS for 2Mbps
*/
void setDataRate(const rf24_datarate_e speed);
boolean setDataRate(const rf24_datarate_e speed);
/**
* Set the transmission data rate
*
* @return Returns the hardware's currently configured datarate. The value
* is one of 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS, as defined in the
* rf24_datarate_e enum.
*/
rf24_datarate_e getDataRate( void ) const ;
/**
* Set the CRC length

View File

@ -33,7 +33,6 @@
#define STATUS 0x07
#define OBSERVE_TX 0x08
#define CD 0x09
#define RPD 0x09
#define RX_ADDR_P0 0x0A
#define RX_ADDR_P1 0x0B
#define RX_ADDR_P2 0x0C
@ -74,17 +73,9 @@
#define AW 0
#define ARD 4
#define ARC 0
#define RF_DR_LOW 5
#define PLL_LOCK 4
#define RF_DR_HIGH 3
#define RF_DR 3
#define RF_PWR 6
#define RF_PWR_LOW 1
#define RF_PWR_HIGH 2
#define RF_PWR_0DB 6
#define RF_PWR_6DB 4
#define RF_PWR_12DB 2
#define RF_PWR_18DB 0
#define LNA_HCURR 0
#define RX_DR 6
#define TX_DS 5
#define MAX_RT 4
@ -120,3 +111,15 @@
#define FLUSH_RX 0xE2
#define REUSE_TX_PL 0xE3
#define NOP 0xFF
/* Non-P omissions */
#define LNA_HCURR 0
/* P model memory Map */
#define RPD 0x09
/* P model bit Mnemonics */
#define RF_DR_LOW 5
#define RF_DR_HIGH 3
#define RF_PWR_LOW 1
#define RF_PWR_HIGH 2