a28e2361fc
SPI bus speed divider to 4, suggested by Greg Copeland. Also removed duplicated spi setup out of begin(), as it's all in csn()
2011-09-12 19:27:27 -07:00
a4cabc66a2
Yet more merge cleanup. Changes default channel to be
...
US/Internationally legal while ensuring no spectrum bleed.
2011-09-12 19:22:27 -07:00
7ad1b409fe
More debugging information.
2011-09-12 19:21:49 -07:00
cc7e0a2f19
Fixed a bug when pipe 0 was NOT being used for writing.
2011-09-12 19:11:37 -07:00
5344c5fe8c
CHanged default data rate to 1MBps and default channel to 100 for better performance
2011-08-04 20:46:30 -07:00
4c21ab6ad0
Added back in gcopeland's additional debugging info, with readable values.
2011-08-04 20:16:07 -07:00
8f17e63a22
Add getDataRate, add DISABLED to data rate enum
2011-08-04 20:14:27 -07:00
b715bf0fc8
Comment cleanups
2011-08-02 21:15:14 -07:00
a261710761
Comment cleanups
2011-08-02 20:59:57 -07:00
3aab74ae8f
Merge master with static payload fixes
2011-08-02 16:38:14 -07:00
a31cafcc88
Static and dynamic payloads now fully fixed and interoperable
2011-08-02 16:31:18 -07:00
4542464e0b
Merge fix for static payloads
2011-08-02 15:55:14 -07:00
af00a61555
Fix bug in which static payloads were broken
2011-08-02 15:51:51 -07:00
2f33bdbebd
Experimental changes to help in debugging
2011-08-02 15:24:46 -07:00
df328408f7
Fix bugs. Ack payload available was broken since interrupts went in. stREtries was missing since the gcopeland merge.
2011-08-02 15:24:19 -07:00
cd3b0b3ccb
Merge cleanups
2011-07-31 10:00:21 -07:00
956b63a4dc
sed s/boolean/bool/g
2011-07-31 10:00:09 -07:00
14c34ca2e4
astyle -A1 -s2
2011-07-31 09:47:41 -07:00
602d96264a
Merge gcopeland/constremove
2011-07-31 09:45:40 -07:00
0c2515df19
As a just in case I misunderstood some of the constant-ness changes, I
...
completely took out all of the constant correctness enahcements. Also
added a powerUp() method.
2011-07-19 11:05:18 -05:00
542c46c0c6
Merge branch 'p_enable' into constremove
2011-07-18 15:42:14 -05:00
158164746b
Adds explicit CRC width and PA level. Changes hardware initialization
...
order to minimize noisy/false message reception. Removed begin call
from constructor as begin now has delay which creates timer race
initialization. The delay exists to allow for power on/reset radio
settling which can otherwise prevent CONFIG bits from holding. Added a
method to allow CRC hardware validation to be disabled. This is a
requirement for various promiscuous listening RF applications. Setting
CRC width now forces CRC hardware validation enable.
2011-07-18 15:37:30 -05:00
85c0f57e3f
Removed method argument const qualifiers.
2011-07-16 11:36:10 -05:00
b491480dde
Reverted constructor changes. Changed SPI bus speed. Fixed setAutoAck
...
for specific pipelines per suggestion.
2011-07-16 10:36:36 -05:00
c13db8f42d
Added a second test configuration
2011-07-13 19:13:57 -07:00
1517f1249d
Fixed bug in setcrclength and setdatarate which was mishandling the bits
2011-07-13 19:13:32 -07:00
20e91ab82b
comments
2011-07-10 08:26:49 -07:00
42bf3e8cd2
Purge 'boolean' type, use 'bool' instead
2011-07-10 08:22:30 -07:00
ccf32891f0
comments
2011-07-10 08:18:41 -07:00
9566c82367
Clean up read() to use new-style read_register, which reduces it to two lines of code
2011-07-10 08:12:12 -07:00
63eb62ebc3
Implement dynamic payloads, with an example
2011-07-10 08:00:58 -07:00
32e8b3fbbb
astyle -A1 -s2
2011-07-08 22:29:16 -07:00
b000a87aa1
Optimization of whatHappened, suggested by Mike Denzien
2011-07-08 22:25:44 -07:00
d3fff68a7c
Created a non-blocking write and an example for how to use it.
2011-07-06 20:49:59 -07:00
fbae441249
Factored out status-checking from write() into a public method
2011-07-06 19:51:30 -07:00
c62224ff86
More comments, factored out powerdown from write()
2011-06-29 21:46:46 -07:00
c5823c2605
Made timeouts more explicit in write()
2011-06-29 21:38:17 -07:00
c151ffbf67
Tidied up EN_RXADDR setting
2011-06-28 06:56:24 -07:00
8701d82615
Fix bug in setDataRate
2011-06-28 06:46:45 -07:00
a22906f961
Added setRetries()
2011-06-28 06:44:41 -07:00
04e72775bb
Add dynpd/feature to printDetails
2011-06-28 06:30:03 -07:00
81f85bd521
Prettied up printDetails some more
2011-06-28 06:27:36 -07:00
91df6f6df5
Fixed bug of not including name. Also added extra tab on short strings.
2011-06-27 21:01:58 -07:00
92373ba7f5
Refactor repeated parts of printDetails into own methods
2011-06-27 14:17:00 -07:00
059efa5ffa
Re-organized nRF24L01.h file to place 'P' features in one
...
location. Changed some bit value interpretation.
Now auto-detects P-vaiants and is queryable. setDataRate now returns a
boolean indicating success or failure of the new data rate
request. The wide_band state indicator has been added and now tracks
the state, including on error fallback. Its now possible to query the
current data rate via getDataRate().
The AA retry duration has been changed to 1500us, which is the lowest
interval allowed when running at 250Kbs, with AA enabled, and 32-byte
packets.
2011-06-27 15:02:33 -05:00
aa7a7c647a
Cleaned up some reinterpret casts to use new-style casts
2011-06-25 21:24:42 -07:00
6e6264be43
Fix bug in openReadingPipe which disallowed pipe 5
2011-06-25 21:18:13 -07:00
748fde239b
Add RF_SETUP to printDetails
2011-06-25 21:17:53 -07:00
634d0efde5
Moved the wide_band variable and initializer cleanup.
2011-06-21 15:01:10 -05:00
aac2c3dba3
Added two default values to the RF24 constructor; speed and channel.
...
Some additional constantness cleanup.
2011-06-21 14:58:19 -05:00
maniacbug