Add isValid

Updated led_remote example to use correct var on line 172

RF24.cpp

@@ -649,7 +649,7 @@ void RF24::openReadingPipe(uint8_t child, uint64_t address)
     // Note it would be more efficient to set all of the bits for all open
     // pipes at once.  However, I thought it would make the calling code
     // more simple to do it this way.
-    write_register(EN_RXADDR,read_register(EN_RXADDR) | _BV(child_pipe_enable[child]));
+    write_register(EN_RXADDR,read_register(EN_RXADDR) | _BV(pgm_read_byte(&child_pipe_enable[child])));
   }
 }
 

RF24.h

@@ -637,6 +637,15 @@ public:
    */
   bool testRPD(void) ;
 
+  /**
+   * Test whether this is a real radio, or a mock shim for
+   * debugging.  Setting either pin to 0xff is the way to
+   * indicate that this is not a real radio.
+   *
+   * @return true if this is a legitimate radio 
+   */
+  bool isValid() { return ce_pin != 0xff && csn_pin != 0xff; } 
+
   /**@}*/
 };
 

examples/GettingStarted/GettingStarted.pde

@@ -75,7 +75,7 @@ void setup(void)
 
   // optionally, reduce the payload size.  seems to
   // improve reliability
-  radio.setPayloadSize(8);
+  //radio.setPayloadSize(8);
 
   //
   // Open pipes to other nodes for communication
@@ -86,15 +86,15 @@ void setup(void)
   // Open 'our' pipe for writing
   // Open the 'other' pipe for reading, in position #1 (we can have up to 5 pipes open for reading)
 
-  if ( role == role_ping_out )
+  //if ( role == role_ping_out )
   {
-    radio.openWritingPipe(pipes[0]);
+    //radio.openWritingPipe(pipes[0]);
     radio.openReadingPipe(1,pipes[1]);
   }
-  else
+  //else
   {
-    radio.openWritingPipe(pipes[1]);
-    radio.openReadingPipe(1,pipes[0]);
+    //radio.openWritingPipe(pipes[1]);
+    //radio.openReadingPipe(1,pipes[0]);
   }
 
   //

examples/GettingStarted/Jamfile

@@ -4,7 +4,7 @@ PROJECT_LIBS 	= SPI RF24 ;
 
 # (2) Board Information
 
-UPLOAD_PROTOCOL ?= stk500v1 ;
+UPLOAD_PROTOCOL ?= arduino ;
 UPLOAD_SPEED 	?= 57600 ;
 MCU		?= atmega328p ;
 F_CPU 		?= 16000000 ;
@@ -35,8 +35,8 @@ if $(OS) = MACOSX
 }
 else
 {
-	AVR_BIN 	= /usr/bin ;
-	AVR_INCLUDE 	= /usr/lib/avr/include ;
+	AVR_BIN 	?= /usr/bin ;
+	AVR_INCLUDE 	?= /usr/lib/avr/include ;
 	AVR_ETC 	= /etc ; 
 }
 

examples/led_remote/led_remote.pde

@@ -169,7 +169,7 @@ void setup(void)
     int i = num_led_pins;
     while(i--)
     {
-      pinMode(button_pins[i],OUTPUT);
+      pinMode(led_pins[i],OUTPUT);
       led_states[i] = HIGH;
       digitalWrite(led_pins[i],led_states[i]);
     }

examples/pingpair_irq/Jamfile

@@ -37,7 +37,7 @@ if $(OS) = MACOSX
 else
 {
 	AVR_BIN 	?= /usr/bin ;
-	AVR_INCLUDE 	= /usr/lib/avr/include ;
+	AVR_INCLUDE 	?= /usr/lib/avr/include ;
 	AVR_ETC 	= /etc ; 
 }
 

tests/pingpair_test/pingpair_test.pde

@@ -89,6 +89,8 @@ const int interval = 100; //*< ms to wait between sends */
 
 char configuration = '1'; //*< Configuration key, one char sent in by the test framework to tell us how to configure, this is the default */
 
+uint8_t pipe_number = 1; // Which pipe to send on.
+
 void one_ok(void)
 {
   // Have we received enough yet?
@@ -203,6 +205,20 @@ void setup(void)
     radio.enableDynamicPayloads();
   }
 
+  // Config 4 tests out a higher pipe ##
+  if (configuration == '4' && role == role_sender)
+  {
+    // Set top 4 bytes of the address in pipe 1 
+    radio.openReadingPipe(1,pipe & 0xFFFFFFFF00ULL);
+
+    // indicate the pipe to use 
+    pipe_number = 5;
+  }
+  else if ( role == role_sender )
+  {
+    radio.openReadingPipe(5,0);
+  }
+
   //
   // Open pipes to other nodes for communication
   //
@@ -216,7 +232,7 @@ void setup(void)
   }
   else
   {
-    radio.openReadingPipe(1,pipe);
+    radio.openReadingPipe(pipe_number,pipe);
   }
 
   //
@@ -230,7 +246,7 @@ void setup(void)
   // Dump the configuration of the rf unit for debugging
   //
 
-  //radio.printDetails();
+  radio.printDetails();
 
   //
   // Attach interrupt handler to interrupt #0 (using pin 2)
@@ -410,7 +426,7 @@ void check_radio(void)
 
       // Add an ack packet for the next time around.
       // Here we will report back how many bytes we got this time.
-      radio.writeAckPayload( 1, &len, sizeof(len) );
+      radio.writeAckPayload( pipe_number, &len, sizeof(len) );
       ++message_count;
     }
   }

tests/pingpair_test/runtests.sh

@@ -14,3 +14,8 @@ stty 57600 raw ignbrk hup < /dev/ttyUSB0
 sleep 1
 stty 57600 raw ignbrk hup < /dev/ttyUSB1
 expect test.ex 3
+sleep 1
+stty 57600 raw ignbrk hup < /dev/ttyUSB0
+sleep 1
+stty 57600 raw ignbrk hup < /dev/ttyUSB1
+expect test.ex 4