move most of cpp and header files

include/sensor_anemometer.cpp

@@ -1,4 +1,4 @@
-
+#ifdef SENSOR_ANEMOMETER
 #include "sensor_anemometer.h"
 
 //uses ATS177 Latched hall sensor for rotation sensing
@@ -66,3 +66,5 @@ void Sensor_Anemometer::sensorloop()
 }
 
 
+
+#endif

include/sensor_ldr.h

@@ -1,3 +1,4 @@
+
 #ifndef SENSOR_LDR_H
 #define SENSOR_LDR_H
 
@@ -40,3 +41,4 @@ public:
 
 #endif
 
+

include/sensor_mhz19b.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_MHZ19B
 #include "sensor_mhz19b.h"
 
 
@@ -154,3 +155,5 @@ int Sensor_MHZ19B::mhz19_readValue_reimplemented(Stream *_streamRef, MHZ19 *_mhz
 void Sensor_MHZ19B::calibrateZero() {
   mhz19->calibrateZero();
 }
+
+#endif

include/sensor_mhz19b.h

@@ -32,7 +32,6 @@ private:
     #define BAUD_RATE_MHZ19 9600
 
 
-
     #define MHZ19CALIBRATIONTOPIC
 
 public:

include/sensor_raingauge.cpp

@@ -1,4 +1,4 @@
-
+#ifdef SENSOR_RAINGAUGE
 #include "sensor_raingauge.h"
 
 //uses ATS177 Latched hall sensor for rotation sensing
@@ -79,3 +79,5 @@ void Sensor_Raingauge::sensorloop()
 }
 
 
+
+#endif

include/tcs34725_agc.h

@@ -1,5 +1,4 @@
 //copied from example code: https://github.com/adafruit/Adafruit_TCS34725/blob/master/examples/tcs34725autorange/tcs34725autorange.ino
-#ifdef SENSOR_TCS34725
 
 #ifndef _TCS34725_AGC_H_
 #define _TCS34725_AGC_H_
@@ -47,5 +46,3 @@ public:
 };
 
 #endif
-
-#endif

platformio.ini

@@ -83,31 +83,6 @@ lib_deps =
 
     
 
-#Test
-[env:sensoresptest]
-platform = espressif8266 @ 2.5.0
-board = d1_mini
-framework = arduino
-
-monitor_port = /dev/ttyUSB0
-monitor_speed = 115200
-
-build_flags =
-
-
-    -D SENSOR_RADAR
-    -D SENSOR_RADAR_PIN=D5
-    -D SENSOR_RADAR_readdelay=100
-    -D SENSOR_RADAR_senddelaymax=1000*60*10
-
-    -D SENSOR_LDR
-    -D SENSOR_LDR_PIN=A0
-    -D SENSOR_LDR_CALIB_1
-
-
-lib_deps = 
-    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
-    Homie@3.0.0
 
 #Arbeitszimmer
 [env:sensoresp1]
@@ -323,7 +298,7 @@ lib_deps =
     Homie@3.0.0
     claws/BH1750@1.1.4
 
-#Kueche
+#Badezimmer
 [env:sensoresp7]
 platform = espressif8266 @ 2.5.0
 board = d1_mini
@@ -343,9 +318,11 @@ build_flags =
     -D SENSOR_VL53L1X_senddelaymax=1000*30
     -D SENSOR_VL53L1X_readdelay=500
 
-    -D SENSOR_SHT31
+    -D SENSOR_HTU21D
-    -D SENSOR_SHT31_humidity_minchange=5
+    -D dataHTU21D_temperature_minchange=0.2
-    -D SENSOR_SHT31_temperature_minchange=0.5
+    -D dataHTU21D_temperature_senddelaymax=1000*60*30
+    -D dataHTU21D_humidity_minchange=1.0
+    -D dataHTU21D_humidity_senddelaymax=1000*60*30
 
 lib_deps =
     Bounce2
@@ -353,7 +330,7 @@ lib_deps =
     ArduinoJson@6.16.1
     marvinroger/Homie @ ^3.0.1
     pololu/VL53L1X @ ^1.3.0
-    adafruit/Adafruit SHT31 Library@^2.2.0
+    adafruit/Adafruit HTU21DF Library @ ^1.0.5
 
 #3D Printer
 [env:sensoresp3dprinter]
@@ -379,3 +356,35 @@ lib_deps =
     Homie@3.0.0
 
 
+
+
+
+#Test
+[env:sensoresptest]
+platform = espressif8266 @ 2.5.0
+board = d1_mini
+framework = arduino
+
+monitor_port = /dev/ttyUSB0
+monitor_speed = 115200
+
+build_flags =
+
+    -D SENSOR_HTU21D
+    -D dataHTU21D_temperature_minchange=0.2
+    -D dataHTU21D_temperature_senddelaymax=1000*60*30
+    -D dataHTU21D_humidity_minchange=1.0
+    -D dataHTU21D_humidity_senddelaymax=1000*60*30
+
+
+    -D SENSOR_TCS34725
+    -D SENSOR_TCS34725_LUX_minchange=500
+    -D SENSOR_TCS34725_LUX_senddelaymax=1000*60*1
+    -D SENSOR_TCS34725_COLORTEMP_minchange=100
+    -D SENSOR_TCS34725_LUXFACTOR=0.3 #measured with luxmeter. with half tennis ball was 1.7ev less. 1/2^1.7=0,3078
+
+lib_deps = 
+    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
+    Homie@3.0.0
+    adafruit/Adafruit HTU21DF Library @ ^1.0.5
+    https://github.com/adafruit/Adafruit_TCS34725#1.3.5

src/main.cpp

@@ -32,7 +32,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 
 #ifdef SENSOR_DHT22
-  #include "sensor_dht22.cpp"
+  #include "sensor_dht22.h"
   Sensor_DHT22 sensor_dht22(SENSOR_DHT22_PIN);
 
   #ifndef SENSOR_DHT22_temperature_minchange
@@ -58,7 +58,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 
 #ifdef SENSOR_BMP180
-  #include "sensor_bmp180.cpp"
+  #include "sensor_bmp180.h"
   Sensor_BMP180 sensor_bmp180;
 
   #ifndef SENSOR_BMP180_temperature_minchange
@@ -83,7 +83,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_HTU21D
-  #include "sensor_htu21d.cpp"
+  #include "sensor_htu21d.h"
   Sensor_HTU21D sensor_htu21d;
 
   #ifndef SENSOR_HTU21D_temperature_minchange
@@ -110,7 +110,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 
 #ifdef SENSOR_SHT31
-  #include "sensor_sht31.cpp"
+  #include "sensor_sht31.h"
   Sensor_SHT31 sensor_sht31;
 
   #ifndef SENSOR_SHT31_temperature_minchange
@@ -136,7 +136,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_HS1101
-  #include "sensor_hs1101.cpp"
+  #include "sensor_hs1101.h"
   Sensor_HS1101 sensor_hs1101(SENSOR_HS1101_PIN);
 
   #ifndef SENSOR_HS1101_humidity_minchange
@@ -152,7 +152,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_BH1750
-  #include "sensor_bh1750.cpp"
+  #include "sensor_bh1750.h"
   Sensor_BH1750 sensor_bh1750;
 
   #ifndef SENSOR_BH1750_light_minchange
@@ -167,7 +167,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_ML8511
-  #include "sensor_ml8511.cpp"
+  #include "sensor_ml8511.h"
   Sensor_ML8511 sensor_ml8511(SENSOR_ML8511_PIN);
 
   #ifndef SENSOR_ML8511_minchange
@@ -183,7 +183,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 
 #ifdef SENSOR_HCSR501
-  #include "sensor_hcsr501.cpp"
+  #include "sensor_hcsr501.h"
   Sensor_HCSR501 sensor_hcsr501(SENSOR_HCSR501_PIN);
 
   #ifndef SENSOR_HCSR501_senddelaymax
@@ -195,7 +195,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_RADAR
-  #include "sensor_radar.cpp"
+  #include "sensor_radar.h"
   Sensor_Radar sensor_radar(SENSOR_RADAR_PIN);
 
   #ifndef SENSOR_RADAR_senddelaymax
@@ -207,7 +207,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_LDR
-  #include "sensor_ldr.cpp"
+  #include "sensor_ldr.h"
   Sensor_LDR sensor_ldr(SENSOR_LDR_PIN);
 
   #ifndef SENSOR_LDR_minchange
@@ -259,7 +259,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 
 #ifdef SENSOR_SDS018
-  #include "sensor_sds018.cpp"
+  #include "sensor_sds018.h"
   Sensor_SDS018 sensor_sds018(SENSOR_SDS018_SERIAL_RX,SENSOR_SDS018_SERIAL_TX);
   #ifndef SENSOR_SDS018_PM10_minchange
     #define SENSOR_SDS018_PM10_minchange 10.0
@@ -282,7 +282,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_TCS34725
-  #include "sensor_tcs34725.cpp"
+  #include "sensor_tcs34725.h"
   Sensor_TCS34725 sensor_tcs34725;
   #ifndef SENSOR_TCS34725_LUX_minchange
     #define SENSOR_TCS34725_LUX_minchange 500
@@ -305,7 +305,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_VL53L1X
-  #include "sensor_vl53l1x.cpp"
+  #include "sensor_vl53l1x.h"
   Sensor_VL53L1X sensor_vl53l1x;
   #ifndef SENSOR_VL53L1X_minchange
     #define SENSOR_VL53L1X_minchange 100
@@ -321,6 +321,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #ifdef SENSOR_ANEMOMETER
   void ICACHE_RAM_ATTR interrupt_anemometer();
   #include "sensor_anemometer.cpp"
+
   //Sensor_Anemometer_Instance = new Sensor_Anemometer(SENSOR_Anemometer_PIN);
   Sensor_Anemometer sensor_anemometer(SENSOR_Anemometer_PIN);  
 
@@ -333,6 +334,9 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
     }
   }
 
+
+  
+
   #ifndef SENSOR_Anemometer_minchange
     #define SENSOR_Anemometer_minchange 0.25
   #endif
@@ -345,12 +349,14 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_RAINGAUGE
+  
   //uses ATS177 Latched Hall Sensor for rauge flip sensing
   void ICACHE_RAM_ATTR interrupt_raingauge();
   #include "sensor_raingauge.cpp"
 
   Sensor_Raingauge sensor_raingauge(SENSOR_Raingauge_PIN);
 
+
   void ICACHE_RAM_ATTR interrupt_raingauge()
   {
     if (millis() - sensor_raingauge.raingauge_lastpulse_fordebounce >= RAINGAUGE_DEBOUNCETIME) { //ignore if pulse came too fast
@@ -374,7 +380,7 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 
 #ifdef SENSOR_MULTICHANNELGASGMXXX
-  #include "sensor_multichannelgasgmxxx.cpp"
+  #include "sensor_multichannelgasgmxxx.h"
   Sensor_MULTICHANNELGASGMXXX sensor_multichannelgasgmxxx;
 
   #ifndef SENSOR_MULTICHANNELGASGMXXX_no2_minchange
@@ -432,7 +438,7 @@ void setup() {
   Serial.println();
   Serial.println("Booting");
 
-  delay(1000); //wait for sensors to get powered
+  delay(5000); //wait for sensors to get powered
 
   
   #ifdef SENSOR_DHT22

src/sensor_bh1750.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_BH1750
 //Connect SCL to D1, SDA to D2, GND and 3v3
 #include "sensor_bh1750.h"
 
@@ -63,3 +64,5 @@ void Sensor_BH1750::sensorloop()
     }
   }
 }
+
+#endif

src/sensor_bmp180.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_BMP180
 //Connect SCL to D1, SDA to D2, GND and 3v3
 #include "sensor_bmp180.h"
 
@@ -103,3 +104,6 @@ void Sensor_BMP180::loop_BMP180_pressure()
     d.lastsent=millis();
   }
 }
+
+
+#endif

src/sensor_dht22.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_DHT22
 // Digital pin connected to the DHT sensor.  // dht pins: 1=power, 2=data, 3=NC, 4=GND. 10k from data to power needed 
 #include "sensor_dht22.h"
 
@@ -108,3 +109,5 @@ void Sensor_DHT22::loop_DHT22_humidity()
   }
 }
 
+
+#endif

src/sensor_hcsr501.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_HCSR501
 // PIR Sensors HC-SR501
 // pir sensor needs 5v through an inductor for filtering. output level is 3.3v
 // 100nF capacitor should be soldered between pins 12 and 13 of BISS0001 to stop interference from esp causing false triggers (in some setups). source: https://www.letscontrolit.com/forum/viewtopic.php?t=671
@@ -65,3 +66,6 @@ void Sensor_HCSR501::sensorloop()
 }
 
 
+
+
+#endif

src/sensor_hs1101.cpp

@@ -1,4 +1,4 @@
-
+#ifdef SENSOR_HS1101
 #include "sensor_hs1101.h"
 
 
@@ -102,3 +102,5 @@ int Sensor_HS1101::get_mapped(const unsigned int* _in, const unsigned int* _out,
  // interpolate in the right segment for the rest
  return map(val, _in[pos-1], _in[pos], _out[pos-1], _out[pos]);
 }
+
+#endif

src/sensor_htu21d.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_HTU21D
 //Connect SCL to D1, SDA to D2, GND and 3v3
 #include "sensor_htu21d.h"
 #include <Adafruit_HTU21DF.h>
@@ -52,13 +53,17 @@ void Sensor_HTU21D::sensorloop()
 }
 void Sensor_HTU21D::loop_HTU21D_temperature()
 {
+  
   sensordata &d=data_temperature;
   bool _changed=false;  
 
   if (millis() >= (d.lastreadtime+d.readdelay)) {
+    Serial.println("Reading htu21d temperature");
     d.value = htu->readTemperature();
+    Serial.println(d.value);
     if (fabs(d.lastsentvalue-d.value)>=d.minchange){
       _changed=true;
+      Serial.println("HTU temp changed");
     }
     d.lastreadtime=millis();
   }
@@ -103,3 +108,5 @@ void Sensor_HTU21D::loop_HTU21D_humidity()
     d.lastsent=millis();
   }
 }
+
+#endif

src/sensor_ldr.cpp

@@ -1,3 +1,5 @@
+#ifdef SENSOR_LDR
+
 // High/Low Output LDR Sensor
 // For example: RCWL-0516 (needs 5v input (gnd, vin), 3.3v output level. high for 2seconds when movement detected)
 #include "sensor_ldr.h"
@@ -87,3 +89,4 @@ int Sensor_LDR::get_lux(const unsigned int* _in, const unsigned int* _out, byte
   // interpolate in the right segment for the rest
   return map(val, _in[pos-1], _in[pos], _out[pos-1], _out[pos]);
 }
+#endif

src/sensor_ml8511.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_ML8511
 //ML8511 UV Sensor outputs an analog voltage. ML8511PIN needs to be an ADC pin
 //value as uvIntensity (mW/cm^2)
 #include "sensor_ml8511.h"
@@ -78,3 +79,4 @@ float Sensor_ML8511::mapfloat(float x, float in_min, float in_max, float out_min
 {
   return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
 }
+#endif

src/sensor_multichannelgasgmxxx.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_MULTICHANNELGASGMXXX
 //Connect SCL to D1, SDA to D2, GND and 3v3
 #include "sensor_multichannelgasgmxxx.h"
 
@@ -178,3 +179,5 @@ Serial.print(gas.calcVol(val)); Serial.println("V");
 val = gas.measure_CO(); Serial.print("CO: "); Serial.print(val); Serial.print("  eq  ");
 Serial.print(gas.calcVol(val)); Serial.println("V");
 */
+
+#endif

src/sensor_radar.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_RADAR
 // High/Low Output Radar Sensor
 // For example: RCWL-0516 (needs 5v input (gnd, vin), 3.3v output level. high for 2seconds when movement detected)
 #include "sensor_radar.h"
@@ -59,3 +60,5 @@ void Sensor_Radar::sensorloop()
 }
 
 
+
+#endif

src/sensor_sds018.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_SDS018
 #include "sensor_sds018.h"
 
 // SDS018 example: https://github.com/crystaldust/sds018/blob/master/sds018.ino
@@ -155,3 +156,4 @@ void Sensor_SDS018::readSDS018()
     sds018_swSerial->flush();
   }
 }
+#endif

src/sensor_sht31.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_SHT31
 //Connect SCL to D1, SDA to D2, GND and 3v3
 #include "sensor_sht31.h"
 
@@ -128,3 +129,5 @@ void Sensor_SHT31::checkHeater(float humidity) {
   }
   
 }
+
+#endif

src/sensor_tcs34725.cpp

@@ -1,4 +1,4 @@
-
+#ifdef SENSOR_TCS34725
 #include "sensor_tcs34725.h"
 //#include "Adafruit_TCS34725.h"
 //Adafruit_TCS34725 tcs = Adafruit_TCS34725(TCS34725_INTEGRATIONTIME_700MS, TCS34725_GAIN_1X);  //initializer from standart class
@@ -157,3 +157,5 @@ void Sensor_TCS34725::loop_colortemp()
     d.lastsent=millis();
   }
 }
+
+#endif

src/sensor_vl53l1x.cpp

@@ -1,3 +1,4 @@
+#ifdef SENSOR_VL53L1X
 //Connect SCL to D1, SDA to D2, GND and 3v3
 #include "sensor_vl53l1x.h"
 
@@ -97,3 +98,5 @@ void Sensor_VL53L1X::sensorloop()
     }
   }
 }
+
+#endif

src/tcs34725_agc.cpp

@@ -1,5 +1,5 @@
-#ifdef SENSOR_TCS34725
 
+#ifdef SENSOR_TCS34725
 //#include <Wire.h>
 //#include "Adafruit_TCS34725.h"
 #include "tcs34725_agc.h"