fix mhz19 calibration handler

include/sensor_anemometer.cpp

@@ -0,0 +1,68 @@
+
+#include "sensor_anemometer.h"
+
+//uses ATS177 Latched hall sensor for rotation sensing
+
+Sensor_Anemometer::Sensor_Anemometer(int p)
+{
+  pin=p;  
+}
+
+void Sensor_Anemometer::init() //Things to be done during setup()
+{    
+  pinMode(pin,INPUT_PULLUP);
+  attachInterrupt(digitalPinToInterrupt(pin),interrupt_anemometer,CHANGE); //anemometer interrupt
+  init_ok=true;
+}
+
+//Also called during setup()
+void Sensor_Anemometer::setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay)
+{
+    data.minchange=minchange;
+    data.senddelaymax=senddelaymax;
+    data.readdelay=readdelay;
+}
+
+//Called during setup
+void Sensor_Anemometer::advertise(HomieNode& p_sensorNode)
+{
+    sensorNode = &p_sensorNode;
+    sensorNode->advertise("windspeed");    
+}
+
+void Sensor_Anemometer::sensorloop()
+{
+  if (init_ok) {
+    sensordata &d=data;
+
+    bool _changed=false;
+    if (millis() >= (d.lastreadtime+d.readdelay)) {
+      uint16_t _anepulsesPerMinute=anemometer_pulsecounter/((millis()-anemometer_lasttimereset)/60000.0);
+      d.value = _anepulsesPerMinute*SENSOR_ANEMOMETER_PPMtoMPS;
+      
+      if (abs((int)d.lastsentvalue-d.value)>=d.minchange){ //int abs
+        _changed=true;
+      }
+      d.lastreadtime=millis();
+    }
+
+    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
+      Serial.print("Sending windspeed. reason=");
+      if (_changed) Serial.println("change"); else Serial.println("time");
+
+      Homie.getLogger() << "windspeed tcs " << ": " << d.value << endl;
+      sensorNode->setProperty("windspeed").send(String(d.value));
+
+      //reset when sent. makes it more accurate but keeps fast response
+      anemometer_pulsecounter=0; //reset counter
+      anemometer_lasttimereset=millis();
+      d.lastreadtime=millis(); //also set lastread time to avoid having 1 count with a low time = high windspeed
+          
+      d.lastsentvalue=d.value;
+      
+      d.lastsent=millis();
+    }
+  }
+}
+
+

include/sensor_anemometer.h

@@ -0,0 +1,43 @@
+#ifndef SENSOR_Anemometer_H
+#define SENSOR_Anemometer_H
+
+#include "sensordata.h"
+#include <Homie.h>
+
+
+
+class Sensor_Anemometer
+{
+    
+private:
+    HomieNode *sensorNode; //reference to HomieNode
+
+    int pin;
+
+    struct sensordata data; //struct values are changed in setup()
+    //value in [m/s]
+
+    bool init_ok;
+
+    unsigned long anemometer_lasttimereset=0;
+    
+
+    #define ANEMOMETER_DEBOUNCETIME 15 //15ms between pulses is approx 85m/s windspeed
+    
+    
+public:
+    Sensor_Anemometer(int p);
+
+
+    void init();
+    void setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay);
+    void advertise(HomieNode& p_sensorNode);
+    void sensorloop();
+    //void ICACHE_RAM_ATTR interrupt_anemometer();
+
+    uint16_t anemometer_pulsecounter=0; //counted pulses since last reset
+    unsigned long anemometer_lastpulse_fordebounce=0;
+};
+
+#endif
+

include/sensor_hcsr501.cpp

@@ -10,7 +10,6 @@
 Sensor_HCSR501::Sensor_HCSR501(int pin)
 {
   hcsr501pin=pin;
-  sensordata data;
 }
 
 void Sensor_HCSR501::init() //Things to be done during setup()

include/sensor_hs1101.cpp

@@ -5,7 +5,6 @@
 Sensor_HS1101::Sensor_HS1101(int pin)
 {
   hs1101pin=pin;
-  struct sensordata data;
 
   //out_humidity[] = {1000,900,800,700,600,500,400,300,200,100,0};  //*10, gets later devided by 10
   //in_hs1101frequency[] = {6033,6186,6330,6468,6600,6728,6853,6976,7100,7224,7351};

include/sensor_ldr.cpp

@@ -6,7 +6,6 @@
 Sensor_LDR::Sensor_LDR(int p)
 {
   pin=p;
-  sensordata data;
 }
 
 void Sensor_LDR::init() //Things to be done during setup()

include/sensor_mhz19b.cpp

@@ -66,25 +66,7 @@ void Sensor_MHZ19B::setSettings(float minchange, unsigned long senddelaymax, uns
 }
 
 
-bool Sensor_MHZ19B::mhz19calibrationHandler(const HomieRange& range, const String& value) {
-  if (range.isRange) {
-    return false; //if range is given but index is not in allowed range
-  }
-  Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
 
-  if (value=="zero") {
-    mhz19->calibrateZero();
-    Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
-    #ifdef STATUSNODE
-    sensorNode->setProperty("status").send("MHZ19 Zero Calibration triggered");
-    #endif
-  } else {
-    Homie.getLogger() << "Value outside range" << endl;
-    return false;  
-  }
-  
-  return true;
-}
 
 //Called during setup
 void Sensor_MHZ19B::advertise(HomieNode& p_sensorNode)
@@ -92,7 +74,7 @@ void Sensor_MHZ19B::advertise(HomieNode& p_sensorNode)
     sensorNode = &p_sensorNode;
     sensorNode->advertise("co2");
     #ifdef MHZ19CALIBRATIONTOPIC      
-      sensorNode->advertise("mhz19calibration").settable(&Sensor_MHZ19B::mhz19calibrationHandler)); //not working!!! TODO: Fix it
+      sensorNode->advertise("mhz19calibration").settable(mhz19calibrationHandler);
     #endif
 }
 
@@ -169,4 +151,6 @@ int Sensor_MHZ19B::mhz19_readValue_reimplemented(Stream *_streamRef, MHZ19 *_mhz
   return co2;
 }
 
-
+void Sensor_MHZ19B::calibrateZero() {
+  mhz19->calibrateZero();
+}

include/sensor_mhz19b.h

@@ -33,7 +33,7 @@ private:
 
     
 
-    //#define MHZ19CALIBRATIONTOPIC  //TODO: fix it
+    #define MHZ19CALIBRATIONTOPIC
 
 public:
     Sensor_MHZ19B(int prx, int ptx);
@@ -43,8 +43,7 @@ public:
     void advertise(HomieNode& p_sensorNode);
     void sensorloop();  
 
-    bool mhz19calibrationHandler(const HomieRange& range, const String& value);
+    void calibrateZero();
-    
 };
 
 #endif

include/sensor_radar.cpp

@@ -6,7 +6,6 @@
 Sensor_Radar::Sensor_Radar(int pin)
 {
   radarpin=pin;
-  sensordata data;
 }
 
 void Sensor_Radar::init() //Things to be done during setup()

include/sensor_raingauge.cpp

@@ -0,0 +1,81 @@
+
+#include "sensor_raingauge.h"
+
+//uses ATS177 Latched hall sensor for rotation sensing
+
+Sensor_Raingauge::Sensor_Raingauge(int p)
+{
+  pin=p;  
+}
+
+void Sensor_Raingauge::init() //Things to be done during setup()
+{    
+  init_ok=true;
+  
+  pinMode(pin,INPUT_PULLUP);
+  attachInterrupt(digitalPinToInterrupt(pin),interrupt_raingauge,CHANGE); //anemometer interrupt
+}
+
+//Also called during setup()
+void Sensor_Raingauge::setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay)
+{
+    data.minchange=minchange;
+    data.senddelaymax=senddelaymax;
+    data.readdelay=readdelay;
+}
+
+//Called during setup
+void Sensor_Raingauge::advertise(HomieNode& p_sensorNode)
+{
+    sensorNode = &p_sensorNode;
+    sensorNode->advertise("rain");    
+}
+
+void Sensor_Raingauge::sensorloop()
+{
+  if (init_ok) {
+    sensordata &d=data;
+
+    bool _changed=false;
+    if (millis() >= (d.lastreadtime+d.readdelay)) {
+      
+      if (millis()-raingauge_lasttimereset > d.senddelaymax) {
+        raingauge_idleflag=true; //raingauge didn't flip for a long time
+      }
+      if (raingauge_pulsecounter>0){ //if rg flipped
+        if (raingauge_idleflag) { //last flip is before reset time
+          d.value=raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT; //set to fixed amount if flip was exactly at that time
+          raingauge_idleflag=false;
+        }else{
+          d.value=3600000/(millis()-raingauge_lasttimereset)/raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT;
+          raingauge_idleflag=false;
+        }
+        _changed=true;
+      }
+
+      d.lastreadtime=millis();
+    }
+
+    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
+      Serial.print("Sending rain. reason=");
+      if (_changed) Serial.println("change"); else Serial.println("time");
+
+      if (!_changed) { //no flip since a long time
+        d.value=0; //set to no rain
+      }
+
+      Homie.getLogger() << "rain " << ": " << d.value << endl;
+      sensorNode->setProperty("rain").send(String(d.value));
+
+      //reset when sent. makes it more accurate but keeps fast response
+      raingauge_pulsecounter=0; //reset counter
+      raingauge_lasttimereset=millis();
+          
+      d.lastsentvalue=d.value;
+      
+      d.lastsent=millis();
+    }
+  }
+}
+
+

include/sensor_raingauge.h

@@ -0,0 +1,54 @@
+#ifndef SENSOR_Raingauge_H
+#define SENSOR_Raingauge_H
+
+#include "sensordata.h"
+#include <Homie.h>
+
+
+class Sensor_Raingauge
+{
+    
+private:
+    HomieNode *sensorNode; //reference to HomieNode
+
+    int pin;
+
+    struct sensordata data; //struct values are changed in setup()
+    
+    unsigned long raingauge_lasttimereset=0;
+    
+    bool raingauge_idleflag=true;
+
+    #define RAINGAUGE_DEBOUNCETIME 1000
+    
+
+    bool init_ok;
+
+    //value in [mm] or [L/m^2]
+
+    //#define RAINGAUGE_FLIPAMOUNT 0.38888 //how much mm rain (L/m^2) per gauge flip.  mL (rain to flip) / A (opening area)
+    //was 0.69292 until 201702
+    /* Calibration:
+    * Test1: 1000mL -> 259 Flips
+    * Test2: 1000mL -> 256  in ca 10min
+    * -> 3,9mL per Flip, opening diameter =113mm -> A=0,010028749
+    */
+
+    void updateRaingauge();
+    
+    
+public:
+    Sensor_Raingauge(int p);
+
+
+    void init();
+    void setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay);
+    void advertise(HomieNode& p_sensorNode);
+    void sensorloop();
+    
+    uint16_t raingauge_pulsecounter=0; //counted pulses since last reset
+    unsigned long raingauge_lastpulse_fordebounce=0;
+};
+
+#endif
+

platformio.ini

@@ -51,17 +51,18 @@ build_flags =
     -D SENSOR_ML8511_minchange=0.2
 
     -D SENSOR_ANEMOMETER
-    -D ANEMOMETERPIN=D6 #Light Blue thicker cable (in distribution box)
+    -D SENSOR_Anemometer_PIN=D6 #Light Blue thicker cable (in distribution box)
-    -D dataAnemometer_minchange=0.25
+    -D SENSOR_Anemometer_minchange=0.25
-    -D dataAnemometer_readdelay=1000*30
+    -D SENSOR_Anemometer_readdelay=1000*30
-    -D dataAnemometer_senddelaymax=1000*60*5
+    -D SENSOR_Anemometer_senddelaymax=1000*60*5
-    -D ANEMOMETER_PPMtoMPS=0.0208640462
+    -D SENSOR_ANEMOMETER_PPMtoMPS=0.0208640462
     # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))
 
     -D SENSOR_RAINGAUGE
-    -D RAINGAUGEPIN=D7
+    -D SENSOR_Raingauge_PIN=D7
-    -D dataRaingauge_readdelay=1000
+    -D RAINGAUGE_FLIPAMOUNT=0.38888
-    -D dataRaingauge_senddelaymax=1000*60*60  #also used for rain waiting timeout
+    -D SENSOR_Raingauge_readdelay=1000
+    -D SENSOR_Raingauge_senddelaymax=1000*60*60  #also used for rain waiting timeout
     # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))
     #Cable colors from anemometers sensor (before longer able): blue=gnd, brown=vcc, white=signal
 

src/main.cpp

@@ -21,6 +21,12 @@
 
 #define STATUSNODE
 
+
+// data/homie/config.json hochladen mit platformio run --target uploadfs
+// config contains homie device name, mqtt ip and wifi credentials
+
+HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
+
 #include "sensordata.h"
 
 
@@ -189,9 +195,30 @@
 #endif
 
 #ifdef SENSOR_MHZ19B
+  bool mhz19calibrationHandler(const HomieRange& range, const String& value);
   #include "sensor_mhz19b.cpp"
   Sensor_MHZ19B sensor_mhz19b(SENSOR_MHZ19B_SERIAL_RX,SENSOR_MHZ19B_SERIAL_TX);
 
+  bool mhz19calibrationHandler(const HomieRange& range, const String& value) {
+    if (range.isRange) {
+      return false; //if range is given but index is not in allowed range
+    }
+    Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
+    
+    if (value=="zero") {
+      sensor_mhz19b.calibrateZero();//mhz19->calibrateZero();
+      Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
+      #ifdef STATUSNODE
+      sensorNode.setProperty("status").send("MHZ19 Zero Calibration triggered");
+      #endif
+    } else {
+      Homie.getLogger() << "Value outside range" << endl;
+      return false;  
+    }
+    
+    return true;
+  }
+
   #ifndef SENSOR_MHZ19B_minchange
     #define SENSOR_MHZ19B_minchange 10.0
   #endif
@@ -265,50 +292,58 @@
 #endif
 
 #ifdef SENSOR_ANEMOMETER
-  //uses ATS177 Latched hall sensor for rotation sensing
-  sensordata dataAnemometer;
-  unsigned long anemometer_lasttimereset=0;
-  uint16_t anemometer_pulsecounter=0; //counted pulses since last reset
-
-  #define ANEMOMETER_DEBOUNCETIME 15 //15ms between pulses is approx 85m/s windspeed
-  unsigned long anemometer_lastpulse_fordebounce=0;
-
-  float value_anemometer=0; // [m/s]
-  
   void ICACHE_RAM_ATTR interrupt_anemometer();
-  void updateAnemometer();
+  #include "sensor_anemometer.cpp"
+  //Sensor_Anemometer_Instance = new Sensor_Anemometer(SENSOR_Anemometer_PIN);
+  Sensor_Anemometer sensor_anemometer(SENSOR_Anemometer_PIN);  
+
+  
+  void ICACHE_RAM_ATTR interrupt_anemometer()
+  {
+    if (millis() - sensor_anemometer.anemometer_lastpulse_fordebounce >= ANEMOMETER_DEBOUNCETIME) { //ignore if pulse came too fast
+      sensor_anemometer.anemometer_pulsecounter++;
+      sensor_anemometer.anemometer_lastpulse_fordebounce=millis();
+    }
+  }
+
+  #ifndef SENSOR_Anemometer_minchange
+    #define SENSOR_Anemometer_minchange 0.25
+  #endif
+  #ifndef SENSOR_Anemometer_senddelaymax
+    #define SENSOR_Anemometer_senddelaymax 1000*60*5
+  #endif
+  #ifndef SENSOR_Anemometer_readdelay
+    #define SENSOR_Anemometer_readdelay 1000*30
+  #endif
 #endif
 
 #ifdef SENSOR_RAINGAUGE
   //uses ATS177 Latched Hall Sensor for rauge flip sensing
-  sensordata dataRaingauge;
-  unsigned long raingauge_lasttimereset=0;
-  uint16_t raingauge_pulsecounter=0; //counted pulses since last reset
-  bool raingauge_idleflag=true;
-
-  #define RAINGAUGE_DEBOUNCETIME 1000
-  unsigned long raingauge_lastpulse_fordebounce=0;
-
-  float value_raingauge=0; // [mm] or [L/m^2]
-
-  #define RAINGAUGE_FLIPAMOUNT 0.38888 //how much mm rain (L/m^2) per gauge flip.  mL (rain to flip) / A (opening area)
-  //was 0.69292 until 201702
-  /* Calibration:
-  * Test1: 1000mL -> 259 Flips
-  * Test2: 1000mL -> 256  in ca 10min
-  * -> 3,9mL per Flip, opening diameter =113mm -> A=0,010028749
-  */
-  
   void ICACHE_RAM_ATTR interrupt_raingauge();
-  void updateRaingauge();
+  #include "sensor_raingauge.cpp"
+  
+  Sensor_Raingauge sensor_raingauge(SENSOR_Raingauge_PIN);
+
+  void ICACHE_RAM_ATTR interrupt_raingauge()
+  {
+    if (millis() - sensor_raingauge.raingauge_lastpulse_fordebounce >= RAINGAUGE_DEBOUNCETIME) { //ignore if pulse came too fast
+      sensor_raingauge.raingauge_pulsecounter++;
+      sensor_raingauge.raingauge_lastpulse_fordebounce=millis();
+    }
+  }
+
+  #ifndef SENSOR_Raingauge_minchange
+    #define SENSOR_Raingauge_minchange 0
+  #endif
+  #ifndef SENSOR_Raingauge_senddelaymax
+    #define SENSOR_Raingauge_senddelaymax 1000*60*60
+  #endif
+  #ifndef SENSOR_Raingauge_readdelay
+    #define SENSOR_Raingauge_readdelay 1000
+  #endif
+  
 #endif
 
-// data/homie/config.json hochladen mit platformio run --target uploadfs
-// config contains homie device name, mqtt ip and wifi credentials
-
-
-
-HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 char tempstring[16]; //for dtostrf
 
@@ -401,28 +436,13 @@ void setup() {
   #endif
 
   #ifdef SENSOR_ANEMOMETER
-    pinMode(ANEMOMETERPIN,INPUT_PULLUP);
+    sensor_anemometer.init();
-    attachInterrupt(digitalPinToInterrupt(ANEMOMETERPIN),interrupt_anemometer,CHANGE); //anemometer interrupt
+    sensor_anemometer.setSettings(SENSOR_Anemometer_minchange,SENSOR_Anemometer_senddelaymax,SENSOR_Anemometer_readdelay);    
-    #ifdef dataAnemometer_minchange
-      dataAnemometer.minchange=dataAnemometer_minchange;
-    #endif
-    #ifdef dataAnemometer_readdelay
-      dataAnemometer.readdelay=dataAnemometer_readdelay;
-    #endif
-    #ifdef dataAnemometer_senddelaymax
-      dataAnemometer.senddelaymax=dataAnemometer_senddelaymax;
-    #endif
   #endif
 
   #ifdef SENSOR_RAINGAUGE
-    pinMode(RAINGAUGEPIN,INPUT_PULLUP);
+    sensor_raingauge.init();
-    attachInterrupt(digitalPinToInterrupt(RAINGAUGEPIN),interrupt_raingauge,CHANGE); //anemometer interrupt
+    sensor_raingauge.setSettings(SENSOR_Raingauge_minchange,SENSOR_Raingauge_senddelaymax,SENSOR_Raingauge_readdelay);    
-    #ifdef dataRaingauge_senddelaymax
-      dataRaingauge.senddelaymax=dataRaingauge_senddelaymax;
-    #endif
-    #ifdef dataRaingauge_readdelay
-      dataRaingauge.readdelay=dataRaingauge_readdelay;
-    #endif
   #endif
 
 
@@ -493,11 +513,11 @@ void setup() {
   #endif  
 
   #ifdef SENSOR_ANEMOMETER
-    sensorNode.advertise("windspeed");
+    sensor_anemometer.advertise(sensorNode);
   #endif
 
   #ifdef SENSOR_RAINGAUGE
-    sensorNode.advertise("rain");
+    sensor_raingauge.advertise(sensorNode);
   #endif
   
 
@@ -512,91 +532,6 @@ void loop() {
 }
 
 
-#ifdef SENSOR_ANEMOMETER
-void loop_anemometer()
-{
-  sensordata &d=dataAnemometer;
-
-  bool _changed=false;
-  if (millis() >= (d.lastreadtime+d.readdelay)) {
-    uint16_t _anepulsesPerMinute=anemometer_pulsecounter/((millis()-anemometer_lasttimereset)/60000.0);
-    value_anemometer = _anepulsesPerMinute*ANEMOMETER_PPMtoMPS;
-    
-    if (abs((int)d.lastsentvalue-value_anemometer)>=d.minchange){ //int abs
-      _changed=true;
-    }
-    d.lastreadtime=millis();
-  }
-
-  if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-    Serial.print("Sending windspeed. reason=");
-    if (_changed) Serial.println("change"); else Serial.println("time");
-    checkESPStatus();
-
-    Homie.getLogger() << "windspeed tcs " << ": " << value_anemometer << endl;
-    sensorNode.setProperty("windspeed").send(String(value_anemometer));
-
-    //reset when sent. makes it more accurate but keeps fast response
-    anemometer_pulsecounter=0; //reset counter
-    anemometer_lasttimereset=millis();
-    d.lastreadtime=millis(); //also set lastread time to avoid having 1 count with a low time = high windspeed
-        
-    d.lastsentvalue=value_anemometer;
-    
-    d.lastsent=millis();
-  }
-
-}
-#endif
-
-#ifdef SENSOR_RAINGAUGE
-void loop_raingauge()
-{
-  sensordata &d=dataRaingauge;
-
-  bool _changed=false;
-  if (millis() >= (d.lastreadtime+d.readdelay)) {
-    
-    if (millis()-raingauge_lasttimereset > d.senddelaymax) {
-      raingauge_idleflag=true; //raingauge didn't flip for a long time
-    }
-    if (raingauge_pulsecounter>0){ //if rg flipped
-      if (raingauge_idleflag) { //last flip is before reset time
-        value_raingauge=raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT; //set to fixed amount if flip was exactly at that time
-        raingauge_idleflag=false;
-      }else{
-        value_raingauge=3600000/(millis()-raingauge_lasttimereset)/raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT;
-        raingauge_idleflag=false;
-      }
-      _changed=true;
-    }
-
-    d.lastreadtime=millis();
-  }
-
-  if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-    Serial.print("Sending rain. reason=");
-    if (_changed) Serial.println("change"); else Serial.println("time");
-    checkESPStatus();
-
-    if (!_changed) { //no flip since a long time
-      value_raingauge=0; //set to no rain
-    }
-
-    Homie.getLogger() << "rain " << ": " << value_raingauge << endl;
-    sensorNode.setProperty("rain").send(String(value_raingauge));
-
-    //reset when sent. makes it more accurate but keeps fast response
-    raingauge_pulsecounter=0; //reset counter
-    raingauge_lasttimereset=millis();
-        
-    d.lastsentvalue=value_raingauge;
-    
-    d.lastsent=millis();
-  }
-
-}
-#endif
 
 void loopHandler() {
   checkESPStatus();
@@ -654,11 +589,11 @@ void loopHandler() {
   #endif
 
   #ifdef SENSOR_ANEMOMETER
-    loop_anemometer();
+    sensor_anemometer.sensorloop();
   #endif
 
   #ifdef SENSOR_RAINGAUGE
-    loop_raingauge();
+    sensor_raingauge.sensorloop();
   #endif
 
 }
@@ -673,31 +608,6 @@ void checkESPStatus()
 }
 
 
-
-
-#ifdef SENSOR_ANEMOMETER
-void ICACHE_RAM_ATTR interrupt_anemometer()
-{
-  if (millis() - anemometer_lastpulse_fordebounce >= ANEMOMETER_DEBOUNCETIME) { //ignore if pulse came too fast
-    anemometer_pulsecounter++;
-    anemometer_lastpulse_fordebounce=millis();
-  }
-}
-#endif
-
-#ifdef SENSOR_RAINGAUGE
-void ICACHE_RAM_ATTR interrupt_raingauge()
-{
-  if (millis() - raingauge_lastpulse_fordebounce >= RAINGAUGE_DEBOUNCETIME) { //ignore if pulse came too fast
-    raingauge_pulsecounter++;
-    raingauge_lastpulse_fordebounce=millis();
-  }
-}
-#endif
-
-
-
-
 /*##################################
 * ######## HELPER FUNCTIONS ########
 */