include/sensor_anemometer.cpp

@@ -1,68 +0,0 @@
-
-#include "sensor_anemometer.h"
-
-//uses ATS177 Latched hall sensor for rotation sensing
-
-Sensor_Anemometer::Sensor_Anemometer(int p)
-{
-  pin=p;  
-}
-
-void Sensor_Anemometer::init() //Things to be done during setup()
-{    
-  pinMode(pin,INPUT_PULLUP);
-  attachInterrupt(digitalPinToInterrupt(pin),interrupt_anemometer,CHANGE); //anemometer interrupt
-  init_ok=true;
-}
-
-//Also called during setup()
-void Sensor_Anemometer::setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay)
-{
-    data.minchange=minchange;
-    data.senddelaymax=senddelaymax;
-    data.readdelay=readdelay;
-}
-
-//Called during setup
-void Sensor_Anemometer::advertise(HomieNode& p_sensorNode)
-{
-    sensorNode = &p_sensorNode;
-    sensorNode->advertise("windspeed");    
-}
-
-void Sensor_Anemometer::sensorloop()
-{
-  if (init_ok) {
-    sensordata &d=data;
-
-    bool _changed=false;
-    if (millis() >= (d.lastreadtime+d.readdelay)) {
-      uint16_t _anepulsesPerMinute=anemometer_pulsecounter/((millis()-anemometer_lasttimereset)/60000.0);
-      d.value = _anepulsesPerMinute*SENSOR_ANEMOMETER_PPMtoMPS;
-      
-      if (abs((int)d.lastsentvalue-d.value)>=d.minchange){ //int abs
-        _changed=true;
-      }
-      d.lastreadtime=millis();
-    }
-
-    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-      Serial.print("Sending windspeed. reason=");
-      if (_changed) Serial.println("change"); else Serial.println("time");
-
-      Homie.getLogger() << "windspeed tcs " << ": " << d.value << endl;
-      sensorNode->setProperty("windspeed").send(String(d.value));
-
-      //reset when sent. makes it more accurate but keeps fast response
-      anemometer_pulsecounter=0; //reset counter
-      anemometer_lasttimereset=millis();
-      d.lastreadtime=millis(); //also set lastread time to avoid having 1 count with a low time = high windspeed
-          
-      d.lastsentvalue=d.value;
-      
-      d.lastsent=millis();
-    }
-  }
-}
-
-

include/sensor_anemometer.h

@@ -1,43 +0,0 @@
-#ifndef SENSOR_Anemometer_H
-#define SENSOR_Anemometer_H
-
-#include "sensordata.h"
-#include <Homie.h>
-
-
-
-class Sensor_Anemometer
-{
-    
-private:
-    HomieNode *sensorNode; //reference to HomieNode
-
-    int pin;
-
-    struct sensordata data; //struct values are changed in setup()
-    //value in [m/s]
-
-    bool init_ok;
-
-    unsigned long anemometer_lasttimereset=0;
-    
-
-    #define ANEMOMETER_DEBOUNCETIME 15 //15ms between pulses is approx 85m/s windspeed
-    
-    
-public:
-    Sensor_Anemometer(int p);
-
-
-    void init();
-    void setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay);
-    void advertise(HomieNode& p_sensorNode);
-    void sensorloop();
-    //void ICACHE_RAM_ATTR interrupt_anemometer();
-
-    uint16_t anemometer_pulsecounter=0; //counted pulses since last reset
-    unsigned long anemometer_lastpulse_fordebounce=0;
-};
-
-#endif
-

include/sensor_hcsr501.cpp

@@ -10,6 +10,7 @@
 Sensor_HCSR501::Sensor_HCSR501(int pin)
 {
   hcsr501pin=pin;
+  sensordata data;
 }
 
 void Sensor_HCSR501::init() //Things to be done during setup()

include/sensor_hs1101.cpp

@@ -5,6 +5,7 @@
 Sensor_HS1101::Sensor_HS1101(int pin)
 {
   hs1101pin=pin;
+  struct sensordata data;
 
   //out_humidity[] = {1000,900,800,700,600,500,400,300,200,100,0};  //*10, gets later devided by 10
   //in_hs1101frequency[] = {6033,6186,6330,6468,6600,6728,6853,6976,7100,7224,7351};

include/sensor_ldr.cpp

@@ -6,6 +6,7 @@
 Sensor_LDR::Sensor_LDR(int p)
 {
   pin=p;
+  sensordata data;
 }
 
 void Sensor_LDR::init() //Things to be done during setup()

include/sensor_mhz19b.cpp

@@ -66,7 +66,25 @@ void Sensor_MHZ19B::setSettings(float minchange, unsigned long senddelaymax, uns
 }
 
 
+bool Sensor_MHZ19B::mhz19calibrationHandler(const HomieRange& range, const String& value) {
+  if (range.isRange) {
+    return false; //if range is given but index is not in allowed range
+  }
+  Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
   
+  if (value=="zero") {
+    mhz19->calibrateZero();
+    Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
+    #ifdef STATUSNODE
+    sensorNode->setProperty("status").send("MHZ19 Zero Calibration triggered");
+    #endif
+  } else {
+    Homie.getLogger() << "Value outside range" << endl;
+    return false;  
+  }
+  
+  return true;
+}
 
 //Called during setup
 void Sensor_MHZ19B::advertise(HomieNode& p_sensorNode)
@@ -74,7 +92,7 @@ void Sensor_MHZ19B::advertise(HomieNode& p_sensorNode)
     sensorNode = &p_sensorNode;
     sensorNode->advertise("co2");
     #ifdef MHZ19CALIBRATIONTOPIC      
-      sensorNode->advertise("mhz19calibration").settable(mhz19calibrationHandler);
+      sensorNode->advertise("mhz19calibration").settable(&Sensor_MHZ19B::mhz19calibrationHandler)); //not working!!! TODO: Fix it
     #endif
 }
 
@@ -151,6 +169,4 @@ int Sensor_MHZ19B::mhz19_readValue_reimplemented(Stream *_streamRef, MHZ19 *_mhz
   return co2;
 }
 
-void Sensor_MHZ19B::calibrateZero() {
+
-  mhz19->calibrateZero();
-}

include/sensor_mhz19b.h

@@ -33,7 +33,7 @@ private:
 
     
 
-    #define MHZ19CALIBRATIONTOPIC
+    //#define MHZ19CALIBRATIONTOPIC  //TODO: fix it
 
 public:
     Sensor_MHZ19B(int prx, int ptx);
@@ -43,7 +43,8 @@ public:
     void advertise(HomieNode& p_sensorNode);
     void sensorloop();
 
-    void calibrateZero();
+    bool mhz19calibrationHandler(const HomieRange& range, const String& value);
+    
 };
 
 #endif

include/sensor_radar.cpp

@@ -6,6 +6,7 @@
 Sensor_Radar::Sensor_Radar(int pin)
 {
   radarpin=pin;
+  sensordata data;
 }
 
 void Sensor_Radar::init() //Things to be done during setup()

include/sensor_raingauge.cpp

@@ -1,81 +0,0 @@
-
-#include "sensor_raingauge.h"
-
-//uses ATS177 Latched hall sensor for rotation sensing
-
-Sensor_Raingauge::Sensor_Raingauge(int p)
-{
-  pin=p;  
-}
-
-void Sensor_Raingauge::init() //Things to be done during setup()
-{    
-  init_ok=true;
-  
-  pinMode(pin,INPUT_PULLUP);
-  attachInterrupt(digitalPinToInterrupt(pin),interrupt_raingauge,CHANGE); //anemometer interrupt
-}
-
-//Also called during setup()
-void Sensor_Raingauge::setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay)
-{
-    data.minchange=minchange;
-    data.senddelaymax=senddelaymax;
-    data.readdelay=readdelay;
-}
-
-//Called during setup
-void Sensor_Raingauge::advertise(HomieNode& p_sensorNode)
-{
-    sensorNode = &p_sensorNode;
-    sensorNode->advertise("rain");    
-}
-
-void Sensor_Raingauge::sensorloop()
-{
-  if (init_ok) {
-    sensordata &d=data;
-
-    bool _changed=false;
-    if (millis() >= (d.lastreadtime+d.readdelay)) {
-      
-      if (millis()-raingauge_lasttimereset > d.senddelaymax) {
-        raingauge_idleflag=true; //raingauge didn't flip for a long time
-      }
-      if (raingauge_pulsecounter>0){ //if rg flipped
-        if (raingauge_idleflag) { //last flip is before reset time
-          d.value=raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT; //set to fixed amount if flip was exactly at that time
-          raingauge_idleflag=false;
-        }else{
-          d.value=3600000/(millis()-raingauge_lasttimereset)/raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT;
-          raingauge_idleflag=false;
-        }
-        _changed=true;
-      }
-
-      d.lastreadtime=millis();
-    }
-
-    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-      Serial.print("Sending rain. reason=");
-      if (_changed) Serial.println("change"); else Serial.println("time");
-
-      if (!_changed) { //no flip since a long time
-        d.value=0; //set to no rain
-      }
-
-      Homie.getLogger() << "rain " << ": " << d.value << endl;
-      sensorNode->setProperty("rain").send(String(d.value));
-
-      //reset when sent. makes it more accurate but keeps fast response
-      raingauge_pulsecounter=0; //reset counter
-      raingauge_lasttimereset=millis();
-          
-      d.lastsentvalue=d.value;
-      
-      d.lastsent=millis();
-    }
-  }
-}
-
-

include/sensor_raingauge.h

@@ -1,54 +0,0 @@
-#ifndef SENSOR_Raingauge_H
-#define SENSOR_Raingauge_H
-
-#include "sensordata.h"
-#include <Homie.h>
-
-
-class Sensor_Raingauge
-{
-    
-private:
-    HomieNode *sensorNode; //reference to HomieNode
-
-    int pin;
-
-    struct sensordata data; //struct values are changed in setup()
-    
-    unsigned long raingauge_lasttimereset=0;
-    
-    bool raingauge_idleflag=true;
-
-    #define RAINGAUGE_DEBOUNCETIME 1000
-    
-
-    bool init_ok;
-
-    //value in [mm] or [L/m^2]
-
-    //#define RAINGAUGE_FLIPAMOUNT 0.38888 //how much mm rain (L/m^2) per gauge flip.  mL (rain to flip) / A (opening area)
-    //was 0.69292 until 201702
-    /* Calibration:
-    * Test1: 1000mL -> 259 Flips
-    * Test2: 1000mL -> 256  in ca 10min
-    * -> 3,9mL per Flip, opening diameter =113mm -> A=0,010028749
-    */
-
-    void updateRaingauge();
-    
-    
-public:
-    Sensor_Raingauge(int p);
-
-
-    void init();
-    void setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay);
-    void advertise(HomieNode& p_sensorNode);
-    void sensorloop();
-    
-    uint16_t raingauge_pulsecounter=0; //counted pulses since last reset
-    unsigned long raingauge_lastpulse_fordebounce=0;
-};
-
-#endif
-

platformio.ini

@@ -51,18 +51,17 @@ build_flags =
     -D SENSOR_ML8511_minchange=0.2
 
     -D SENSOR_ANEMOMETER
-    -D SENSOR_Anemometer_PIN=D6 #Light Blue thicker cable (in distribution box)
+    -D ANEMOMETERPIN=D6 #Light Blue thicker cable (in distribution box)
-    -D SENSOR_Anemometer_minchange=0.25
+    -D dataAnemometer_minchange=0.25
-    -D SENSOR_Anemometer_readdelay=1000*30
+    -D dataAnemometer_readdelay=1000*30
-    -D SENSOR_Anemometer_senddelaymax=1000*60*5
+    -D dataAnemometer_senddelaymax=1000*60*5
-    -D SENSOR_ANEMOMETER_PPMtoMPS=0.0208640462
+    -D ANEMOMETER_PPMtoMPS=0.0208640462
     # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))
 
     -D SENSOR_RAINGAUGE
-    -D SENSOR_Raingauge_PIN=D7
+    -D RAINGAUGEPIN=D7
-    -D RAINGAUGE_FLIPAMOUNT=0.38888
+    -D dataRaingauge_readdelay=1000
-    -D SENSOR_Raingauge_readdelay=1000
+    -D dataRaingauge_senddelaymax=1000*60*60  #also used for rain waiting timeout
-    -D SENSOR_Raingauge_senddelaymax=1000*60*60  #also used for rain waiting timeout
     # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))
     #Cable colors from anemometers sensor (before longer able): blue=gnd, brown=vcc, white=signal
 

src/main.cpp

@@ -21,12 +21,6 @@
 
 #define STATUSNODE
 
-
-// data/homie/config.json hochladen mit platformio run --target uploadfs
-// config contains homie device name, mqtt ip and wifi credentials
-
-HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
-
 #include "sensordata.h"
 
 
@@ -195,30 +189,9 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_MHZ19B
-  bool mhz19calibrationHandler(const HomieRange& range, const String& value);
   #include "sensor_mhz19b.cpp"
   Sensor_MHZ19B sensor_mhz19b(SENSOR_MHZ19B_SERIAL_RX,SENSOR_MHZ19B_SERIAL_TX);
 
-  bool mhz19calibrationHandler(const HomieRange& range, const String& value) {
-    if (range.isRange) {
-      return false; //if range is given but index is not in allowed range
-    }
-    Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
-    
-    if (value=="zero") {
-      sensor_mhz19b.calibrateZero();//mhz19->calibrateZero();
-      Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
-      #ifdef STATUSNODE
-      sensorNode.setProperty("status").send("MHZ19 Zero Calibration triggered");
-      #endif
-    } else {
-      Homie.getLogger() << "Value outside range" << endl;
-      return false;  
-    }
-    
-    return true;
-  }
-
   #ifndef SENSOR_MHZ19B_minchange
     #define SENSOR_MHZ19B_minchange 10.0
   #endif
@@ -292,58 +265,50 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 #ifdef SENSOR_ANEMOMETER
+  //uses ATS177 Latched hall sensor for rotation sensing
+  sensordata dataAnemometer;
+  unsigned long anemometer_lasttimereset=0;
+  uint16_t anemometer_pulsecounter=0; //counted pulses since last reset
+
+  #define ANEMOMETER_DEBOUNCETIME 15 //15ms between pulses is approx 85m/s windspeed
+  unsigned long anemometer_lastpulse_fordebounce=0;
+
+  float value_anemometer=0; // [m/s]
+  
   void ICACHE_RAM_ATTR interrupt_anemometer();
-  #include "sensor_anemometer.cpp"
+  void updateAnemometer();
-  //Sensor_Anemometer_Instance = new Sensor_Anemometer(SENSOR_Anemometer_PIN);
-  Sensor_Anemometer sensor_anemometer(SENSOR_Anemometer_PIN);  
-
-  
-  void ICACHE_RAM_ATTR interrupt_anemometer()
-  {
-    if (millis() - sensor_anemometer.anemometer_lastpulse_fordebounce >= ANEMOMETER_DEBOUNCETIME) { //ignore if pulse came too fast
-      sensor_anemometer.anemometer_pulsecounter++;
-      sensor_anemometer.anemometer_lastpulse_fordebounce=millis();
-    }
-  }
-
-  #ifndef SENSOR_Anemometer_minchange
-    #define SENSOR_Anemometer_minchange 0.25
-  #endif
-  #ifndef SENSOR_Anemometer_senddelaymax
-    #define SENSOR_Anemometer_senddelaymax 1000*60*5
-  #endif
-  #ifndef SENSOR_Anemometer_readdelay
-    #define SENSOR_Anemometer_readdelay 1000*30
-  #endif
 #endif
 
 #ifdef SENSOR_RAINGAUGE
   //uses ATS177 Latched Hall Sensor for rauge flip sensing
+  sensordata dataRaingauge;
+  unsigned long raingauge_lasttimereset=0;
+  uint16_t raingauge_pulsecounter=0; //counted pulses since last reset
+  bool raingauge_idleflag=true;
+
+  #define RAINGAUGE_DEBOUNCETIME 1000
+  unsigned long raingauge_lastpulse_fordebounce=0;
+
+  float value_raingauge=0; // [mm] or [L/m^2]
+
+  #define RAINGAUGE_FLIPAMOUNT 0.38888 //how much mm rain (L/m^2) per gauge flip.  mL (rain to flip) / A (opening area)
+  //was 0.69292 until 201702
+  /* Calibration:
+  * Test1: 1000mL -> 259 Flips
+  * Test2: 1000mL -> 256  in ca 10min
+  * -> 3,9mL per Flip, opening diameter =113mm -> A=0,010028749
+  */
+  
   void ICACHE_RAM_ATTR interrupt_raingauge();
-  #include "sensor_raingauge.cpp"
+  void updateRaingauge();
-  
-  Sensor_Raingauge sensor_raingauge(SENSOR_Raingauge_PIN);
-
-  void ICACHE_RAM_ATTR interrupt_raingauge()
-  {
-    if (millis() - sensor_raingauge.raingauge_lastpulse_fordebounce >= RAINGAUGE_DEBOUNCETIME) { //ignore if pulse came too fast
-      sensor_raingauge.raingauge_pulsecounter++;
-      sensor_raingauge.raingauge_lastpulse_fordebounce=millis();
-    }
-  }
-
-  #ifndef SENSOR_Raingauge_minchange
-    #define SENSOR_Raingauge_minchange 0
-  #endif
-  #ifndef SENSOR_Raingauge_senddelaymax
-    #define SENSOR_Raingauge_senddelaymax 1000*60*60
-  #endif
-  #ifndef SENSOR_Raingauge_readdelay
-    #define SENSOR_Raingauge_readdelay 1000
-  #endif
-  
 #endif
 
+// data/homie/config.json hochladen mit platformio run --target uploadfs
+// config contains homie device name, mqtt ip and wifi credentials
+
+
+
+HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 
 char tempstring[16]; //for dtostrf
 
@@ -436,13 +401,28 @@ void setup() {
   #endif
 
   #ifdef SENSOR_ANEMOMETER
-    sensor_anemometer.init();
+    pinMode(ANEMOMETERPIN,INPUT_PULLUP);
-    sensor_anemometer.setSettings(SENSOR_Anemometer_minchange,SENSOR_Anemometer_senddelaymax,SENSOR_Anemometer_readdelay);    
+    attachInterrupt(digitalPinToInterrupt(ANEMOMETERPIN),interrupt_anemometer,CHANGE); //anemometer interrupt
+    #ifdef dataAnemometer_minchange
+      dataAnemometer.minchange=dataAnemometer_minchange;
+    #endif
+    #ifdef dataAnemometer_readdelay
+      dataAnemometer.readdelay=dataAnemometer_readdelay;
+    #endif
+    #ifdef dataAnemometer_senddelaymax
+      dataAnemometer.senddelaymax=dataAnemometer_senddelaymax;
+    #endif
   #endif
 
   #ifdef SENSOR_RAINGAUGE
-    sensor_raingauge.init();
+    pinMode(RAINGAUGEPIN,INPUT_PULLUP);
-    sensor_raingauge.setSettings(SENSOR_Raingauge_minchange,SENSOR_Raingauge_senddelaymax,SENSOR_Raingauge_readdelay);    
+    attachInterrupt(digitalPinToInterrupt(RAINGAUGEPIN),interrupt_raingauge,CHANGE); //anemometer interrupt
+    #ifdef dataRaingauge_senddelaymax
+      dataRaingauge.senddelaymax=dataRaingauge_senddelaymax;
+    #endif
+    #ifdef dataRaingauge_readdelay
+      dataRaingauge.readdelay=dataRaingauge_readdelay;
+    #endif
   #endif
 
 
@@ -513,11 +493,11 @@ void setup() {
   #endif  
 
   #ifdef SENSOR_ANEMOMETER
-    sensor_anemometer.advertise(sensorNode);
+    sensorNode.advertise("windspeed");
   #endif
 
   #ifdef SENSOR_RAINGAUGE
-    sensor_raingauge.advertise(sensorNode);
+    sensorNode.advertise("rain");
   #endif
   
 
@@ -532,6 +512,91 @@ void loop() {
 }
 
 
+#ifdef SENSOR_ANEMOMETER
+void loop_anemometer()
+{
+  sensordata &d=dataAnemometer;
+
+  bool _changed=false;
+  if (millis() >= (d.lastreadtime+d.readdelay)) {
+    uint16_t _anepulsesPerMinute=anemometer_pulsecounter/((millis()-anemometer_lasttimereset)/60000.0);
+    value_anemometer = _anepulsesPerMinute*ANEMOMETER_PPMtoMPS;
+    
+    if (abs((int)d.lastsentvalue-value_anemometer)>=d.minchange){ //int abs
+      _changed=true;
+    }
+    d.lastreadtime=millis();
+  }
+
+  if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
+    Serial.print("Sending windspeed. reason=");
+    if (_changed) Serial.println("change"); else Serial.println("time");
+    checkESPStatus();
+
+    Homie.getLogger() << "windspeed tcs " << ": " << value_anemometer << endl;
+    sensorNode.setProperty("windspeed").send(String(value_anemometer));
+
+    //reset when sent. makes it more accurate but keeps fast response
+    anemometer_pulsecounter=0; //reset counter
+    anemometer_lasttimereset=millis();
+    d.lastreadtime=millis(); //also set lastread time to avoid having 1 count with a low time = high windspeed
+        
+    d.lastsentvalue=value_anemometer;
+    
+    d.lastsent=millis();
+  }
+
+}
+#endif
+
+#ifdef SENSOR_RAINGAUGE
+void loop_raingauge()
+{
+  sensordata &d=dataRaingauge;
+
+  bool _changed=false;
+  if (millis() >= (d.lastreadtime+d.readdelay)) {
+    
+    if (millis()-raingauge_lasttimereset > d.senddelaymax) {
+      raingauge_idleflag=true; //raingauge didn't flip for a long time
+    }
+    if (raingauge_pulsecounter>0){ //if rg flipped
+      if (raingauge_idleflag) { //last flip is before reset time
+        value_raingauge=raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT; //set to fixed amount if flip was exactly at that time
+        raingauge_idleflag=false;
+      }else{
+        value_raingauge=3600000/(millis()-raingauge_lasttimereset)/raingauge_pulsecounter*RAINGAUGE_FLIPAMOUNT;
+        raingauge_idleflag=false;
+      }
+      _changed=true;
+    }
+
+    d.lastreadtime=millis();
+  }
+
+  if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
+    Serial.print("Sending rain. reason=");
+    if (_changed) Serial.println("change"); else Serial.println("time");
+    checkESPStatus();
+
+    if (!_changed) { //no flip since a long time
+      value_raingauge=0; //set to no rain
+    }
+
+    Homie.getLogger() << "rain " << ": " << value_raingauge << endl;
+    sensorNode.setProperty("rain").send(String(value_raingauge));
+
+    //reset when sent. makes it more accurate but keeps fast response
+    raingauge_pulsecounter=0; //reset counter
+    raingauge_lasttimereset=millis();
+        
+    d.lastsentvalue=value_raingauge;
+    
+    d.lastsent=millis();
+  }
+
+}
+#endif
 
 void loopHandler() {
   checkESPStatus();
@@ -589,11 +654,11 @@ void loopHandler() {
   #endif
 
   #ifdef SENSOR_ANEMOMETER
-    sensor_anemometer.sensorloop();
+    loop_anemometer();
   #endif
 
   #ifdef SENSOR_RAINGAUGE
-    sensor_raingauge.sensorloop();
+    loop_raingauge();
   #endif
 
 }
@@ -608,6 +673,31 @@ void checkESPStatus()
 }
 
 
+
+
+#ifdef SENSOR_ANEMOMETER
+void ICACHE_RAM_ATTR interrupt_anemometer()
+{
+  if (millis() - anemometer_lastpulse_fordebounce >= ANEMOMETER_DEBOUNCETIME) { //ignore if pulse came too fast
+    anemometer_pulsecounter++;
+    anemometer_lastpulse_fordebounce=millis();
+  }
+}
+#endif
+
+#ifdef SENSOR_RAINGAUGE
+void ICACHE_RAM_ATTR interrupt_raingauge()
+{
+  if (millis() - raingauge_lastpulse_fordebounce >= RAINGAUGE_DEBOUNCETIME) { //ignore if pulse came too fast
+    raingauge_pulsecounter++;
+    raingauge_lastpulse_fordebounce=millis();
+  }
+}
+#endif
+
+
+
+
 /*##################################
 * ######## HELPER FUNCTIONS ########
 */