include/sensor_multichannelgasgmxxx.cpp

@@ -1,180 +0,0 @@
-//Connect SCL to D1, SDA to D2, GND and 3v3
-#include "sensor_multichannelgasgmxxx.h"
-
-
-
-Sensor_MULTICHANNELGASGMXXX::Sensor_MULTICHANNELGASGMXXX()
-{
-  gas = new GAS_GMXXX<TwoWire>();
-}
-
-void Sensor_MULTICHANNELGASGMXXX::init() //Things to be done during setup()
-{    
-  Serial.println("initializing MULTICHANNELGASGMXXX");
-  //The default addrss is 0x08;
-  //gas.begin(MyWire, 0x08); // use the software I2C
-  //gas.setAddress(0x64); change thee I2C address
-  gas->begin(Wire, 0x08);
-  
-  init_ok=true;
-}
-
-
-
-//Also called during setup()
-void Sensor_MULTICHANNELGASGMXXX::setSettings_no2(float minchange, unsigned long senddelaymax, unsigned long readdelay)
-{
-    data_no2.minchange=minchange;
-    data_no2.senddelaymax=senddelaymax;
-    data_no2.readdelay=readdelay;
-}
-void Sensor_MULTICHANNELGASGMXXX::setSettings_c2h5oh(float minchange, unsigned long senddelaymax, unsigned long readdelay)
-{
-    data_c2h5oh.minchange=minchange;
-    data_c2h5oh.senddelaymax=senddelaymax;
-    data_c2h5oh.readdelay=readdelay;
-}
-void Sensor_MULTICHANNELGASGMXXX::setSettings_voc(float minchange, unsigned long senddelaymax, unsigned long readdelay)
-{
-    data_voc.minchange=minchange;
-    data_voc.senddelaymax=senddelaymax;
-    data_voc.readdelay=readdelay;
-}
-void Sensor_MULTICHANNELGASGMXXX::setSettings_co(float minchange, unsigned long senddelaymax, unsigned long readdelay)
-{
-    data_co.minchange=minchange;
-    data_co.senddelaymax=senddelaymax;
-    data_co.readdelay=readdelay;
-}
-
-
-//Called during setup
-void Sensor_MULTICHANNELGASGMXXX::advertise(HomieNode& p_sensorNode)
-{
-    sensorNode = &p_sensorNode;
-    sensorNode->advertise("no2");
-    sensorNode->advertise("c2h5oh");
-    sensorNode->advertise("voc");
-    sensorNode->advertise("co");
-}
-
-
-void Sensor_MULTICHANNELGASGMXXX::sensorloop_no2()
-{
-  if (init_ok) {
-    sensordata &d=data_no2;
-    
-    bool _changed=false;
-    if (millis() >= (d.lastreadtime+d.readdelay)) {
-      d.value = gas->calcVol(gas->measure_NO2()); // Volt
-      if (fabs(d.lastsentvalue-d.value)>=d.minchange){
-        _changed=true;
-      }
-      d.lastreadtime=millis();
-    }
-
-    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-      Serial.print("Sending MULTICHANNELGASGMXXX no2. reason=");
-      if (_changed) Serial.println("change"); else Serial.println("time");
-
-      Homie.getLogger() << "no2 " << ": " << d.value << endl;
-      sensorNode->setProperty("no2").send(String(d.value));
-      d.lastsentvalue=d.value;
-      
-      d.lastsent=millis();
-    }
-  }
-}
-
-void Sensor_MULTICHANNELGASGMXXX::sensorloop_c2h5oh()
-{
-  if (init_ok) {
-    sensordata &d=data_c2h5oh;
-    
-    bool _changed=false;
-    if (millis() >= (d.lastreadtime+d.readdelay)) {
-      d.value = gas->calcVol(gas->measure_C2H5OH()); // Volt
-      if (fabs(d.lastsentvalue-d.value)>=d.minchange){
-        _changed=true;
-      }
-      d.lastreadtime=millis();
-    }
-
-    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-      Serial.print("Sending MULTICHANNELGASGMXXX c2h5oh. reason=");
-      if (_changed) Serial.println("change"); else Serial.println("time");
-
-      Homie.getLogger() << "c2h5oh " << ": " << d.value << endl;
-      sensorNode->setProperty("c2h5oh").send(String(d.value));
-      d.lastsentvalue=d.value;
-      
-      d.lastsent=millis();
-    }
-  }
-}
-
-void Sensor_MULTICHANNELGASGMXXX::sensorloop_voc()
-{
-  if (init_ok) {
-    sensordata &d=data_voc;
-    
-    bool _changed=false;
-    if (millis() >= (d.lastreadtime+d.readdelay)) {
-      d.value = gas->calcVol(gas->measure_VOC()); // Volt
-      if (fabs(d.lastsentvalue-d.value)>=d.minchange){
-        _changed=true;
-      }
-      d.lastreadtime=millis();
-    }
-
-    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-      Serial.print("Sending MULTICHANNELGASGMXXX voc. reason=");
-      if (_changed) Serial.println("change"); else Serial.println("time");
-
-      Homie.getLogger() << "voc " << ": " << d.value << endl;
-      sensorNode->setProperty("voc").send(String(d.value));
-      d.lastsentvalue=d.value;
-      
-      d.lastsent=millis();
-    }
-  }
-}
-
-void Sensor_MULTICHANNELGASGMXXX::sensorloop_co()
-{
-  if (init_ok) {
-    sensordata &d=data_co;
-    
-    bool _changed=false;
-    if (millis() >= (d.lastreadtime+d.readdelay)) {
-      d.value = gas->calcVol(gas->measure_CO()); // Volt
-      if (fabs(d.lastsentvalue-d.value)>=d.minchange){
-        _changed=true;
-      }
-      d.lastreadtime=millis();
-    }
-
-    if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-      Serial.print("Sending MULTICHANNELGASGMXXX co. reason=");
-      if (_changed) Serial.println("change"); else Serial.println("time");
-
-      Homie.getLogger() << "co " << ": " << d.value << endl;
-      sensorNode->setProperty("co").send(String(d.value));
-      d.lastsentvalue=d.value;
-      
-      d.lastsent=millis();
-    }
-  }
-}
-
-
-/*
-val = gas.measure_NO2(); Serial.print("NO2: "); Serial.print(val); Serial.print("  eq  ");
-Serial.print(gas.calcVol(val)); Serial.println("V");
-val = gas.measure_C2H5OH(); Serial.print("C2H5OH: "); Serial.print(val); Serial.print("  eq  ");
-Serial.print(gas.calcVol(val)); Serial.println("V");
-val = gas.measure_VOC(); Serial.print("VOC: "); Serial.print(val); Serial.print("  eq  ");
-Serial.print(gas.calcVol(val)); Serial.println("V");
-val = gas.measure_CO(); Serial.print("CO: "); Serial.print(val); Serial.print("  eq  ");
-Serial.print(gas.calcVol(val)); Serial.println("V");
-*/

include/sensor_multichannelgasgmxxx.h

@@ -1,43 +0,0 @@
-#ifndef SENSOR_MULTICHANNELGASGMXXX_H
-#define SENSOR_MULTICHANNELGASGMXXX_H
-
-#include "sensordata.h"
-#include <Homie.h>
-
-#include <Multichannel_Gas_GMXXX.h>
-#include <Wire.h>
-
-
-class Sensor_MULTICHANNELGASGMXXX
-{
-    
-private:
-    GAS_GMXXX<TwoWire> *gas;
-    HomieNode *sensorNode; //reference to HomieNode
-
-    struct sensordata data_no2; //struct values are changed in setup()
-    struct sensordata data_c2h5oh;
-    struct sensordata data_voc;
-    struct sensordata data_co;
-
-
-    bool init_ok;
-
-public:
-    Sensor_MULTICHANNELGASGMXXX();
-
-    void init();
-    void setSettings_no2(float minchange, unsigned long senddelaymax, unsigned long readdelay);
-    void setSettings_c2h5oh(float minchange, unsigned long senddelaymax, unsigned long readdelay);
-    void setSettings_voc(float minchange, unsigned long senddelaymax, unsigned long readdelay);
-    void setSettings_co(float minchange, unsigned long senddelaymax, unsigned long readdelay);
-    void advertise(HomieNode& p_sensorNode);
-    void sensorloop_no2();
-    void sensorloop_c2h5oh();
-    void sensorloop_voc();
-    void sensorloop_co();
-    
-};
-
-#endif
-

platformio.ini

@@ -18,9 +18,8 @@
 #data_dir=data_sensoresp3
 #data_dir=data_sensoresp4
 #data_dir=data_sensoresp5
-data_dir=data_sensoresp6
 #data_dir=data_sensoresp3dprinter
-#data_dir=data_sensoresptest
+data_dir=data_sensoresptest
 
 
 #Outdoor
@@ -274,37 +273,6 @@ lib_deps =
     pololu/VL53L1X @ ^1.3.0
 
 
-#Flur Gas, motion
-[env:sensoresp6]
-platform = espressif8266 @ 2.5.0
-board = d1_mini
-framework = arduino
-
-monitor_port = /dev/ttyUSB0
-monitor_speed = 115200
-
-build_flags =
-    -D SENSOR_MULTICHANNELGASGMXXX
-    -D SENSOR_MULTICHANNELGASGMXXX_no2_minchange=0.1
-    -D SENSOR_MULTICHANNELGASGMXXX_c2h5oh_minchange=0.1
-    -D SENSOR_MULTICHANNELGASGMXXX_voc_minchange=0.1
-    -D SENSOR_MULTICHANNELGASGMXXX_co_minchange=0.1
-    -D SENSOR_MULTICHANNELGASGMXXX_no2_senddelaymax=600000
-    -D SENSOR_MULTICHANNELGASGMXXX_c2h5oh_senddelaymax=600000
-    -D SENSOR_MULTICHANNELGASGMXXX_voc_senddelaymax=600000
-    -D SENSOR_MULTICHANNELGASGMXXX_co_senddelaymax=600000
-
-    -D SENSOR_HTU21D
-    -D dataHTU21D_temperature_minchange=0.2
-    -D dataHTU21D_temperature_senddelaymax=1000*60*60
-    -D dataHTU21D_humidity_minchange=1.0
-    -D dataHTU21D_humidity_senddelaymax=1000*60*60
-
-lib_deps =
-    https://github.com/Seeed-Studio/Seeed_Arduino_MultiGas
-    adafruit/Adafruit HTU21DF Library @ ^1.0.5
-    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
-    Homie@3.0.0
 
 #3D Printer
 [env:sensoresp3dprinter]

src/main.cpp

@@ -345,55 +345,6 @@ HomieNode sensorNode("sensors", "Sensors","sensors");  //id, name, type
 #endif
 
 
-
-#ifdef SENSOR_MULTICHANNELGASGMXXX
-  #include "sensor_multichannelgasgmxxx.cpp"
-  Sensor_MULTICHANNELGASGMXXX sensor_multichannelgasgmxxx;
-
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_no2_minchange
-    #define SENSOR_MULTICHANNELGASGMXXX_no2_minchange 0.1
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_no2_senddelaymax
-    #define SENSOR_MULTICHANNELGASGMXXX_no2_senddelaymax 600000
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_no2_readdelay
-    #define SENSOR_MULTICHANNELGASGMXXX_no2_readdelay 10000
-  #endif
-
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_c2h5oh_minchange
-    #define SENSOR_MULTICHANNELGASGMXXX_c2h5oh_minchange 0.1
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_c2h5oh_senddelaymax
-    #define SENSOR_MULTICHANNELGASGMXXX_c2h5oh_senddelaymax 600000
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_c2h5oh_readdelay
-    #define SENSOR_MULTICHANNELGASGMXXX_c2h5oh_readdelay 10000
-  #endif
-
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_voc_minchange
-    #define SENSOR_MULTICHANNELGASGMXXX_voc_minchange 0.1
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_voc_senddelaymax
-    #define SENSOR_MULTICHANNELGASGMXXX_voc_senddelaymax 600000
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_voc_readdelay
-    #define SENSOR_MULTICHANNELGASGMXXX_voc_readdelay 10000
-  #endif
-
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_co_minchange
-    #define SENSOR_MULTICHANNELGASGMXXX_co_minchange 0.1
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_co_senddelaymax
-    #define SENSOR_MULTICHANNELGASGMXXX_co_senddelaymax 600000
-  #endif
-  #ifndef SENSOR_MULTICHANNELGASGMXXX_co_readdelay
-    #define SENSOR_MULTICHANNELGASGMXXX_co_readdelay 10000
-  #endif
-
-  
-#endif
-
-
 char tempstring[16]; //for dtostrf
 
 
@@ -494,14 +445,6 @@ void setup() {
     sensor_raingauge.setSettings(SENSOR_Raingauge_minchange,SENSOR_Raingauge_senddelaymax,SENSOR_Raingauge_readdelay);    
   #endif
 
-  #ifdef SENSOR_MULTICHANNELGASGMXXX
-    sensor_multichannelgasgmxxx.init();
-    sensor_multichannelgasgmxxx.setSettings_no2(SENSOR_MULTICHANNELGASGMXXX_no2_minchange,SENSOR_MULTICHANNELGASGMXXX_no2_senddelaymax,SENSOR_MULTICHANNELGASGMXXX_no2_readdelay);
-    sensor_multichannelgasgmxxx.setSettings_c2h5oh(SENSOR_MULTICHANNELGASGMXXX_c2h5oh_minchange,SENSOR_MULTICHANNELGASGMXXX_c2h5oh_senddelaymax,SENSOR_MULTICHANNELGASGMXXX_c2h5oh_readdelay);
-    sensor_multichannelgasgmxxx.setSettings_voc(SENSOR_MULTICHANNELGASGMXXX_voc_minchange,SENSOR_MULTICHANNELGASGMXXX_voc_senddelaymax,SENSOR_MULTICHANNELGASGMXXX_voc_readdelay);
-    sensor_multichannelgasgmxxx.setSettings_co(SENSOR_MULTICHANNELGASGMXXX_co_minchange,SENSOR_MULTICHANNELGASGMXXX_co_senddelaymax,SENSOR_MULTICHANNELGASGMXXX_co_readdelay);
-  #endif
-
 
   // ##### Advertise topics below here #####
   
@@ -576,10 +519,6 @@ void setup() {
   #ifdef SENSOR_RAINGAUGE
     sensor_raingauge.advertise(sensorNode);
   #endif
-
-  #ifdef SENSOR_MULTICHANNELGASGMXXX
-    sensor_multichannelgasgmxxx.advertise(sensorNode);
-  #endif
   
 
   Serial.println("connecting..");
@@ -657,13 +596,6 @@ void loopHandler() {
     sensor_raingauge.sensorloop();
   #endif
 
-  #ifdef SENSOR_MULTICHANNELGASGMXXX
-    sensor_multichannelgasgmxxx.sensorloop_no2();
-    sensor_multichannelgasgmxxx.sensorloop_c2h5oh();
-    sensor_multichannelgasgmxxx.sensorloop_voc();
-    sensor_multichannelgasgmxxx.sensorloop_co();
-  #endif
-
 }