sensoresp/platformio.ini

281 lines
6.9 KiB
INI

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
# Flash upload with platformio run -t upload --environment sensorespx
[platformio]
#For Config upload comment in data_dir line and flash with platformio run -t uploadfs --environment sensorespx
#data_dir=data_sensoresp0
#data_dir=data_sensoresp1
#data_dir=data_sensoresp2
#data_dir=data_sensoresp3
#data_dir=data_sensoresp4
#data_dir=data_sensoresp5
#data_dir=data_sensoresp3dprinter
#Outdoor
[env:sensoresp0]
platform = espressif8266 @ 2.5.0 #using old esp version, because of "obsolete API, use ::begin(WiFiClient, url)" error. Try again if fix available in platformio over vscode
board = d1_mini
framework = arduino
monitor_port = /dev/ttyUSB0
monitor_speed = 115200
build_flags =
-D SENSOR_BMP180
-D dataBMP180_temperature_minchange=0.5
-D dataBMP180_pressure_minchange=0.5
-D SENSOR_TCS34725
-D dataTCS34725_lux_minchange=500
-D dataTCS34725_lux_senddelaymax=1000*60*1
-D dataTCS34725_colortemp_minchange=100
-D TCS34725_LUXFACTOR=0.3 #measured with luxmeter. with half tennis ball was 1.7ev less. 1/2^1.7=0,3078
-D SENSOR_HS1101
-D HS1101PIN=D5
-D dataHS1101_minchange=10
-D SENSOR_ML8511
-D ML8511PIN=A0
-D dataML8511_minchange=0.2
-D SENSOR_ANEMOMETER
-D ANEMOMETERPIN=D6 #Light Blue thicker cable (in distribution box)
-D dataAnemometer_minchange=0.25
-D dataAnemometer_readdelay=1000*30
-D dataAnemometer_senddelaymax=1000*60*5
-D ANEMOMETER_PPMtoMPS=0.0208640462
# Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))
-D SENSOR_RAINGAUGE
-D RAINGAUGEPIN=D7
-D dataRaingauge_readdelay=1000
-D dataRaingauge_senddelaymax=1000*60*60 #also used for rain waiting timeout
# Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))
#Cable colors from anemometers sensor (before longer able): blue=gnd, brown=vcc, white=signal
lib_deps =
Adafruit BMP085 Library@1.1.0
https://github.com/adafruit/Adafruit_TCS34725
ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
Homie@3.0.0
#Arbeitszimmer
[env:sensoresp1]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino
monitor_port = /dev/ttyUSB0
monitor_speed = 115200
build_flags =
-D SENSOR_DHT22
-D DHTPIN=D7
-D dataDHT22_temperature_minchange=0.2
-D dataDHT22_humidity_minchange=2.0
-D SENSOR_BMP180
-D dataBMP180_temperature_minchange=0.2
-D dataBMP180_pressure_minchange=0.5
-D SENSOR_PIR
-D PIRPIN=D6
-D dataPIR_readdelay=100
-D dataPIR_senddelaymax=1000*60*10
-D SENSOR_LDR
-D SENSOR_LDR_CALIB1
-D LDR_PIN=A0
-D dataLDR_minchange=10.0
-D dataLDR_readdelay=1000*2
-D dataBH1750_senddelaymax=1000*60*1
lib_deps =
Adafruit BMP085 Library@1.1.0
DHT sensor library@1.3.10
ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
Homie@3.0.0
#Wohnzimmer Air Quality
[env:sensoresp2]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino
monitor_port = /dev/ttyUSB0
monitor_speed = 115200
build_flags =
-D SENSOR_MHZ19
-D MHZ19_SERIAL_RX=D5
-D MHZ19_SERIAL_TX=D6
-D dataMHZ19_minchange=10
-D dataMHZ19_readdelay=10*1000
-D SENSOR_SDS018
-D SDS018_SERIAL_RX=D7
-D SDS018_SERIAL_TX=D8
-D dataSDS018_pm25_minchange=4
-D dataSDS018_pm10_minchange=4
lib_deps =
klevytskyi/MHZ19@0.0.1
EspSoftwareSerial@6.8.1
ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
Homie@3.0.0
#Wohnzimmer
[env:sensoresp3]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino
monitor_port = /dev/ttyUSB0
monitor_speed = 115200
build_flags =
-D SENSOR_DHT22
-D DHTPIN=D7
-D dataDHT22_temperature_minchange=0.2
-D dataDHT22_humidity_minchange=1.0
-D SENSOR_PIR
-D PIRPIN=D6
-D dataPIR_readdelay=100
-D dataPIR_senddelaymax=1000*60*10
-D SENSOR_BH1750
-D dataBH1750_minchange=10.0
-D dataBH1750_senddelaymax=1000*60*2
lib_deps =
adafruit/DHT sensor library@1.3.10
claws/BH1750@1.1.4
ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
Homie@3.0.0
#Schlafzimmer
[env:sensoresp4]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino
monitor_port = /dev/ttyUSB0
monitor_speed = 115200
build_flags =
-D SENSOR_DHT22
-D DHTPIN=D7
-D dataDHT22_temperature_minchange=0.2
-D dataDHT22_humidity_minchange=1.0
-D SENSOR_PIR
-D PIRPIN=D0
-D dataPIR_readdelay=100
-D dataPIR_senddelaymax=1000*60*10
-D SENSOR_BH1750
-D dataBH1750_minchange=10.0
-D dataBH1750_senddelaymax=1000*60*2
-D SENSOR_MHZ19
-D MHZ19_SERIAL_RX=D5
-D MHZ19_SERIAL_TX=D6
-D dataMHZ19_minchange=10
-D dataMHZ19_readdelay=10*1000
lib_deps =
adafruit/DHT sensor library@1.3.10
claws/BH1750@1.1.4
klevytskyi/MHZ19@0.0.1
EspSoftwareSerial@6.8.1
ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
Homie@3.0.0
#Kueche
[env:sensoresp5]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino
#monitor_port = /dev/ttyUSB0
monitor_port = COM3
monitor_speed = 115200
build_flags =
-D SENSOR_DHT22
-D DHTPIN=D7
-D dataDHT22_temperature_minchange=0.2
-D dataDHT22_humidity_minchange=1.0
-D SENSOR_PIR
-D PIRPIN=D6
-D dataPIR_readdelay=100
-D dataPIR_senddelaymax=1000*60*10
-D SENSOR_RADAR
-D RADARPIN=D5
-D dataRADAR_readdelay=100
-D dataRADAR_senddelaymax=1000*60*10
-D SENSOR_BH1750
-D dataBH1750_minchange=10.0
-D dataBH1750_senddelaymax=1000*60*2
-D SENSOR_VL53L1X
-D dataVL53L1X_minchange=100
-D dataVL53L1X_senddelaymax=1000*30
-D dataVL53L1X_readdelay=1000
lib_deps =
adafruit/DHT sensor library@1.3.10
claws/BH1750@1.1.4
ArduinoJson@6.16.1
marvinroger/Homie @ ^3.0.1
pololu/VL53L1X @ ^1.3.0
#3D Printer
[env:sensoresp3dprinter]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino
monitor_port = /dev/ttyUSB0
monitor_speed = 115200
build_flags =
-D SENSOR_HTU21D
-D dataHTU21D_temperature_minchange=0.2
-D dataHTU21D_temperature_senddelaymax=1000*60*20
-D dataHTU21D_humidity_minchange=1.0
-D dataHTU21D_humidity_senddelaymax=1000*60*10
lib_deps =
adafruit/Adafruit HTU21DF Library @ ^1.0.5
ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
Homie@3.0.0