achterbahnconfig/achterbahnconfig/achterbahnconfig.pde

@@ -166,7 +166,6 @@ void setup() {
       
     
   myPort = new Serial(this, "/dev/ttyUSB0", 115200);
-  //myPort = new Serial(this, "COM3", 115200);
 }
 
 void Set() {
@@ -192,6 +191,7 @@ void printHeightmap() {
   myPort.write(writeserial);
 }
 
+
 void Debug() {
   String writeserial="debug\n";
   myPort.write(writeserial);

src/main.cpp

@@ -35,7 +35,7 @@ void saveHeightmapRaw();
 
 #define PIN_LDR A0 //comment if not used
 
-#define PIN D4
+#define PIN D2
 #define NUMPIXELS 600
 
 Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
@@ -46,7 +46,7 @@ long lastRoutineUpdate=0;
 #define ROUTINEUPDATETIME 20
 long lastCheckspawn=0;
 #define CHECKSPAWNDELAY 2000 //delay in ms to check random spawn
-#define SPAWNCHANCE 10 //1 out of x times wagon will spawn
+#define SPAWNCHANCE 20 //1 out of x times wagon will spawn
 #define SPAWNCHANCEDOUBLE 5 //change of spawning a two trains simultaneously
 long lastCheckspawnEffect=0;
 #define CHECKSPAWNDELAY_EFFECT 5000 //delay in ms to check random effect
@@ -263,23 +263,22 @@ void spawnWagon(){
   //                                                      pos,      wagonlength,       startvel                                                                  ,  startacc,      trainmass,      wagoncolor
   //Wagon tmpr = Wagon(maxid++,NUMPIXELS,&strip, height, random(0, 20), _randomlength, random(map(_randomlength,3,40,1,1), map(_randomlength,3,40, 13,40))/10.0  , 0           , 5 , Wheel((uint8_t)random(0,255))); //spawn new wagon
 
-  int side_startpos=0; //start at beginning of strip
-  int side_multi=1; //start in forward direction
+  int side_startpos=0;
+  int side_multi=1;
 
-  
-  /*if (random(0,2)==0){ //spawn from other side
+  /*
+  if (random(0,2)==0){ //spawn from other side
     side_startpos=NUMPIXELS+_randomlength;
     side_multi=-1;
-  }*/
-  
+  }
+  */
 
   //Force start from end of strip
-  //side_startpos=NUMPIXELS+_randomlength; //start at end of strip
-  //side_multi=-1; //start in backward direction
+  side_startpos=NUMPIXELS+_randomlength;
+  side_multi=-1;
+
+  Wagon tmpr = Wagon(maxid++,NUMPIXELS,&strip, height, side_startpos, _randomlength, side_multi*random(map(_randomlength,3,20,0,10)/10.0, map(_randomlength,3,20, 5,40))/10.0  , 0           , random(3.0,7.0) , Wheel((uint8_t)random(0,255))); //spawn new wagon   
   
-  //Wagon tmpr = Wagon(maxid++,NUMPIXELS,&strip, height, side_startpos, _randomlength, side_multi*random(map(_randomlength,3,30,0,40)/10.0, map(_randomlength,3,30, 5,60))/10.0  , 0           , random(3.0,7.0) , Wheel((uint8_t)random(0,255))); //spawn new wagon   
-  Wagon tmpr = Wagon(maxid++,NUMPIXELS,&strip, height, side_startpos, _randomlength, side_multi*random(map(_randomlength,3,30,30,100)/10.0, map(_randomlength,3,30, 5,60))/10.0  , 0           , 1.8 , Wheel((uint8_t)random(0,255))); //spawn new wagon   
-  //Mass: the lighter the faster is changes speed
 
   
   
@@ -310,8 +309,8 @@ void loop() {
     if (millis()-last_ldrread > 10000) {
       int _light=analogRead(PIN_LDR);
       uint8_t _brightness = constrain(map(_light, LDR_MIN, LDR_MAX, BRIGHTNESS_RUN_MIN, BRIGHTNESS_RUN), BRIGHTNESS_RUN_MIN, BRIGHTNESS_RUN);
-      //Serial.print("kilian="); Serial.println(_light);
-      //Serial.print("ergbebinis="); Serial.println(_brightness);
+      Serial.print("kilian="); Serial.println(_light);
+      Serial.print("ergbebinis="); Serial.println(_brightness);
       strip.setBrightness(_brightness);
       last_ldrread=millis();
     }
@@ -678,7 +677,6 @@ void saveHeightmapRaw(){
     c_eepromaddress++;
     
   }
-  Serial.println("Saved to EEPROM");
   EEPROM.commit(); //write changes to eeprom. EEPROM.end() will also commit and release the ram copy of eeprom contents
 }