My modifications to the adalight ambilight code for fastled to use SK6812 RGBW Leds.
Go to file
David Madison 9a66ac9d61
Merge pull request #13 from dmadison/timeouts
Updated Timeouts
2017-12-04 20:05:22 -05:00
Arduino/LEDstream_FastLED Decreased default timeout 2017-12-04 19:51:02 -05:00
LICENSE Rename COPYING to LICENSE 2017-03-19 12:06:25 -04:00
README.md Linked ambilight project page 2017-06-08 19:34:55 -04:00

README.md

Adalight-FastLED

Adalight-Rainbow

Synopsis

This project modifies the Adalight protocol to use FastLED (fastled.io). This expands Adalight to, in theory, work with any supported FastLED strip including WS2812B (aka Adafruit NeoPixels).

In addition to ambilight setups, the protocol can be used to stream any color data over serial from a computer to supported LED strips.

For this sketch to work, you'll need to have a copy of the FastLED library. You can download FastLED from GitHub or through the libraries manager of the Arduino IDE. This program was writen using FastLED 3.1.3 - note that earlier versions of FastLED are untested and may not work properly.

For more information on my own ambilight setup, see the project page on PartsNotIncluded.com.

Basic Setup

Open the LEDstream_FastLED file in the Arduino IDE and customize the settings at the top for your setup. You will need to change:

  • Number of LEDs
  • LED data pin
  • LED type

Upload to your Arduino and use a corresponding PC application to stream color data. You can get the Processing files from the main Adalight repository, though I would recommend using Patrick Siegler's fork of Lightpacks's Prismatik, which you can find here.

Additional Settings

There are additional settings to allow for adjusting:

  • Max brightness
  • LED color order
  • Serial speed
  • Serial timeout length

There are also optional settings to clear the LEDs on reset, configure a dedicated ground pin, and to put the Arduino into a "calibration" mode, where all LED colors match the first LED. To help with flickering, the option to flush the serial buffer after every latch is enabled by default.

Debug Settings

The code includes two debugging options:

  • DEBUG_LED
  • DEBUG_FPS

DEBUG_LED will turn on the Arduino's built-in LED on a successful header match, and off when the LEDs latch. If your LEDs aren't working, this will help confirm that the Arduino is receiving properly formatted serial data.

DEBUG_FPS, similarly, will toggle a given pin when the LEDs latch. This is useful for measuring framerate with external hardware, like a logic analyzer.

To enable either of these settings, uncomment their respective '#define' lines.

Issues and LED-types

I've only tested the code with the WS2812B strips I have on hand, but so far it performs flawlessly. If you find an issue with the code or can confirm that it works with another chipset, please let me know!

Credits and Contributions

Thanks to Adafruit for the initial code and for developing the Adalight protocol. The base for the original FastLED modifications is this gist by James Bruce. Thanks James!

Pull requests to improve this software are always welcome!

License

Adalight is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

Adalight is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with Adalight. If not, see http://www.gnu.org/licenses/.