9a66ac9d61
Merge pull request #13 from dmadison/timeouts
...
Updated Timeouts
2017-12-04 20:05:22 -05:00
79edc6911d
Decreased default timeout
...
2:30 is a little long, don't you think?
2017-12-04 19:51:02 -05:00
564637b1db
Added 'off' setting for serial timeout
2017-12-04 19:43:20 -05:00
061ac5edfd
Fixed serial timeout overflow
2017-12-04 19:26:35 -05:00
0b28f24b2e
Evaluate timeouts on the second
2017-12-04 19:19:04 -05:00
377362df35
Merge pull request #12 from dmadison/development
...
'Serial Flush' and Housekeeping
2017-06-08 22:07:10 -04:00
9fa76f44ea
Linked ambilight project page
2017-06-08 19:34:55 -04:00
774316752e
Update README.md
2017-06-08 18:03:22 -04:00
aacedb9725
Moved 'clear on start' position in settings list
...
Emphasis on serial flush being enabled by default. Also looks better
visually.
2017-06-08 17:51:43 -04:00
fc4ccd693e
Added mode reset during LED clear
...
Prevents partial frames being shown if the LEDs are cleared in the
middle of data parsing.
2017-06-08 17:47:19 -04:00
4cb6aa1096
Removed 'max available' comment for baud rate
...
The code works at higher baud rates. My setup, currently, runs at 250000
baud.
2017-06-08 17:16:55 -04:00
84d5813852
Enabled 'serial flush' by default
2017-06-08 17:10:57 -04:00
cbc5252391
Removed 'protocol' from header comment
2017-06-08 17:06:36 -04:00
4bcf36b6cc
Changed mode to use enum
2017-06-08 17:04:22 -04:00
c559b3949f
Added serial buffer flush option
2017-06-08 16:28:17 -04:00
ed8eab001b
Added LGPL license
...
While the program is already licensed under LGPL, adding into the
program file itself to be clear.
2017-06-08 15:58:47 -04:00
edf0fef088
Increased max number of LEDs
...
21,845 should be the new max (untested)
2017-06-08 15:40:09 -04:00
d46782ca68
Removed date
...
No reason to keep track in both vc and the file
2017-06-08 15:34:57 -04:00
393a4ac102
Merge pull request #11 from dmadison/development
...
Separated Adalight Functions
2017-05-05 09:49:22 -04:00
9bde209fce
Added debug settings section
2017-05-05 09:45:20 -04:00
1e744591cc
Changed Lightpack link to point to release page
2017-05-05 09:34:50 -04:00
65e26ed88f
Updated date
2017-05-05 09:18:27 -04:00
203abb8740
Added additional comments
2017-05-05 09:16:01 -04:00
e9092c39fe
Removed 'loop' avoidance
...
Cleans up the code slightly. If the compiler is smart, the functions are
inlined regardless.
2017-05-05 09:05:47 -04:00
0e16794589
Changed 'SerialTimeout' to use seconds
...
More intuitive to set, no change in functionality
2017-05-05 08:20:23 -04:00
92e65abde7
Nested serial timeout check
...
Should give a significant performance improvement, reducing the delay
before a received byte is processed. Limits timeout periods to
increments of 1000, though.
2017-05-05 08:07:35 -04:00
92362303b8
Removed 'bytesRemaining' check
...
Slight efficiency improvement. In data mode bytes remaining is always
greater than 0, because the LED count is always set to greater than 0 in
the header setting. When it reaches 0 mode is immediately switched.
2017-05-05 07:54:41 -04:00
bd87f5f23b
Guarded magic word check if statements
...
Not explicitly needed, but no reason not to protect it
2017-05-05 07:33:00 -04:00
6910e162d7
Separated adalight into functions
...
Makes the code more readable and easier to modify
2017-05-05 07:28:29 -04:00
ec44b9335f
Added DEBUG_FPS macro
2017-05-05 05:40:40 -04:00
d42a83be45
Cleaned up debug LED implementation
...
Cleaner to use, and should be easier to add elsewhere in the future
2017-05-03 12:48:48 -04:00
1ec552edc2
Merge pull request #10 from dmadison/development
...
Function variables made explicitly static, bugfix for #9
2017-04-23 04:42:23 -04:00
4931d955ed
Update date
2017-04-23 04:35:10 -04:00
e57c61b1ea
Added static keywords to Adalight func variables
...
Should not be strictly necessary, but it was careless to omit them.
2017-04-23 04:32:03 -04:00
c24abb7393
Set mode variable as static
...
Chasing what I believe is a memory allocation issue, related to large
numbers of LEDs (#9 )
2017-04-19 21:31:39 -04:00
79c514bd59
Added DEBUG_LED feature
2017-04-18 22:52:37 -04:00
f3d194292d
Merge pull request #8 from dmadison/no-buffer
...
No buffer
2017-04-08 09:58:09 -04:00
8688131d6c
Updated date
2017-04-08 09:57:42 -04:00
4b92761bee
Merge branch 'master' into no-buffer
2017-04-08 09:55:21 -04:00
38e59172c3
Update README.md
2017-03-29 22:54:14 -04:00
1eca0f13e7
Added header image
2017-03-29 22:46:35 -04:00
91223e91e8
indexOut incremented independent of outPos
...
This resolves issue #5
2017-03-28 01:03:25 -04:00
b13d9f67c7
Changed 'outPos' to 16 bit
2017-03-27 22:59:53 -04:00
84fef87d35
Check if data can latch immediately
...
Prior to this change, code would wait for an additional byte before
latching.
2017-03-27 19:37:49 -04:00
eba7bdb73e
Changed MODE_DATA definition
...
Just because.
2017-03-27 19:26:36 -04:00
a766fb4910
Rewrote Adalight code to no longer use 256 byte buffer
...
The buffer was only being used to store the header information before
processing, otherwise data was retrieved immediately. Buffer and support
variables were causing more problems than anything else.
2017-03-27 19:20:55 -04:00
672f401a4d
Merge pull request #7 from dmadison/whitespace
...
Reworked whitespace
2017-03-27 17:58:11 -04:00
e14a46c63e
Duplicated loop function use comment
...
It takes slightly more space to duplicate the comment vs using an obtuse
reference to find another comment buried in the code.
2017-03-27 17:37:50 -04:00
3f62027cf0
Fixed whitespace
...
Tab > space.
2017-03-27 17:35:44 -04:00
7d9d3cb7c8
Update README.md
2017-03-27 15:49:47 -04:00
David Madison