add sensors

This commit is contained in:
interfisch 2020-08-16 11:09:12 +02:00
parent 7eb052c657
commit 2c55bf2b98
2 changed files with 33 additions and 149 deletions

View File

@ -8,9 +8,9 @@
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[env:esp01_1m]
[env:d1_mini]
platform = espressif8266
board = esp01_1m
board = d1_mini
framework = arduino
monitor_port = /dev/ttyUSB0
@ -19,5 +19,5 @@ monitor_speed = 115200
lib_deps =
DHT sensor library@1.3.10
Adafruit BMP085 Library@1.1.0
BH1750@1.1.4
Homie@3.0.0

View File

@ -1,71 +1,42 @@
//#define DEBUG
//ESP8266MOD als SMD Platine mit 1M Flash board=esp01_1m, statt wemos_d1
/*
* To Update configuration (wifi credentials) from data/homie/config.json:
* Connect to serial. On ESP-12E connect flash jumper
* Apply Power to ESP
* Optional: upload sketch pio run -t upload
* Flash SPIFFS data: pio run -t uploadfs
* Remove jumper, (reboot)
*/
#include "Arduino.h"
#include "DHT.h"
#include <Wire.h>
#include <Adafruit_BMP085.h>
#include <BH1750.h>
// data/homie/config.json hochladen mit platformio run --target uploadfs
/*
float humidityDHT; //[%RH]
float temperatureDHT; //[deg C]
float temperatureBMP; ///[deg C]
float pressure; // [hPa] BMP180
float light; //[Lux] LDR
bool movement //true bei pir output hight, false wenn low
float humidity; //[%RH] DHT
float temperature; //[deg C] DHT
float light; //[Lux] BH1750
bool movement //true bei pir output hight, false wenn low HC12?
*/
Adafruit_BMP085 bmp180;
//GPIO2 is blue led
DHT dht(13,DHT22,11); //default:11
#define DHTPIN D7 // Digital pin connected to the DHT sensor
//DHT dht(13,DHT22,11); //default:11
DHT dht(DHTPIN,DHT22,11); //default:11
#define PIRPIN 12
#define PIRPIN D6 //pir sensor needs 5v. output level is 3.3v
BH1750 lightMeter(0x23);
//timings
unsigned long lastsensorreadtime=0;
unsigned long sensorupdatedelay=60000; //delay for reading and transmitting
unsigned long lastPIRtime=0;
unsigned long PIRdelay=500;
unsigned long PIRdelay=100; //polling delay
bool motion=false;
unsigned long lastLDRtime=0;
unsigned long LDRdelay=5000;
int LDR_readcounter=0;
double LDRLightcommulative=0;
struct Values {
uint8_t id;
float humidityDHT; //[%RH]
float temperatureDHT; //[deg C]
float temperatureBMP; ///[deg C]
float pressureBMP; // [hPa]
float lightLDR; //[Lux]
int movementPIR; //[seconds with movement]
long rssi; //wifi rssi
};
Values values;
#include <Homie.h>
#define FW_NAME "sensoresp1"
#define FW_NAME "sensoresp3"
#define FW_VERSION "1.0.0"
@ -76,42 +47,26 @@ HomieNode sensorNode("sensors", "Sensors","sensors");
char tempstring[16]; //for dtostrf
// Light calibration data
// out[] holds the values wanted in lux/10
//measured 20160709
#define LDRARRAYSIZE 18
static const unsigned int out_ldr[] = {0, 30, 50, 60, 130, 170, 250, 420, 780, 1300,2600, 5000, 5350, 7700, 10900, 12000, 17000,20000}; // x10 (i.e. gets later divided by 10)
static const unsigned int in_ldr[] = {0, 12, 100, 150, 350, 400, 450, 650, 730, 780, 840, 930, 948 , 970, 993, 1005, 1019, 1023}; // 0 - 1023
void loopHandler();
double Light(int RawADC0);
double getAverageLight();
int get_lux(const unsigned int* _in, const unsigned int* _out, byte size);
void setup() {
Serial.begin(115200);
Serial.println();
Serial.println("Welcome");
pinMode(PIRPIN, INPUT); //pir movement sensor
Serial.println("initializing ldr pinmode");
pinMode(A0, INPUT); //ldr
pinMode(PIRPIN, INPUT);
values.id=1;
Serial.println("initializing dht");
dht.begin(); // data pin 2
//Wire.begin(12,14); //i2c for bmp180
Serial.println("initializing bmp180");
//bmp180.init();
if (!bmp180.begin()){
Serial.println("#ERROR: BMP180 init fail\n\n");
dht.begin(); // dht pins: 1=power, 2=data, 3=NC, 4=GND. 10k from data to power needed
Serial.println("initializing bh1750");
Wire.begin(); //initialize i2c. SDA=D2, SCL=D1
if (lightMeter.begin(BH1750::CONTINUOUS_HIGH_RES_MODE)) {
Serial.println(F("BH1750 Advanced begin"));
} else {
Serial.println(F("Error initialising BH1750"));
}
Serial.println("connecting..");
Homie_setFirmware(FW_NAME, FW_VERSION);
@ -119,10 +74,8 @@ void setup() {
Homie.setLoopFunction(loopHandler);
sensorNode.advertise("temperatureDHT");
sensorNode.advertise("temperature");
sensorNode.advertise("humidity");
sensorNode.advertise("temperatureBMP");
sensorNode.advertise("pressure");
sensorNode.advertise("light");
sensorNode.advertise("motion");
@ -156,17 +109,6 @@ void loopHandler() {
lastPIRtime=millis();
}
if (millis() >= (lastLDRtime+LDRdelay)){
LDR_readcounter++;
//LDRLightcommulative+=Light(analogRead(A0)); //read light value from adc
float ldr_read = get_lux(in_ldr, out_ldr, LDRARRAYSIZE)/10.0;
LDRLightcommulative+=ldr_read;
lastLDRtime=millis();
}
if (millis() >= (lastsensorreadtime+sensorupdatedelay))
{
Serial.println("Sending");
@ -179,8 +121,8 @@ void loopHandler() {
float temperatureDHT = dht.readTemperature();
if (!(isnan(temperatureDHT) == 1)){ //success
Homie.getLogger() << "temperatureDHT " << ": " << temperatureDHT << endl;
sensorNode.setProperty("temperatureDHT").send(String(temperatureDHT));
Homie.getLogger() << "temperature " << ": " << temperatureDHT << endl;
sensorNode.setProperty("temperature").send(String(temperatureDHT));
}
float humidityDHT = dht.readHumidity();
@ -191,18 +133,7 @@ void loopHandler() {
//values.temperatureBMP=bmp180.bmp085GetTemperature(bmp180.bmp085ReadUT());
float temperatureBMP = bmp180.readTemperature();
Homie.getLogger() << "temperatureBMP " << ": " << temperatureBMP << endl;
sensorNode.setProperty("temperatureBMP").send(String(temperatureBMP));
//values.pressureBMP=bmp180.bmp085GetPressure(bmp180.bmp085ReadUP())/100.0; //Pa in hPa
//values.pressureBMP=bmp180.readPressure()/100.0;
float pressureBMP=bmp180.readPressure()/100.0;
Homie.getLogger() << "pressure " << ": " << pressureBMP << endl;
sensorNode.setProperty("pressure").send(String(pressureBMP));
float light=getAverageLight();
float light = lightMeter.readLightLevel(); // [lux]
Homie.getLogger() << "light " << ": " << light << endl;
sensorNode.setProperty("light").send(String(light));
@ -210,51 +141,4 @@ void loopHandler() {
lastsensorreadtime=millis();
}
}
//////////////////////////////////////////////////////////////////////////////
// Calculate lux based on rawADC reading from LDR returns value in lux/10
//////////////////////////////////////////////////////////////////////////////
//quelle: https://groups.google.com/forum/#!topic/souliss/1kMAltPB2ME[1-25]
int get_lux(const unsigned int* _in, const unsigned int* _out, byte size)
{
// take care the value is within range
// val = constrain(val, _in[0], _in[size-1]);
unsigned int val = analogRead(A0);
#ifdef DEBUG //DEBUG++++++++++++++++
Serial.print("LDR RAW=: ");
Serial.println(val);
#endif
if (val <= _in[0]) return _out[0];
if (val >= _in[size-1]) return _out[size-1];
// search right interval
byte pos = 1; // _in[0] allready tested
while(val > _in[pos]) pos++;
// this will handle all exact "points" in the _in array
if (val == _in[pos]) return _out[pos];
// interpolate in the right segment for the rest
return map(val, _in[pos-1], _in[pos], _out[pos-1], _out[pos]);
}
double getAverageLight(){ //average all readings and reset
double ldravg=LDRLightcommulative/LDR_readcounter;
LDR_readcounter=0;
LDRLightcommulative=0;
return ldravg;
}