Commit Graph

50 Commits

Author SHA1 Message Date
David Madison e7175f82e2 Adds clock pin support for 4-wire strips 2018-10-18 17:49:43 -04:00
David Madison 0ffd98768e Refactor data pin as define
Allows putting the clock pin definition next to it
2018-10-18 17:49:43 -04:00
David Madison 173470ff31 Fixes unused variable warning for serial flush 2018-10-18 16:09:08 -04:00
David Madison 79edc6911d Decreased default timeout
2:30 is a little long, don't you think?
2017-12-04 19:51:02 -05:00
David Madison 564637b1db Added 'off' setting for serial timeout 2017-12-04 19:43:20 -05:00
David Madison 061ac5edfd Fixed serial timeout overflow 2017-12-04 19:26:35 -05:00
David Madison 0b28f24b2e Evaluate timeouts on the second 2017-12-04 19:19:04 -05:00
David Madison aacedb9725 Moved 'clear on start' position in settings list
Emphasis on serial flush being enabled by default. Also looks better
visually.
2017-06-08 17:51:43 -04:00
David Madison fc4ccd693e Added mode reset during LED clear
Prevents partial frames being shown if the LEDs are cleared in the
middle of data parsing.
2017-06-08 17:47:19 -04:00
David Madison 4cb6aa1096 Removed 'max available' comment for baud rate
The code works at higher baud rates. My setup, currently, runs at 250000
baud.
2017-06-08 17:16:55 -04:00
David Madison 84d5813852 Enabled 'serial flush' by default 2017-06-08 17:10:57 -04:00
David Madison cbc5252391 Removed 'protocol' from header comment 2017-06-08 17:06:36 -04:00
David Madison 4bcf36b6cc Changed mode to use enum 2017-06-08 17:04:22 -04:00
David Madison c559b3949f Added serial buffer flush option 2017-06-08 16:28:17 -04:00
David Madison ed8eab001b Added LGPL license
While the program is already licensed under LGPL, adding into the
program file itself to be clear.
2017-06-08 15:58:47 -04:00
David Madison edf0fef088 Increased max number of LEDs
21,845 should be the new max (untested)
2017-06-08 15:40:09 -04:00
David Madison d46782ca68 Removed date
No reason to keep track in both vc and the file
2017-06-08 15:34:57 -04:00
David Madison 65e26ed88f Updated date 2017-05-05 09:18:27 -04:00
David Madison 203abb8740 Added additional comments 2017-05-05 09:16:01 -04:00
David Madison e9092c39fe Removed 'loop' avoidance
Cleans up the code slightly. If the compiler is smart, the functions are
inlined regardless.
2017-05-05 09:05:47 -04:00
David Madison 0e16794589 Changed 'SerialTimeout' to use seconds
More intuitive to set, no change in functionality
2017-05-05 08:20:23 -04:00
David Madison 92e65abde7 Nested serial timeout check
Should give a significant performance improvement, reducing the delay
before a received byte is processed. Limits timeout periods to
increments of 1000, though.
2017-05-05 08:07:35 -04:00
David Madison 92362303b8 Removed 'bytesRemaining' check
Slight efficiency improvement. In data mode bytes remaining is always
greater than 0, because the LED count is always set to greater than 0 in
the header setting. When it reaches 0 mode is immediately switched.
2017-05-05 07:54:41 -04:00
David Madison bd87f5f23b Guarded magic word check if statements
Not explicitly needed, but no reason not to protect it
2017-05-05 07:33:00 -04:00
David Madison 6910e162d7 Separated adalight into functions
Makes the code more readable and easier to modify
2017-05-05 07:28:29 -04:00
David Madison ec44b9335f Added DEBUG_FPS macro 2017-05-05 05:40:40 -04:00
David Madison d42a83be45 Cleaned up debug LED implementation
Cleaner to use, and should be easier to add elsewhere in the future
2017-05-03 12:48:48 -04:00
David Madison 4931d955ed Update date 2017-04-23 04:35:10 -04:00
David Madison e57c61b1ea Added static keywords to Adalight func variables
Should not be strictly necessary, but it was careless to omit them.
2017-04-23 04:32:03 -04:00
David Madison c24abb7393 Set mode variable as static
Chasing what I believe is a memory allocation issue, related to large
numbers of LEDs (#9)
2017-04-19 21:31:39 -04:00
David Madison 79c514bd59 Added DEBUG_LED feature 2017-04-18 22:52:37 -04:00
David Madison 8688131d6c Updated date 2017-04-08 09:57:42 -04:00
David Madison 4b92761bee Merge branch 'master' into no-buffer 2017-04-08 09:55:21 -04:00
David Madison 91223e91e8 indexOut incremented independent of outPos
This resolves issue #5
2017-03-28 01:03:25 -04:00
David Madison b13d9f67c7 Changed 'outPos' to 16 bit 2017-03-27 22:59:53 -04:00
David Madison 84fef87d35 Check if data can latch immediately
Prior to this change, code would wait for an additional byte before
latching.
2017-03-27 19:37:49 -04:00
David Madison eba7bdb73e Changed MODE_DATA definition
Just because.
2017-03-27 19:26:36 -04:00
David Madison a766fb4910 Rewrote Adalight code to no longer use 256 byte buffer
The buffer was only being used to store the header information before
processing, otherwise data was retrieved immediately. Buffer and support
variables were causing more problems than anything else.
2017-03-27 19:20:55 -04:00
David Madison e14a46c63e Duplicated loop function use comment
It takes slightly more space to duplicate the comment vs using an obtuse
reference to find another comment buried in the code.
2017-03-27 17:37:50 -04:00
David Madison 3f62027cf0 Fixed whitespace
Tab > space.
2017-03-27 17:35:44 -04:00
David Madison cb8be4a190 Updated date 2017-03-27 15:22:53 -04:00
David Madison 972f0e7d0e Removed debug serial lines 2017-03-27 15:20:02 -04:00
David Madison 47305050b8 Added 'clear on start' flag 2017-03-27 15:14:02 -04:00
David Madison 8485478da5 Updated adalight data types 2017-03-19 18:53:10 -04:00
David Madison b591ed106a Cleaned up header settings 2017-03-19 18:48:14 -04:00
David Madison 090532f841 Changed settings to use constants
For type safety
2017-03-19 15:04:36 -04:00
David Madison 1a2b6b8a7b Rewrote calibration flag description 2016-12-21 14:13:59 -05:00
David Madison 2e1e3793a6 Removed byline in arduino header comment 2016-12-21 13:23:19 -05:00
David Madison e84ea6ab3f Changed filename reference in header comment 2016-12-21 12:39:00 -05:00
David Madison a4f429258f Renamed LEDstream_WS2812B folder 2016-12-21 12:33:09 -05:00